Advertisement
Product Releases
Subscribe to Wireless Design and Development

RF Cascode Amplifier Designed for Low Noise

September 28, 2001 9:40 am | Comments

A cost-effective, high isolation cascode amplifier using Silicon Germanium:Carbon (SiGe:C) technology has been introduced by Motorolan's Semiconductor Products Sector. This amplifier can help to simplify RF designs for 100 MHz to 2.5 GHz applications, and it is available in the ultra-small SOT-343R miniature surface mount package....

Power Amplifier Optimized for Linear Operation

September 28, 2001 9:40 am | Comments

Mimix Broadband announced the introduction of a gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC) two stage power amplifier optimized for linear operation with a typical third order intercept point (IP3) of +36 dBm. Using 0.15 micron gate length GaAs pseudomorphic high electron mobility transistor (pHEMT) device model technology, this power amplifier covers the 26 to 40 GHz frequency bands....

Three Way Power Splitters

September 28, 2001 9:40 am | Comments

Microlab/FXR announces 3 way Power Splitters that are 3G ready, covering the full 800 - 2,200 MHz with high performance specifications. Microlab/FXR Model D3-24FD Three Way Power Splitter evenly splits high power signals with minimal reflections, PIM (passive intermodulation) and minimal insertion loss at powers up to 700 W average power....

Advertisement

High Power Pulsed L Band High Power Pulsed L Band Solid State RF Amplifier

September 28, 2001 9:40 am | Comments

Aethercomm Part Number SSPA 1.20-1.40-100 is a high power, pulsed solid state amplifier used for military telemetry, data transmission and radar. This SSPA supports pulse widths up to 100 mSec with duty cycles from 0.1% to CW operation. Minimum output power is 100 watts at 85°C base plate. The unit will operate from -50°C to 95°C base plate....

SDRAM Multi-Chip Packages

September 28, 2001 9:40 am | Comments

White Electronic Designs' Registered 16 M × 64 and 16 M × 72 synchronous DRAM multi-chip packages are now available. The 128 Mbyte PBGA devices provide a glue-less connection to high performance memory controllers designed to complement PowerPC™ based systems. The registered versions are now available to enhance performance of bus speeds at 66 MHz and 100 MHz....

Complete System Clock Module

September 28, 2001 9:40 am | Comments

Connor Winfield introduces the STM-S3E, a complete system clock module for Stratum 3E timing card applications in accordance with GR-1244-CORE, GR-253-CORE, and ITU-T-G813. The STM-S3E provides a reliable backplane clock reference to line cards for use in TDM, PDH, SONET, and SDH network equipment....

Successive Approximation Register ADC

September 28, 2001 9:40 am | Comments

The AD7484 is a 14-bit SAR (successive approximation register) ADC. It offers a parallel interface with throughput rates up to 3 MSPS. A 12-bit version — the AD7482 — is also available. Interfacing is via standard control lines making the converters directly compatible with microcontrollers and DSPs....

Vertical Power Strips

September 28, 2001 9:40 am | Comments

Pulizzi Engineering released the VPC1917 Vertical Power Strips for use in telecommunication, frame relay, and server racks where maximizing rack space is key to system design. The VPC1917 system stands 70 long × 2 wide × 2 deep and are available in configurations for North America and Europe....

Advertisement

Oscilloscopes

September 28, 2001 9:40 am | Comments

Tektronix recently introduced a new series of mid-range oscilloscopes. The new TDS5000 family of digital phosphor oscilloscopes (DPO) consists of three instruments that offer high-performance features that satisfy the needs of engineers designing electronic products. The 1 GHz, 4 channel TDS5104 allows for accurate viewing of fast clock signals and pulse edges....

Flip Chip Device

September 28, 2001 9:40 am | Comments

ProTek Devices has introduced the SFC05-5, a 5-volt penta transient voltage suppressor (TVS) flip chip device designed to provide protection for power bus, data, control, or I/O lines. The SFC05-5 is a type of chip scale package (CSP) that can be mounted onto a printed circuit board or in a connector requiring a limited amount of space, and is compatible with "pick and place" equipment for automatic assembly....

Current Sense Transformers

September 28, 2001 9:40 am | Comments

Pulse announces a new series of 35-amp surface mount current sense transformers for the DC/DC converter market. Applications range from industrial controls and medical instruments to RAID arrays and high performance network servers. Functions include feedback control, overload sensing, load drop or shutdown detection....

Technology Improves Cooling Air Flow

September 28, 2001 9:40 am | Comments

Tracewell Systems announced the availability of Advanced Vector Controlled Air Flow (AVCAF) Technology, a design method that provides cooling and reliability of VME, VXI, cPCI, proprietary bus systems, and the latest high-power switch fabric architectures. AVCAF delivers a highly uniform flow of cooling air within each slot in a system chassis, without creating a substantial increase in air flow resistance....

System Chassis Design and Interconnect Hardware

September 28, 2001 9:40 am | Comments

Tracewell Systems has introduced a series of system chassis products based on interconnect boards that make it possible to integrate a full-size PCI Mezzanine Card (PMC), two external PMC sites, and one embedded PMC/PCI slot in an EIA 1U or sub-1U chassis. These packages facilitate the creation of some of the most space-efficient rack-mount computer packages available for telecom/datacom, data acquisition, and other industrial computing app...

Through Hole Vertical DC Power Jack

September 28, 2001 9:40 am | Comments

Kycon introduces its latest product designed for DC power applications, the through-hole vertical DC power jack. This power jack is ideal for portable devices, such as laptop computers, CD players and digital cameras. This through-hole vertical power jack from Kycon is UL94V-0 rated, made of black PBT thermoplastic and rated to 3....

Clock Terminator Networks

September 28, 2001 9:40 am | Comments

A line of specialized clock terminator networks for use in applications involving high frequency clock signals is now available from KOA Speer Electronics. In sophisticated applications, detrimental problems such as signal undershoot, overshoot, and reflections can lead to timing and signal degradation....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading