Advertisement
Product Releases
Subscribe to Wireless Design and Development

Surface-Mount Frequency Synthesizer

May 22, 2001 10:42 am | Comments

EM Research offers LX-Series low-cost, surface-mount frequency synthesizers, which are custom designed for broadband mixer L.O. applications. This product features fixed frequency or programmable outputs in bands from 50 MHz to 2700 MHz, with up to octave bandwidths (at fc < 600 MHz). At 1 GHz frequency output, phase noise characteristics are - 98 dBc/Hz at 10 KHz offset and - 120 dBc/Hz at 100 KHz offset....

VoIP and VoATM Evaluation and Reference Platform

May 22, 2001 10:42 am | Comments

Spectrum Signal Processing announced the availability of the aXs.110, the first in a series of Voice over Internet Protocol (VoIP) and Voice over Asynchronous Transfer Mode (VoATM) Evaluation and Reference Platforms. The aXs.110 is a self-contained unit that allows customers to directly evaluate Spectrum's new aXs architecture based on Broadcom Corporation's BCM1500 CALISTO processor, and to rapidly incorporate aXs voice-processing products...

Thermal Sensing IC

May 22, 2001 10:42 am | Comments

Rohm Electronics has introduced the BU9817-FV four-channel thermal sensing IC that, in combination with external thermistors, provides an ideal solution for thermal management and over-voltage monitoring functions for portable systems. Connection to external thermistors produces an effective thermal sensing circuit in which a host system is able to set function parameters and obtain data via the I 2 C bus....

Advertisement

Bluetooth&#153 Module

May 22, 2001 10:42 am | Comments

Taiyo Yuden Co., Ltd. announced today that its Bluetooth™ Module is the first full module in the world to earn certification for compliance with the requirements of Bluetooth Specification Version 1.1. The company has certified two variations of its Class 2 module, one with a USB interface and one with a UART interface....

3-Port Cards

May 22, 2001 10:42 am | Comments

Unique new 3-Port cards from CyberResearch put three 115-kbaud RS-232 ports on one PCI or ISA card. The three 9-pin male DB connectors fit nicely on a single backplate. No wasted slots, no clumsy "octopus" cables. Just maximum convenience in minimum space. You can easily find one and two-port cards....

RJ45 With Integrated Magnetics Over Dual USB

May 22, 2001 10:42 am | Comments

Kycon Inc. has just released the RJ45 with 10/100 Base-T Ethernet integrated magnetics over two A-type USB connectors. The integrated magnetics eliminate the need for a separate magnetics package, and the combination of the RJ45 and dual USB has proven to be a great space saver on the PCB board....

Surge Protected Switch

May 22, 2001 10:42 am | Comments

AC Data Systems introduces the new SPECTX MTS-ATS, a Surge Protected Energy Center/Transfer Switch (SPECTX™) with a field upgradable transfer switch. The UL 1008 listed integrated load center features a patented new design in switching technology from Electric Equipment & Engineering Co., which allows an in-field conversion from a manual transfer switch (MTS) to an automatic transfer switch (ATS)....

36 to 31 GHz Leaded Package for LMDS and KA-Band Operations

May 22, 2001 10:42 am | Comments

StratEdge announced the availability of a new 25 to 31 GHz leaded package designed for easy manufacturing of devices with high thermal management need. The new product, StratEdge part number 580403, is a leaded product for commercial applications that performs at Ka-Band. Prior to this, leaded package from StratEdge were available from DC to 23 GHz....

Advertisement

High IP3 Amplifier: +45dBm

May 15, 2001 8:06 am | Comments

WJ Communications introduces a new line of high performance amplifiers starting with the AH101. Designed for high linearity applications, the AH101 is ideally suited for use in today's high performance RF radios for base stations (BTS), Cable Modem and WLL terminals. The AH101 is a broadband amplifier that is unconditionally stable over the frequency range of 50-1500 MHz....

Compact High-Isolation Switch

May 15, 2001 8:06 am | Comments

Trilithic's 5300 Series electromechanical switches are designed for ATE systems, transmission path test sets, and other systems that demand extremely high isolation, low insertion loss, and a moderate switching speed of less than 10 ms. The 5300 Series switches combine port-to-port isolation of 80 dB and insertion loss of 0....

Determining Signal Booster Output Power for In-Building Systems

April 30, 2001 8:18 am | Comments

By Steve Blum, Radio Frequency Systems The FCC in CFR 47 part 90.219 approves signal boosters for use in the 800/900 MHz Land Mobile and Public Safety spectrum. This article discusses the deployment of Class B (broadband) signal boosters for in-building service improvement. Due to their low cost and ease of installation, Class B signal boosters are being installed throughout the Americas to improve in-building radio communications....

How to Choose the Perfect Battery

April 30, 2001 8:18 am | Comments

Demand for smaller, sleeker portable communications devices, is pushing the wireless industry harder than ever to reduce the size of rechargeable batteries. Ritch Russ, Toshiba America Electronic Components, Inc. Driven by increased consumer demand for smaller, sleeker portable communications devices, the wireless industry is pushing harder than ever to reduce the size of rechargeable batteries to help stimulate a stagnant market....

TOPICS:

Are the Governments Bankrupting the Telecommunication Companies?

April 30, 2001 8:17 am | Comments

David A. Case NCE, Cisco Systems David A. Case NCE, Cisco Systems davecase@cisco.com. It seems worldwide one of the biggest moneymakers for government coffers is the auctioning of frequency bands. I am not saying that the bands should be given away, but maybe the overall process needs to be changed....

TOPICS:

Switching Handbook

April 30, 2001 8:04 am | Comments

The Fourth Edition of Keithley Instruments' free Switching Handbook is now available. This useful reference is designed to help test system developers understand how to reconcile diverse and conflicting switching requirements when designing the switch systems needed to automate their applications....

Software Development

April 30, 2001 8:04 am | Comments

A new brochure detailing real-time and embedded systems software development capabilities has been published by RTSoft. The four page, color brochure highlights RTSoft's ability to provide complete solutions to clients by building on its library of software and integration tools. The range of RTSoft services and capabilities listed in the brochure include software development, systems integration, expertise in real-time operating systems, a...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading