Advertisement
Product Releases
Advertisement

Power Entry Modules

Tue, 09/02/2003 - 8:42am

LISTED UNDER:

Schurter introduces series DC11 and DC12 power entry modules. The unit combines an AC inlet, with optional EMC filter, and a rocker style switch recessed in the unit to prevent accidental actuation. The in-rush rating of the switch is 100 Amps for 3 to 4 milliseconds, 5 Amps continuous. Lifetime is rated for 50,000 cycles at 10 Amps/250 volts. It is available for 1- or 2-pole switching, unlighted or lighted. Units nap-in or screw-on mount and come pre-wired between the inlet and switch. Screw mount types can be affixed to the front or rear of the chassis. The low band pass filter is optimized to attenuate noise < 1 MHz in both common and differential modes. Performance above 1 MHz is also optimized by approximately 10 dB attenuation. Current ratings range from 1 - 10 Amps/250 volts.

www.schurter.com; (800) 848-2000

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading