Advertisement

New Double-ridged Horn Antenna from PMM

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Teseq has introduced a double-ridged horn antenna from PPM that has a frequency range of 6 to 18 GHz.  The new PMM DR-01 is designed for radiated emissions and immunity applications, featuring an antenna factor of 36 to 41 dB/m and excellent sensitivity for emissions measurements...

LISTED UNDER: Test and Measurement, Other

Maxim Analog Integration Solutions

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Maxim Integrated Products will demonstrate their integrated analog solutions at this year’s Embedded World Exhibition and Conference in Nuremberg, Germany (February 25 – 27, 2014). One of the solutions that will be demonstrated includes the energy measurement solution...

LISTED UNDER: Embedded Systems & Networking | Test and Measurement, Other

S-Series Signal Generators Improve Phase Noise Performance

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Aeroflex, a subsidiary of Aeroflex Holding, has enhanced its S-Series signal generators (SGA and SGD) with improved phase noise and better RF level accuracy. The addition of wideband analog modulation and ARB (Arbitrary Waveform Generator) sequence mode provides internal AM, FM, and phase modulation. ARB sequence mode allows the user to set up a sequence of waveforms...

LISTED UNDER: Digital Hardware, Other | Test and Measurement, Other
Advertisement

Agilent Technologies Expands PNA-X Network Analyzer for Active Device Test

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Agilent Technologies has expanded the world’s most flexible PNA-X family of network analyzers with an 8.5 GHz model that more economically supports lower-frequency devices used in wireless communication applications...

LISTED UNDER: Embedded Systems & Networking | Test and Measurement, Analyzers, Other

Rohde & Schwarz's Signal & Spectrum Analyzer with 500 MHz Analysis Bandwidth

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Rohde & Schwarz has expanded the analysis bandwidth for its R&S FSW high-end signal and spectrum analyzers to be used for measurements in a frequency range up to 67 GHz, enabling completely new applications for the signal and spectrum analyzer in research and development. The analyzer is well-suited for sophisticated measurement tasks in radar or satellite applications as well as for tests on fast wireless connections such as WLAN or Beyond 4G (5G). Features include...

LISTED UNDER: Test and Measurement, Frequency Meters | Test and Measurement, Signal Generators

Maulflex Conduit System for Ground Support Test Equipment in Harsh Environments

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

TE Connectivity has presented the Maulflex conduit system, a light-weight, flexible, and customizable shielded electrical conduit system for rugged environments within the aerospace industry...

LISTED UNDER: Filters, IC | Test and Measurement, Military / Aerospace

Elma’s New 3U VPX Module

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Elma Electronic has introduced a high speed controller and storage module that supports up to eight SATA III ports and over 2 terabytes (TB) of onboard capacity in a single 3U VPX slot...

LISTED UNDER: Boards & Modules | Test and Measurement, Other

Agilent Technologies Announces ENA Series Network Analyzer

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Agilent Technologies has announced the E5063A ENA Series network analyzer, a low-cost ENA solution for manufacturing test. The instrument offers optimized performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables, and filters. It can also be used...

LISTED UNDER: Antennas, Other | Test and Measurement, Other
Advertisement

Rohde & Schwarz Announces New EMC Test Solutions

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Rohde & Schwarz has announced the R&S CEMS100, an off-the-shelf solution for EMS testing in line with IEC/EN 61000-4-3. The R&S ESR EMI test receiver covers the frequency range from 10 Hz to 26.5 GHz, and features...

LISTED UNDER: Amplifiers, Other | Test and Measurement, Other

Broadband Amplifier Line from Teseq Offers Low Distortion, Reliability

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Teseq has expanded its broadband amplifier line to include a Class A linear and low distortion model that operates from 10 kHz to 400 MHz with a rated power level of 260 watts.  Used in commercial or in-house EMC test laboratories, the CBA 400M-260 is ideal for automotive, military, and aerospace bulk current injections (BCI) applications...

LISTED UNDER: Amplifiers, Other | Amplifiers, Power | IC

Megger’s New Handheld Instrument Aids in Solar Panel Positioning

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Megger has introduced the PVM210, a handheld irradiance meter that aids in locating the most appropriate site to place solar panels. Designed with both the solar detector and meter inside the unit, the PVM210 provides...

LISTED UNDER: Power, Other | Software, Test | Test and Measurement, Other

Teseq’s100 A, 3-Phase Burst Pulse CDN for EFT Testing

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Teseq has introduced a 100 A, 3-Phase burst pulse coupling/decoupling network designed for electrical fast transient or burst testing. The new manual CDN 3083-B100...

LISTED UNDER: Embedded Systems & Networking | Test and Measurement, Other

Higher Performance Load Cells from Measurement Specialties Offer Improved Reliability

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Measurement Specialties has enhanced its series of ELAF compression and tension load cells to provide superior resolution and higher reliability, while remaining extremely cost-effective. Several parameters, including compensated temperature range, input voltage and lead lengths, are customizable within the standard load cell packaging to suit specific application requirements...

LISTED UNDER: Power, Other | Test and Measurement, Other

Times Microwave Systems' Unique Times-Protect LP-SPT RF Lightning Protection Tester

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Times Microwave Systems  has introduced the new Times-Protect LP-SPT RF surge protection tester, which provides the user with the capability to test any lightning protection device or component to ensure its proper functioning and capability to protect critical and expensive RF equipment...

LISTED UNDER: Test and Measurement, Analyzers, Other

Pasternack Releases Expanded Lines of Medium and High Power RF Loads

May 2, 2014 8:42 am | by WDD Staff | Product Releases | Comments

Pasternack Enterprises has released all new lines of medium and high power RF loads. These new RF loads are commonly used in military/aerospace, defense and test and measurement applications...

LISTED UNDER: Filters, EMC / RFI | Test and Measurement, Military / Aerospace | Test and Measurement, Other

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading