Product Releases

NiMH/NiCd Fast Battery Charger

Thu, 12/08/2005 - 6:11am

Linear Technology Corporation introduces the LTC4010, a complete NiMH/NiCd battery charger product that requires no microcontroller or firmware programming. The LTC4010 includes charge initiation, monitoring, protection, charge termination and constant current control circuitry for a fast, autonomous charger device. The IC can fast charge 1- to 16-cell NiMH or NiCd batteries at rates up to 4 A from a range of input supplies and wall adapter voltages from 5.5 to 34 V. Both –Δ V and ΔT/Δt charge termination can be active simultaneously, in addition to a programmable safety timer. The LTC4010 is appropriate for use in portable instruments, diagnostic and control systems as well as back-up battery management equipment. The step-down constant current controller uses synchronous rectification to allow high current charging with high efficiency from input voltages up to 34 V. Furthermore, the LTC4010's 550 kHz operating frequency enables the use of small sized inductors and capacitors, minimizing printed circuit board area. Other features include battery qualification, recharge and Top-Off (for NiMH). The LTC4010 provides output signals for indicating READY, end-of-charge and FAULT status conditions. The LTC4010CFE is offered in the thermally enhanced 16-lead TSSOP package and is rated for operation from 0° C to 85° C.

Linear Technology Corporation




Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.