Advertisement

Signal Generators

October 28, 2003 10:16 am | Product Releases | Comments

Novatech introduces model 2910B/RACK, a four channel DDS signal generator in a 1U rack mount instrument case. The 2910B/RACK outputs four programmable frequencies that can be independently set to any value between 100 Hz and 300 MHz with a resolution of 1 μHz. Each frequency is provided on two buffered output connectors, for a total of eight outputs, which are factory configured as +13 dBm sinewaves, TTL clock signals or differential cl...

LISTED UNDER: Test and Measurement, Signal Generators

Network Analyzer

September 2, 2003 8:28 am | Product Releases | Comments

Agilent introduces frequency coverage capabilities up to 110 GHz for the PNA Series microwave vector network analyzers, as well as pulsed-RF and antenna measurement. The N5250A series provides frequency coverage from 10 MHz to 110 GHz. The series features two built-in sources, 32 measurement channels, 64 traces, and 16,0001 points per channel....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Signal Analyzers

July 30, 2003 9:51 am | Product Releases | Comments

The R3681 is a hybrid measuring solution that integrates the capabilities of a spectrum analyzer, modulation analyzer, vector signal generator and arbitrary waveform generator. With a specified average noise level of – 156 dBm/Hz and 26 dBm typical third-order intermodulation distortion, the R3681 has a dynamic range of 142 dBm....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum
Advertisement

Logic Analyzers

July 30, 2003 9:51 am | Product Releases | Comments

Tektronix' TLA5000 Series logic analyzers – TLA5201, TLA5202, TLA5203, TLA5204 – feature 50 ps (2 GHz)/32 Mb deep memory timing simultaneous with 125 ps MagniVu™ acquisition. The instruments include iView™ (Integrated View) capability to view, trigger on and characterize digital and analog characteristics of signals....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Protocol Analyzer

July 30, 2003 9:51 am | Product Releases | Comments

The HCI Tracer is an HCI analyzer system designed to capture, decode, and analyze Bluetooth HCI traffic. HCI Tracer allows users to probe RS232 connections, UARTs and/or BlueCore interfaces. The HCI Tracer software system runs on a portable or desktop PC and connects to Bluetooth Implementations Under Test via the HCI probe....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

USB Analyzer

July 8, 2003 11:09 am | Product Releases | Comments

Computer Access Technology Corporation (CATC) announces the USBMobile HS analyzer. The analyzer is in PC-card format and is able to detect, capture, decode, analyze, and display all USB speeds (1.5 Mbps, 12 Mbps and 480 Mbps). In addition to the new Hi-Speed capture feature, USBMobile HS provides support of the On-The-Go (OTG) specification and mass storage decodes....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Function Generator

July 8, 2003 11:09 am | Product Releases | Comments

Novatech announces the Model 2904A, a precision DDS function generator in a tabletop instrument case. The 2904A outputs Sine, Cosine and TTL signals simultaneously. The Sine and Cosine output amplitudes are programmable with 12-bits of resolution for up to 24 dBm (10 Vpp into 50 Ω) output power....

LISTED UNDER: Test and Measurement, Function Generators

Digital Storage Oscilloscopes

July 2, 2003 9:58 am | Product Releases | Comments

Nicolet Technologies introduces a 8 page, color brochure on the Sigma digital storage oscilloscope. The Sigma series integrates high accuracy signal acquisition, analysis capabilities and a Windows PC in a family of products. The brochure describes the various Sigma models, packaging and design, and specifications....

LISTED UNDER: Test and Measurement, Oscilloscopes
Advertisement

Noise Calibration Standards

July 2, 2003 9:47 am | Product Releases | Comments

Noise Com announces the NBS-Series of broadband Noise Calibration Standards for calibration laboratories, radiometer test and verification, and low noise amplifier tests. Using a low-loss waveguide horn design, Noise Com isolates the cold parts from the waveguide, which is controlled at ambient temperature, and avoids condensation of humidity and errors from temperature gradients....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Noise Generator

June 2, 2003 6:41 am | Product Releases | Comments

Noise Com introduces the UFX-7126 Series Noise Generator, programmable noise generators for testing WLAN receivers. The UFX-7126 covers both the 2.5 GHz and the 5 GHz bands used by the 802.11 a and b standard WLAN, HyperLAN as well as the coming 802.11 g and h equipment. The UFX-7126 gene4rates white Gaussian noise from 2....

LISTED UNDER: Test and Measurement, Noise Generators

Communication Analyzer

May 30, 2003 11:38 am | Product Releases | Comments

CDMA2000 1X hardware and software options enable the MTA8820 Radio Communication Analyzer to test wireless mobile terminals according to IS-2000 and 3GPP2 standards. With the measurement software installed, the MT8820A can conduct very high-speed transmitter and receiver measurements of CDMA2000 1X wireless phones and Internet appliances in R&D, production, and maintenance stages....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Oscilloscope Family

March 28, 2003 9:42 am | Product Releases | Comments

The Agilent 2.5 GHz oscilloscope provides four full-bandwidth, 20 GSa/s channels. The Agilent 54853A 2.5 GHz oscilloscope is part of the Infiniium 54850 oscilloscope family. The 54853A can capture four, full-bandwidth, real-time single-ended and differential signals off a single trigger event. The system's MegaZoom deep memory increases the amount of information that users can capture from events leading up to, and after, the specified trig...

LISTED UNDER: Test and Measurement, Oscilloscopes

RF Power Analyzer

February 25, 2003 12:13 pm | Product Releases | Comments

Keithley's Model 2800 RF Power Analyzer is optimized for high speed RF testing of wireless phones, RFIC power amplifiers, and related RF power devices. This compact, ready-to-run instrument comes pre-configured with the appropriate frequencies, channel numbers, offsets, etc. specific to the latest wireless standards....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

RF Peak Power Meters

February 25, 2003 12:12 pm | Wireless Design & Development | Product Releases | Comments

Boonton Electronics' 4400/4500 Series peak power meters offer an option enabling the instrument to trigger on events, as well as time. This allows a user-selected pulse to be captured, even when its timing is variable. The 4400A is for viewing and analyzing RF power in the time domain. Fast display updates and GPIB measurements save time and gather information fast....

LISTED UNDER: Test and Measurement, Power Meters | Test and Measurement, Power Meters

Software for Analyzers

February 25, 2003 12:07 pm | Product Releases | Comments

Agilent introduces a software application for its spectrum analyzer families, which allows multichannel power amplifier (MCPA) designers to achieve the lowest possible distortion and highest linearity with the least amount of effort and complexity. The 8960A distortion test suite can be used with Agilent ESA-E or PSA Series spectrum analyzers or 89600 Series vector signal analyzers....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading