Advertisement
Product Releases
Advertisement

Flip Chip TVS Arrays

Mon, 05/06/2002 - 7:16am
     ProTek Devices has introduced the U0402FCxxC Series, an unbumped flip chip TVS array. Required on unpopulated PCBs when solder print can't be controlled to the recommended minimum requirements, the U0402FCxxC Series is designed for small circuit board applications with limited size and space. All devices are bidirectional, making them ideal for differential line protection on I/O ports. Plus, they are available in the single die (0402) configuration ranging from 3.3 to 36 volts.

To reduce installation costs, and act as a space saver, the flip chip series can be mounted directly on the printed circuit board similar to chip resistors and capacitors. Mounting instructions are provided upon request. These devices can also be used with the R/C or L/C components for a combined TVS protection and filter network.

The U0402FCxxC Series meets the ESD requirements of IEC 61000-4-2 (EN61000-4-2) air and contact discharge. They have been tested up to 25,000 volts of contact ESD conditions, and provide protection for both positive and negative transient events. This series is rated for 250 watts peak pulse power dissipation for an 8/20 µs waveform. SPICE parameters and models are available upon request from the factory.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading