Pickering Interfaces Expands Range of Fault Insertion PXI Modules
Pickering Interfaces is expanding its range of PXI Fault Insertion solutions with the introduction of the 40-197 and the 40-198. Fault Insertion (FI) modules are used within an Automatic Test System to simulate common fault conditions such as an open, short to ground or a short to other connections in a device under test.
The 40-197 provides up to 34 fault insertion channels that can be connected to any of four fault bus connections, each having two 2 different conditions. Each fault insertion channel can switch up to 220 VDC at 60 W. Each channel can carry and hot switch 2 A continuously and up to 6 A carry for short duration surge currents. The 40-197 bridges the gap between Pickering’s simpler fault insertion offerings & more complex FIBO options also available from Pickering Interfaces.
The 40-198 supports up to 20 fault insertion channels that can be connected to one of two fault insertion buses, each of which has three optional fault definitions. With hot switching capabilities of up to 110 VDC and 150 W, each channel can carry and hot switch 5 A continuously and up to 10 A carry for short duration surge currents. The 40-198 is designed to fill a gap between Pickering’s 2A & 10A standard topology fault insertion solutions .
The two models use a switch design based around high quality electro-mechanical relays and in addition to being supported in any PXI compliant chassis, they can be supported in Pickering Interfaces Modular LXI Chassis’.
Pickering Interfaces offers the widest range of fault insertion modules available in the PXI platform, allowing users to choose the size and rating of the fault insertion channels they need from 2 A to in excess of 30 A. All fault insertion solutions are compatible with most common real time operating systems
For more information please visit, www.pickeringtest.com