Advertisement
Product Releases
Subscribe to Wireless Design and Development

Filter Plates

April 10, 2001 10:27 am | Comments

To solve electromagnetic interference, Custom Assembly, an affiliate of The Phoenix Company of Chicago, has developed a new Filter Plate Assembly product line. Low pass filter types including C, L and Pi filters will be available for both standard and low profile designs. These preassembled plates eliminate the time and resources typically needed to install solder-mount filters and are ideal for difficult mounting requirements....

Telecom Handle

April 10, 2001 10:25 am | Comments

A new CompactPCI Injector/Extractor handle designed specifically for the high density packaging needs of the telecommunications market has been introduced by Pentair Electronic Packaging, as part of its Schroff® line of CompactPCI and VME64X packaging solutions. The new IET Schroff handle has a depth of ....

LCD With On-Board Temperature Compensation Circuit

April 10, 2001 10:24 am | Comments

optrex has introduced the F-51136 NCWHU-FW-AA-4.2 STN 256 × 64 LCD, a full color RGB transmissive graphic display offering a wide viewing angle. It features a cold-cathode fluorescent (CCFL) backlight with a 25,000 hour (typical) lifetime to half brightness point. An on-board, 12 V heater and integrated temperature compensation circuit enable a wide operating temperature range of – 30 ° C to 85 ° C....

Advertisement

RF LDMOS High Power Transistors

April 10, 2001 10:21 am | Comments

Motorola, Inc. introduces a new family of RF power plastic LDMOS devices optimized for 1.0 GHz base station applications. Fully characterized and individually tuned to operate at frequencies to 1.0 GHz, this family of RF LDMOS devices is housed in the TO-270 RF power plastic package. The TO-270 is a JEDEC registered, two-lead RF power plastic package....

GPS Filters and Diplexers

April 10, 2001 10:20 am | Comments

Microwave Support Systems introduced a new series of GPS Filters and Diplexers covering the 1575 MHz and 1227 MHz bands. Features include typical mid band insertion loss of 0.8 dB, 1 dB bandwidth of 25 MHz, ± 50 MHz rejection of 35 dB, and ± 100 MHz rejection in excess of 60 dB. Standard configuration is TNC Female connectors....

Transistor Insulators

April 10, 2001 10:17 am | Comments

Micro Plastics announces a new line of transistor insulators. The insulators are molded in Nylon 6/6 material and can be ordered in black Glassfilled Nylon upon request. Micro Plastics' Transistor are designed to separate the mounting screw from the transistor. Parts are available in two sizes ranging from ....

Microwave Cables

April 10, 2001 10:16 am | Comments

MICRO-COAX introduces the UTiFORM family of tim-dipped microwave cables, alternatives to semi-rigid and flexible cables. Featuring excellent attenuation and VSWR, UTiFORM cables can be used in a variety of commercial and military applications, including satellite and space flight. The UTiFORM cables have a higher temperature rating than semi-rigid cables and an equivalent bend radius....

Micropower Boost Converter

April 10, 2001 10:14 am | Comments

A micropower boost converter capable of driving white LEDs and providing LCD bias is now available from Micrel Semiconductor for use in cellular phone and PDA applications. The MIC2142 was designed and developed by Micrel. Housed in an IttyBitty™ SOT23-5 packaging, and requiring three external components, the MIC2142 is ideal for portable, space-sensitive applications like cellular phones and PDAs....

Advertisement

Low Voltage Power Supervisors

April 10, 2001 10:13 am | Comments

A pair of dual ultra-low-voltage supervisor ICs for monitoring power supplies as low as 300 mV has been developed by Micrel Semiconductor. Available in Micrel's IttyBitty™ SOT23-5 packaging, the MIC2774 and MIC2777 feature a choice of preprogrammed voltage options and ultra-low quiescent current....

Coaxial Loads

April 10, 2001 10:11 am | Comments

MECA offers low power, 50 ohm loads precisely designed for cost effective solutions. The 462-1F3 is an SMA-male coaxial termination ideally suited for low power applications dissipating 1 watt average power (250 watts peak) with typical VSWR of 1.05:1 to 3 GHz. The 401-1F3 is an N-male coaxial termination that dissipates 2 watts average power (1 kW peak) with typical VSWR of 1....

Rework System

April 10, 2001 10:10 am | Comments

M-9100AV rework system from Manncorp automatically calculates alignment, places the component, and solders it — all while requiring no more operator involvement than a few clicks of the mouse. M-9100AV, unlike split-vision systems, requires minimal training and no calibration. Nor does it rely on the operator's eyesight or his ability to visually align components — the system's software does all the work....

Surface Mount LED

April 10, 2001 10:07 am | Comments

Lumex introduced a new series of right-angle surface mount technology (SMT) light-emitting diodes (LEDs) that solve the off-the-board height problem traditionally associated with this type of device. Lumex's new SMF-LX2432 Series features a 1.4 mm (0.055 inch) distance between the light center of the LED and the top of the circuit board, as opposed to the more common 0....

Small Computer System Interface Connectors

April 10, 2001 10:05 am | Comments

Kycon recently announced the release of the K77 series of Small Computer System Interface (SCSI) connectors, one of the industry's commonly used input/output interfaces. The K77 series offers the standard SCSI connector in 50 pin (SCSI II) and 68 pin (SCSI III) designs. The stamped pins are phosphor bronze for superior contact retention, and the body is PBT thermoplastic, UL94V-0 Rated....

Tapped Filter Networks For EMI/RFI Suppression

April 10, 2001 10:03 am | Comments

Tapped filter networks for the suppression of EMI/RFI noised are now available from KOA Speer Electronics. These components are designed to filter out the high frequency content of digital signals and are commonly used in I/O ports and other high frequency/high speed applications. The standard KOA Speer LFA series networks in a low profile, 20-pin QSOP style, can replace 16 individual discrete components....

Coin Cell Holders

April 10, 2001 10:01 am | Comments

Keystone Electronics offers a new holder for quick and easy installation of 2032 lithium coin cells in high density applications. The dual-spring contacts are polarized to assure proper installation. These new holders retain cells securely under shock and vibration. The surface mount version is available in bulk (Part #1060) and on tape and reel (Part #1060TR) and is compatible with most vacuum and mechanical pick and place assembly syste...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading