Advertisement
Product Releases
Subscribe to Wireless Design and Development

RF Coaxial Cable Assemblies

April 4, 2002 8:30 am | Comments

Custom manufacture subminiature to high-power RF coaxial cable assemblies that can include virtually any combination of connectors and varying sizes are being offered by Tru-Connector Corporation of Peabody, Massachusetts. Tru-Connector Custom RF Coaxial Cable Assemblies can include flexible and semi-rigid types ranging from 0....

Measurement Capability for Handset Components

April 4, 2002 8:30 am | Comments

Anritsu Company introduces the MS462xD series of Scorpion® Vector Network Measurement Systems (VNMS) that integrates mixed-mode S-parameters, embedding/de-embedding and arbitrary impedance features into the versatile network analyzer family. The new MS462xD Scorpion VNMS is a cost-effective solution for manufacturers that need to easily conduct fast and accurate measurements on both single-ended and balanced devices operating through 6 G...

1 W DC-DC Converters

April 4, 2002 8:30 am | Comments

The latest 3.3 V input, sub-miniature, 1 W dual-output DC-DC converters from C&D Technologies (NCL) offer significant space and component count savings to low-voltage industrial distributed power architectures requiring dual DC outputs from a single DC rail. Featuring a PCB footprint of 16....

Advertisement

Flip-Chip Array

April 4, 2002 8:30 am | Comments

ProTek Devices has introduced the LC0402FCxxC Series of TVS flip-chips, which are designed for the protection of high frequency data line circuits applications for handheld products. They are ideal for notebook computers, personal digital assistants (PDAs), cellular phones, and SMART cards. The LC0402FCxxC Series is capable of protecting up to one data I/O port....

Current Sensing Resistors

April 4, 2002 8:30 am | Comments

KOA Speer Electronics introduces its new line of current sensing surface mount resistors designed for lesser thermal expansion/contraction, allowing for fewer mismatches and/or separations between the part and the PCB. The unique open-center shapes of the LR72A/B/C series provide cooler operation as the flexible leads also allow for thermal expansion and aid in alleviating stress to the component....

Surface Mount BNC Connector

April 4, 2002 8:30 am | Comments

Trompeter announced the introduction of a new 75 ohm edge-mount circuit board BNC connector, the UCBJE20. The unique design of this gold plated connector features a center pin in-line with the plane of the board for superior signal performance (-23 dB return loss at 3 GHz). The pcb end of the UCBJE20 has a special drainage slot for fluid clean processing after soldering....

TWT Medium Power Amplifiers

April 4, 2002 8:30 am | Comments

MCL, Inc., a MITEQ company, offers three new options for its MT3200 series of TWT medium power amplifiers. The MT3200 is available in C-Band or Ku-Band with power up to 400W. The unique design of the MT3200 incorporates five internal field replaceable modules, which provide superior performance, reliability and maintainability for any transportable or fixed uplink application....

Broadband Noise Generators

April 4, 2002 8:30 am | Comments

Delivering up to one watt of white Gaussian noise, the new ANG series of Broadband Noise Generators from Atlantic Microwave Limited offers individual instruments with multi-octave coverage in the overall frequency range from 10 Hz to 18 GHz with possible extension to 40 GHz and beyond. Each instrument features step level control, including options, of up to 111 dB in 0....

Advertisement

Single Hybrid Transformer

April 4, 2002 8:30 am | Comments

Prem Magnetics' has introduced the SPT-060, a 600Ω:600Ω single hybrid transformer that connects a 2-wire port to a 4-wire transmit and receive port. It provides excellent performance in a small overall size. Even higher performance levels can be realized if it is connected in a dual hybrid configuration....

Ultraviolet LED

April 4, 2002 8:30 am | Comments

BivarOpto™, the Optoelectronics Division of Bivar, Inc., has introduced the industry's first high powered ultraviolet LEDs featuring typical intensities from 500 mcds (700 mcds maximum), with a typical stable wavelength of 400 nm. The new Ultraviolet LED Series is ideally suited for a wide range of specialty applications including currency validation in vending and change machines, automotive instrumentation, counterfeit bill detection/...

Cylindrical Connectors

April 4, 2002 8:30 am | Comments

Amphenol Industrial Operations introduced its new AMPHE-LITE line of connectors. This new commercial series of the 38999-type connectors provides an interconnect solution for a variety of harsh environment commercial/industrial applications, including power, signal, and RF. Key design features include a positive shell-to-shell coupling design, grounding fingers and Electroless Nickel plating to provide EMI shielding capability....

Coaxial Matrices

April 4, 2002 8:30 am | Comments

Dow-Key Microwave, a subsidiary of Dover Corp., introduces the CANBus-based Switch Matrix, P/N 4101-ENET, equipped with a built-in Ethernet port. This switch matrix is designed with a highly modular structure, permitting rapid assembly of customized systems. The 4101-ENET performs up to 18 GHz, providing a bi-directional switch matrix that can be configured with up to 10 inputs and up to 10 outputs....

Microwave Cables Provide High Shielding

April 4, 2002 8:30 am | Comments

Micro-Coax introduces the M-FLEX™ series of flexible microwave cable that provides good overall performance at higher frequencies. The durable M-FLEX cables offer improved loss and phase stability, making them well-suited for microwave signal transmission applications. Two M-Flex cable types are available, both of which have a maximum frequency of 18 GHz....

Quarter-Brick, DC/DC converters

April 4, 2002 8:30 am | Comments

Cherokee International LLC announced the Apollo series of single-output, 30-amp, quarter-brick, DC/DC converters. These point-of-load converters are ideal for telecom, datacom, automatic-test and semiconductor-fabrication equipment requiring high current, low voltage and fast transient-response times....

Hybrid Couplers

April 4, 2002 8:30 am | Comments

Florida RF Labs announces the HybriX™ 3 dB, 90° Hybrid coupler product group as the newest addition to the existing product lines of resistor products and high-end cable assemblies. The HybriX product group includes devices with power ratings of 100 and 150 watts. The HM Series of Mini-HybriX™ 3 dB, 90° Hybrid couplers are used with applications that require power ratings of 100 watts or less....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading