Advertisement

Tracking Generator with CW Generator for Spectrum Master Analyzers

May 15, 2012 11:29 am | Product Releases | Comments

Anritsu Company introduces a tracking generator for its Spectrum Master™ MS2711E, MS2712E, and MS2713E models that enhances the overall performance of the handheld analyzers, while making it easier and faster for field technicians to conduct additional measurements. With the tracking generator installed, the Spectrum Master analyzers can be used by service providers, R&D engineering, contractors, installers, public safety organizations, and broadcast stations to conduct highly accurate measurements and improve efficiency when deploying, installing, and maintaining networks.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum
Advertisement

Vector Signal Generator Reduces Costs, Increases Yield

May 11, 2012 7:58 am | by Posted Janine E. Mooney, Editor | Product Releases | Comments

Anritsu Company introduces the MG3710A series, a family of innovative vector signal generators that combines high performance and eliminates the need for multiple instruments, thereby reducing operating costs and increasing production yield for designers and manufacturers of multi-system devices and base stations.

LISTED UNDER: Test and Measurement, Signal Generators

Agilent Offers Industry's Most Advanced PC-Based Oscilloscope Analysis Application

April 18, 2012 6:24 am | Product Releases | Comments

Agilent has announced the industry's most advanced PC-based oscilloscope analysis software. The N8900A InfiniiView application allows engineers to view and analyze previously captured signals from oscilloscopes made by Agilent and other vendors. The need to have a target system and an oscilloscope available simultaneously can cause debugging and testing bottlenecks.

LISTED UNDER: Test and Measurement, Oscilloscopes

Saelig Introduces USB 16-bit 5MHz Oscilloscope

March 7, 2012 5:54 am | Product Releases | Comments

Saelig has introduced the PS4262, a 2 channel, 5 MHz 16-bit-resolution oscilloscope that includes a built-in low-distortion signal generator. PS4262 is a full-featured oscilloscope, with a function/arbitrary waveform generator that includes a sweep function to facilitate rapid frequency response analysis.

LISTED UNDER: Test and Measurement, Oscilloscopes

High-Performance Optical Switch Enables New Levels of Agility for Data Center Infrastructure

February 29, 2012 7:00 am | Wireless Design & Development | Product Releases | Comments

Polatis has announced its new Series 6000 Optical Matrix Switch - a fully non-blocking, all-optical singlemode fiber cross-connect for up to 192x192 fiber ports with less than 1dB typical optical loss. The Series 6000 doubles the maximum matrix size previously available from Polatis and is based on Polatis' patented DirectLight® optical switch technology, featuring leading-edge optical performance with enhanced energy efficiency and port density.

LISTED UNDER: Transmission, Other | Test and Measurement, Power Meters

Saelig Introduces Tiny DIP Oscilloscope Module

February 22, 2012 10:17 am | by Posted Ron M. Seidel, Editorial Intern | Product Releases | Comments

Saelig has introduced Xminilab - an amazingly sophisticated miniature combination of three electronic instruments: a mixed signal oscilloscope, an arbitrary waveform generator, and a protocol sniffer. Measuring only 3.3” x 1.75”, it can be mounted directly on a breadboard or pcb for in situ testing and verification.

LISTED UNDER: Test and Measurement, Oscilloscopes

Family of Low-cost Broadband Signal Analyzers

February 13, 2012 6:01 am | Product Releases | Comments

Aeroflex  announced a new family of three low-cost broadband signal analyzers. These analyzers locate, record, and analyze complex communications signals for commercial, military, and aerospace applications. Based on Aeroflex’s successful Broadband Signal Analyzer (BSA) family, the Scout, Hunter, and Explorer signal analyzers offer market-leading performance at very attractive prices.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Teseq's New Immunity Test System Offers Fully Automated Switching

February 8, 2012 10:21 am | Wireless Design & Development | Product Releases | Comments

Low-cost, high performance RF switch doubles switching capabilities Teseq has expanded its ITS 6006 immunity test system to include the new SW 6012 RF switch option. This low-cost, high performance switching unit doubles the number of available switches within the system, enabling the ITS 6006 to fully automate the operation of three or four interconnected RF amplifiers during radiated EMC emissions testing.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Power Meters

New Family of Low-cost Broadband Signal Analyzers

February 1, 2012 11:40 am | Product Releases | Comments

Aeroflex announced a new family of three low-cost broadband signal analyzers. These analyzers locate, record, and analyze complex communications signals for commercial, military, and aerospace applications. Based on Aeroflex’s successful Broadband Signal Analyzer (BSA) family, the Scout, Hunter, and Explorer signal analyzers offer market-leading performance at very attractive prices.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Precision Waveform Analyzer Module with Industry-Best Performance

February 1, 2012 11:37 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies introduced a precision waveform analyzer for engineers involved in design verification and validation of high-speed electrical communications systems and components. With industry-best residual jitter (below 50 femtoseconds), channel bandwidths to 50 GHz and integrated clock recovery to 32 Gb/s, the Agilent 86108B precision waveform analyzer gives engineers confidence they are seeing the true performance of their designs.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Receivers, Other

WiFi Spectrum Analyzer and Power Meter Accessory is iPhone-based

December 6, 2011 9:28 am | Product Releases | Comments

Saelig Company, Inc. has introduced WiPry-Combo – said to be the world's first dynamic power meter and spectrum analyzer accessory for the iPad, iPod Touch, and iPhone. Made by Oscium, WiPry-Combo turns an iOS device into an ultraportable spectrum analyzer and dynamic power meter. It brings RF power measurements to a graphical interface to show RF waveforms like an oscilloscope â€“ instead of showing voltage, RF amplitude is displaye...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Test and Measurement, Power Meters

PIM Analyzer Covers the 900 MHz Band

November 30, 2011 11:16 am | Product Releases | Comments

Anritsu Company introduced the MW8209A PIM Master, a passive intermodulation (PIM) analyzer that covers the 900 MHz band to address the growing need to measure PIM in E-GSM networks, including UMTS Band VIII and LTE Band 8. Designed for use with the company’s handheld analyzers, the MW8209A comes with Anritsu’s Distance-to-PIM technology, which can determine if the cause of PIM is at the base station or in the surrounding environment.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

RF Instrument Family Adds Digital Signal Generators and Vector Signal Analyzers

November 15, 2011 4:52 am | Product Releases | Comments

Aeroflex Limited announced it is adding two new S-Series digital signal generators — the SGD in both 3 GHz and 6 GHz models — and is also launching two new vector signal analyzers—the SVA, available in a 6 GHz and a 13 GHz model. The S-Series uses the company’s PXI technology and features a touch-screen interface.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Test and Measurement, Signal Generators

Three-Phase Power Quality Analyzers Directly Measure Energy Wasted in Electrical Systems

November 10, 2011 5:06 am | Product Releases | Comments

Fluke Corporation, the global leader in portable electronic test and measurement technology, introduces the Fluke® 430 Series II three-phase power quality analyzers, the first tools to use a patented algorithm to measure energy waste and quantify its cost. The 430 Series II helps facilities reduce electrical power consumption and improve the performance and lifespan of electro-mechanical equipment by providing the ROI justification to mitigate power quality distortion.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Tektronix Announces Industry’s Fastest Coherent Lightwave Signal Analyzer

November 2, 2011 10:37 am | Wireless Design & Development | Product Releases | Comments

Tektronix announced the OM4106D Coherent Lightwave Signal Analyzer – the first coherent test system with 33 GHz bandwidth support. This industry-fastest performance is achieved through tight integration with the DPO70000D Series oscilloscopes for exceptional real-time performance along with purpose-built algorithms with best laser phase tolerance, no pattern length limitation and insightful displays for fast analysis and debugging of high...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum | Receivers, Other

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading