Advertisement
Product Releases
Subscribe to Wireless Design and Development

SUR Wire-to-Board Connector

January 29, 2002 3:56 am | Comments

JST Corporation announces the release of the super compact Series SUR wire-to-board connector. The connector is highly suited to high density electronic such as VCRs, Digital cameras, PDAs, etc. The SUR connectors are available with 2, 8, 12, 14, 16, 18, & 20 positions and are rated at 0....

2 W Single-In-Line (SIP) DC/DC Converters

January 29, 2002 3:56 am | Comments

Now available form MicroPower Direct, the E200 series is specifically designed to provide 2 W of isolated outpower in an ultra-miniature 4-pin SIP package. Eighteen models operate from inputs of 5 VDC, 12 VDC, 24 VDC or 48 VDC, and provide single outputs of 3.3 VDC, 5 VDC, 9 VDC, 12 VDC, or 15 VDC....

2500 VA Inverter

January 29, 2002 3:56 am | Comments

UNIPOWER Telecom's new INV2500-HS telecom inverter is a hot-swap inverter producing 115 VAC at 22 amperes RMS to give 2500 volt-amperes output. The unit has the best power density in the industry with its 2 U (3.5 inch) high by 8.5 inch wide by 12 inch deep package. The companion 2 U hot-swap shelf allows for two 2500 VA inverters to be operated in redundant, 1+1 mode or non-redundant at 5000 VA output....

Advertisement

Multi-Chip Module SRAM

January 29, 2002 3:56 am | Comments

Maxwell Technologies introduces the 89C1632 high-performance 16 Megabit Multi-Chip Module (MCM) SRAM, featuring a greater than 100 krad (Si) total dose tolerance. The product's four 4-Megabit SRAM die and bypass capacitors are incorporated into a high-reliability hermetic 68-pin quad and flat-pack ceramic package....

Bluetooth Full Module

January 29, 2002 3:56 am | Comments

Taiyo Yuden the development of a fully integrated Bluetooth v1.1-compliant Full Module for next-generation automotive applications, including sound systems, navigational/telematics devices and Bluetooth-based hands-free kits. Incorporating chipsets from its technology partner, Texas Instruments, the robust new Taiyo Yuden Bluetooth Automotive Module is a Class 2 Device (max 4dBm output) designed for harsh automotive industry temperature spe...

Signal Tester

January 29, 2002 3:56 am | Comments

Anritsu Company introduces the MD8480A W-CDMA Signaling Tester, a solution that is used for verification of 3GPP W-CDMA mobile stations and mobile station chip sets. Simulating a W-CDMA base station, the MD8480A is used in the development phase to verify the modulation and demodulation function of the mobile station or chipset, confirm call processing functionality between the base station and mobile station, and to simulate application....

LDMOS Power Amplifier Module

January 29, 2002 3:56 am | Comments

UltraRF unveiled its PFM21020 RF Power Amplifier Module that is designed with the company's UltraGOLDII™ LDMOS technology for infrastructure level performance. The PFM21020 represents the first in a planned range of high-power 50 ohm amplifier modules designed specifically to meet the stringent linearity requirement of 3G wireless infrastructure systems....

Bluetooth Power Amplifiers

January 29, 2002 3:56 am | Comments

Maxim Integrated Products introduces the MAX2244/MAX2245/MAX2246 family of 2.4 GHz power amplifiers (PA) designed for Bluetooth Class 1 radio modules. The PAs integrate a closed-loop power control circuit that enables a near constant output power over full temperature (-40°C to +85°C), voltage supply (+3....

Advertisement

Ultra Miniature TCXO

January 29, 2002 3:56 am | Comments

Rakon Limited has developed a 5 × 3 mm crystal oscillator package suited to space constraints of wireless devices. This tiny SMD oscillator has an extended temperature range of -40 to 85°C and accepts voltage levels from 1.5 V to 5.5 V. This TCXO employs an analog IC for the oscillator and temperature compensation giving excellent temperature stability performance....

Single-chip Transceiver

January 29, 2002 3:56 am | Comments

Chipcon's CC1000, a very low power CMOS RF transceiver is qualified for data rates up to 76.8 kbit/s. The extended data rate with a maximum of 76.8 kbit/s makes the CC1000 ideal for numerous applications requiring data rates higher than 19.2 kbps. At 76.8 kbit/s a receiver sensitivity of -100 dBm can be achieved....

Transceiver for Low Power Radio

January 29, 2002 3:56 am | Comments

RF Monolithics introduces the TR1100, a 1 Mbps version of their second-generation ASH transceiver. The TR1100 operates at 916.5 MHz and is intended for use in North America under FCC 15.249 or Canadian RSS-210 1.2.2 low-power radio regulations. The miniature TR1100 transceiver is characterized for operation at data rates from 128 kbps to 1 Mbps using amplitude-shift keyed modulation....

VCO for EDGE Basestations

January 29, 2002 3:56 am | Comments

Z-Communications introduces a VCO ideally suited for EDGE base stations. The V613ME05 generates frequencies between 2110 and 2170 MHz while exhibiting a silent signal. Realizing a spectral purity of -105 dBc/Hz, the V613ME05 is still able to attenuate the second harmonic to better than -30 dBc. It covers the bandwidth within a 0....

Surface Mount Stratum 3 Oven Controlled Crystal Oscillator

January 29, 2002 3:56 am | Comments

Designers of base stations and timing products will appreciate the tight frequency stability and low jitter of Connor-Winfield's new Oven Controlled Crystal Oscillators. Frequency calibration is ± 1.5 ppm at time of shipment. Output is HCMOS compatible and meets stability requirements of Stratum 3 applications....

Frequency Source Oscillator

January 29, 2002 3:56 am | Comments

TRAK Microwave introduces a low cost frequency source oscillator, model 10-656-9200 used in SONET OC-192, clock recovery PLL and clock timing applications. With very low phase noise, the oscillator offers excellent harmonics and frequency stability. Features include an output buffer amplifier and a 20 MHz tuning range from -5 volts to +5 volts....

Bluetooth Multichip Module

January 28, 2002 3:29 am | Comments

Ericsson Microelectronics' ROK 101 007 is a complete Bluetooth multichip module (MCM) solution for cable replacement and point-to-multipoint applications. It provides robust performance with up to 7 slave units and incorporates onboard firmware to provide a standardized Host Controller Interface (HCI) for host-based applications....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading