Product Releases

Software Radio PMC Module

Wed, 02/25/2009 - 10:46am
Pentek, Inc.'s Model 7153 digital down converter (DDC) is a 4-channel, high-speed digitizer PMC module designed for processing baseband RF or IF signals from a communications receiver. Four of these 200 MHz, 16-bit monolithic A/Ds in the front end of the Model 7153 deliver a previously unattainable combination of speed and resolution. In addition, these A/Ds exhibit a signal-to-noise ratio of 75 dBFS and a spurious-free dynamic range of 87 dBc at a 70 MHz input frequency. The Model 7153 DDC offers two modes of operation. The 2-channel DDC mode sacrifices 2 DDC channels to boost the maximum decimation to 65,536 and extend the lower bandwidth limit down to 3 kHz. The four-channel DDC mode provides an independently programmable decimation range from two to 256 on each DDC, covering signal bandwidths from about 700 kHz to 90 MHz.


Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.