Divide by 1 to 4 with Low-Noise Programmable Frequency Divider
Thu, 04/08/2010 - 1:18pm
Hittite Microwave Corporation introduces a low-noise, programmable frequency divider within a small 3 x 3 mm, leadless SMT, quad flatpack which is designed to accommodate power sensitive applications with uncompromising noise performance. The HMC794LP3E frequency divider provides four, hardware selectable, integer divider settings for input signals up to 2 GHz: divide-by-1-to-4. Phase noise performance levels (with fIN = 2 GHz) is typically below -160 dBc/Hz @ 100 kHz offset; tapering out to a residual noise floor below -166 dBc/Hz @ 10 MHz. The SiGe BiCMOS structures provide consistent output power regardless of divider setting, signal frequency, temperature, and supply voltage. The device is powered from a 5V supply, and incorporates a power down feature, good input-output isolation, external output power adjustment and 50% output duty cycle. HMC794LP3E is ideal for applications in which phase noise performance is the critical parameter, and/or require a selectable divide ratio, such as clock and LO signal generation for instrumentation, software defined radios, and multi-band synthesizers.