Advertisement
Product Releases
Subscribe to Wireless Design and Development

Antenna Measurement Application Note

April 30, 2001 8:04 am | Comments

Designers tasked with testing antenna performance can now access a new application note from Giga-tronics titles "Using the 1200A for Antenna Measurements." Created for use with the company's high-performance, low cost 20 GHz Microwave Synthesizer, the application note describes and diagrams techniques and equipment requirements for both far and near field measurements....

Surge Protector in a Weather Resistant Enclosure

April 30, 2001 7:57 am | Comments

The new DCWR48 Surge Protector, available from AC Data Systems, provides high capacity surge protection in a weather resistant enclosure to protect outdoor or indoor equipment common to broadband, wireless installations. Rated for use in – 20 ° C to 80 ° C temperatures, the DCWR48 hardwires to DC power cables to safeguard outdoor equipment such as radio towers, or indoor rectifiers, power systems, and other sensitive electronics...

Switch Mode AC/DC Chargers for Mobile Phones and PDAs

April 30, 2001 7:57 am | Comments

New compact switch mode AC/DC power supplies are available from Advanced Power Conversion. Designed to meet the OEM market's charging requirements for mobile phones, PDAs, and other electronic equipment, the chargers are available in 2 watt to 5 watt platforms and can be supplied with all styles of AC mains pins....

TOPICS:
Advertisement

Self-Adhesive Stencils Simplify BGA Rework

April 30, 2001 7:57 am | Comments

Flextac Stencils simplify BGA rework. These self-sticking laser cut, polymer solder paste stencils use a residue-free adhesive similar to Post-it® Notes to seal around BGA pads to ensure that solder paste will not bleed under the stencil when the paste is applied. Disposable Flextac Stencils are easy to use and will not leave any residue on the board surface....

Frequency Hopping Wireless OEM Modules

April 30, 2001 7:15 am | Comments

Cirronet™ announced the WIT2410, the latest in its line of frequency hopping spread spectrum wireless modems for use in the 2.4 GHz band. The device offers lower cost as well as significant enhancements over its WIT2400 predecessor, including seamless roaming capabilities and a doubled air data rate of 460 kbps....

PLL Clock Generators

April 30, 2001 7:10 am | Comments

AMI Semiconductor (AMIS) expanded its clock generator product line today when it introduced a broad family of low-cost 1- and 2-phase-lock loop (PLL) clock integrated circuits (ICs). Compact footprints, multiple pin-out options and generation of common frequencies make this line of standard timing devices the ideal "workhorse" for dependable clock management in fixed-frequency systems, such as digital cameras, computer peripherals, ...

Key Fob Enclosure

April 30, 2001 7:10 am | Comments

Polycase has launched its newest plastic enclosure for the electronics industry, the FB-20 Key Fob. This enclosure features a slender design with an hourglass shape for an ergonomic, handheld fit. The FB-20 enclosure comes in black ABS plastic and is available in five styles — from one single gray rubber button or up to five buttons total....

Line of Chargers

April 30, 2001 7:10 am | Comments

Cell-Con now offers charging systems which will work with all rechargable chemistries including Lithium Ion, NiMH, NiCd, and lead acid.. Complete systems are available to OEMs who require portability in their products. Technical support is offered for quantities of all sizes along with fast turnaround time on prototypes and production....

TOPICS:
Advertisement

Automated High Density System

April 30, 2001 7:10 am | Comments

Remstar's new CubeStar automated high density system combines both hardware and controls to provide up to an additional 50% of storage capacity per unit by increasing the units storage efficiency. Remstar's design and technology when combined with the Shuttle Vertical Lift Module's (VLM) 1 adjustability, allows each tray to be stored in the least amount of vertical space needed to maximize vertical cube....

Mechanical Angle

April 30, 2001 7:10 am | Comments

Piher expands its line of controls, position sensors, potentiometers, and encoders with the introduction of the new N-15 Series. This product features a low 4 mm profile, 36-° mechanical angle and electrical angle up to 340°, SMD or through-hole mounting, and 3% absolute linearity. It is available with 1% absolute linearity on a custom order basis....

Antireflective Films

April 30, 2001 7:10 am | Comments

Dontech announces new antireflective films to improve contrast ratio and readability of electronic displays. Dontech's new VAR-GARD™ Series of optical enhancement films provide specular antireflective properties to reduce front surface glare and improve light transmission from LCDs, VF, EL, CRTs, and other types of displays....

Carrier Class Enclosures

April 30, 2001 7:10 am | Comments

One Stop Systems announces the introduction of the Millennium Gold 8U Carrier Class enclosure for mission-critical wireless, Internet, and telephony applications. This rackmount enclosure puts more functionality into less space than any enclosure of its type and class. It boasts a 16-slot backplane with the H....

Front Accessible Offline Servo Amplifier

April 30, 2001 7:10 am | Comments

Advanced Motion Controls announced the availability of its new B25A20FAC brushless DC, trapezoidally commutated, PWM servo amplifier. Front panel accessibility of all connections and a removable screw terminal motor connector make this drive ideal for panel mount applications. Commutation is achieved using Hall sensors....

Surface Mount TCXO/VCXO

April 30, 2001 6:15 am | Comments

Piezo Technology introduces a new surface mount TCXO/VCXO product for wireless applications. Model XO3080 is available for frequencies between 10 and 125 MHz offering ± .75 ppm over the temperature range of – 30 ° C to 70 ° C. This unit features a 5 volt supply, good phase noise performance, and superior aging performance housed in a ....

Off-Line Switcher ICs

April 30, 2001 6:15 am | Comments

Power Integrations, Inc announced the availability of a new generation of energy efficient, low power off-line switcher ICs. The new family of devices, named TinySwitch-II, maintains the simplicity of the previous TinySwitch line while providing additional features and lowering system cost. The output power capability has also been increased to 23 Watts (15 Watts with a universal input), making it an ideal energy efficient, cost-effective s...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading