Advertisement
Product Releases
Subscribe to Wireless Design and Development

Family of RF Attenuators

July 31, 2001 6:30 am | Comments

Honeywell Solid State Electronics Center recently unveiled its family of high-performance RF attenuators with six standard configurations. Developed using Honeywell's CMOS Silicon-On-Insulator (SOI) technology, the 5- and 6-bit attenuator features include single or dual rail operation, extremely low DC power consumption, 3....

The Networked Car

July 31, 2001 6:29 am | Comments

Wireless Bluetooth technology to convert cars into mobile networked multimedia devices By Dr. Bernard Frank, SiemensVDO Automotive AG, Car Communication Division, & Jim Alfred, Wind River Systems, Inc. If you have ever heard the term "car infotainment" and wondered what it meant, picture yourself on a long drive, stuck in endless traffic, or in search of directions in a strange city, and suddenly the need for both informa...

CMOS Bluetooth RFIC Design Considerations

July 31, 2001 6:17 am | Comments

Capturing the promise of Bluetooth in hardware requires a high level of integration. By John Notor, Tality Bluetooth wireless networking technology continues to stimulate the imagination of the wireless industry as a low cost, low power, and small footprint networking solution which can replace wired connections to consumer devices....

Advertisement

Design Consideration For A High Performance Production Test Cable

July 31, 2001 6:17 am | Comments

By Robert Thiele, Semflex Today's market demands shorter product development cycles while simultaneously applying constant pressure to reduce costs and increase performance. The goal is to accomplish more with less, while doing it better and faster. In test and measurement, the specific challenge is to accurately and efficiently characterize components and systems, measure performance, verify design integrity and ensure consistent quali...

Wireless-Internet-On-A-Chip

July 31, 2001 5:21 am | Comments

Intel Corporation unveiled an experimental computer chip based on a new process technology that combines the core components of today's cellular phones and handheld computers. This integrated, "wireless-Internet-on-a-chip" technology could enable a new era of wireless Internet-access products with extensive battery life and greater processing power....

Broadband Digital Attenuators

July 31, 2001 5:21 am | Comments

Hittite Microwave Corporation offers a product family of seven low cost 2, 3, and 5 Bit configurations; Digital Attenuator ICs. Offering bandwidth from DC to 4 GHz, positive bias and control, and ± 0.2 to ± 0.5 dB typical accuracy. Input IP3 performance of 44 to 54 dBm characterizes these attenuators, satisfying today's linearity requirements for Cellular, PCS, 3G, ISM, and Broadband Digital data systems....

Digital Attenuator with High Attenuation Accuracy and Low Insertion Loss

July 31, 2001 5:21 am | Comments

Alpha Industries introduces the AA113-310 IC, a 6-bit digital attenuator with driver that features low loss, high attenuation accuracy, and single positive voltage control per bit. The high performance and low frequency of the AA113-310 IC make it well suited for IF gain control circuits in base stations, as well as for wireless data, broadband, and wireless local loop applications....

Programmable Attenuator

July 31, 2001 5:21 am | Comments

RF Micro Devices offers the RF2420 — a multistage monolithic programmable attenuator for digital power control in communication systems such as cellular transceivers and TETRA. This GaAs MESFET IC has attenuation programmability over a 44 dB range in 2 dB steps, with 4 dB of insertion loss. The attenuation is set by 5 bits of digital data....

Advertisement

Attenuator and Phase Shifter Combined in Surface Mount Package

July 31, 2001 5:21 am | Comments

The Micro-Precision Technologies MPT-1820-APS and MPT-2023-APS combines an attenuator and phase shifter into a single surface mount package. Both the attenuator and phase shifter are variable and can be controlled from separate voltage or current sources. The APS features low insertion loss (less than 2 dB combined), low group delay (less than 100 ps combined), and low intermodulation products (typically 45 dBm)....

RF Modules

July 31, 2001 4:35 am | Comments

Radiotronix designs, manufactures, and markets a broad selection of RF transmitter, RF receiver, and RF transceiver modules. Their modules provide an "off-the-shelf" embedded wireless solution for engineers that are designing wireless products. The EWM-900-RS232 is a full-duplex RS-232 data transceiver....

Low Power CMOS RF Transceiver

July 31, 2001 4:35 am | Comments

The last transceiver released by Chipcon has been specifically designed to comply with the most stringent requirements of the low power radio market. The CC1000 is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. Based on a 0.35 (m CMOS technology this is the only product in the market offering a unique combination of low cost, high integration, performance and flexibility, thus sett...

RF/Microwave Interconnects

July 31, 2001 4:30 am | Comments

The Tensolite Q-Flex & Q-Flex Plus Assemblies are flexible alternatives for Semi-Rigid Custom products using Tensolite's LLF coaxial cables. It will extend the useful life of the assembly by using Tensolite's Anti-Torque connectors, while improving deadlines, ease of design, eliminate tooling, and reduce the overall cost by using Q-Flex....

Installation Training Program in CD-ROM

July 31, 2001 4:30 am | Comments

Trompeter announced the availability of a newly updated Installation Training Program in CD-ROM and VHS Format. This professional instructional course helps technicians improve the time and quality of coax terminations. The program is complimentary upon request and includes step-by-step instructions for consistent, high quality strip and crimp terminations of the coax DS3 line....

DSP Programming Environment

July 31, 2001 4:30 am | Comments

Analog Devices announced the availability of VisualDSP++ release 2.0, the latest development environment for programming digital signal processors (DSP) from Analog Devices. Key features include the addition of the VisualDSP++ Kernel (VDK), which allows code to be implemented in a structured, easy to scale manner by supplying a controlled infrastructure used by applications; an integrated development and debugger environment that is now con...

A/D Converter

July 31, 2001 4:30 am | Comments

Signal Processing Technologies, Inc. (SPT) announces the SPT7720, an 8-bit 200 MSPS analog-to-digital converter (ADC) that delivers superior AC and DC performance. With its low power dissipation (430 mW), high bandwidth (500 MHz), and low price, the SPT7720 offers a very attractive alternative to the nearest competitor....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading