Advertisement

Using a Wireless Network Analyzer to Debug a ZigBee Protocol System

February 13, 2007 10:32 am | Product Releases | Comments

by Kim Otten, Microchip Technology Inc. Messages and beacons that appear when a device joins a ZigBee Protocol network can reveal some interesting facts. The short range wireless networking market is set click to enlarge Figure 1: When you fire up the ZENA Wireless Network Analyzer, messages similar to these should appear when a device joins the network....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

RF Signal Generator

February 9, 2007 5:02 am | Product Releases | Comments

Agilent Technologies, Inc. announces its N9310A RF Signal Generator. It covers ranges from 9 kHz to 3 GHz and a full range of modulation types including AM, FM, phase modulation, pulse modulations and an optional IQ modulator. With an external IQ source, it can generate I/Q modulated signals such as GSM, CDMA and OFDM....

LISTED UNDER: Test and Measurement, Signal Generators

RF Vector Signal Generator for EVM

February 2, 2007 4:48 am | Product Releases | Comments

PrecisionWave Corporation announces the release of the p1511A, a low-cost RF Vector Signal Generator. The p1511A generates digitally modulated and CW signals in the 800 to 1000 MHz and 1700 to 2200 MHz cellular bands for developers and testers of cellular technology-based products. The instrument’s I/Q generator produces high-accuracy signals for any digital modulation scheme used in these bands....

LISTED UNDER: Test and Measurement, Signal Generators
Advertisement

RF Vector Signal Generator

December 27, 2006 11:10 am | Product Releases | Comments

PrecisionWave Corporation introduces its p1411A high-performance RF Vector Signal Generator. The instrument delivers suitable phase noise performance, wide power range and fast reliable electronic switching. The source includes an exclusive spectrum analyzer display along with an internal IQ waveform generator and is available in bench-top or ATE configurations....

LISTED UNDER: Test and Measurement, Signal Generators

Vector Signal Analyzer

November 20, 2006 4:53 am | Product Releases | Comments

The National Instruments PXI-5661 is a modular 2.7 GHz RF vector signal analyzer with wide real-time bandwidth, optimized for automated test in a compact, 3U PXI package. It is suitable for high-throughput RF acquisition and measurements. The 20 MHz wide onboard quadrature digital downconverter (DDC) significantly reduces the required load size and the time needed to transfer waveform data to the host controller or PC....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Portable Oscilloscope

November 16, 2006 11:10 am | Product Releases | Comments

AEMC® introduces the OX 7104 –CK portable oscilloscope It’s a 12-bit fully four-isolated-channel 600V Cat III rated scope on the market. Up to eight traces can be on the screen. This all-in-one portable and rugged hand-held instrument features five complementary tools: an oscilloscope, FFT analyzer, TRMS multimeter, harmonic analyzer and recorder.

LISTED UNDER: Test and Measurement, Oscilloscopes

PXI RF Analyzer

October 19, 2006 8:40 am | Product Releases | Comments

National Instruments announces three new products that extend high-speed data acquisition and data streaming into RF and communications applications. With the new RF vector signal analyzer and two new IF digitizers that include advanced FPGA-based signal processing, engineers can continuously stream high-bandwidth RF data across high-speed buses directly to a PC for processing and analysis....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Oscilloscope Helps Locate Problems Faster

October 11, 2006 11:22 am | Product Releases | Comments

LeCroy Corporation introduces three oscilloscope models that expand the bandwidth of the WaveRunner Xi and WaveSurfer Xs product lines. LeCroy is also launching WaveScan™— an advanced search and analysis feature — as standard on all WaveSurfer Xs and WaveRunner Xi oscilloscopes. WaveScan provides the ability to locate problems faster by going beyond hardware triggering, and integrating advanced algorithms to continuously scan fo...

LISTED UNDER: Test and Measurement, Oscilloscopes
Advertisement

Signal Analyzer

August 14, 2006 6:48 am | Product Releases | Comments

Anritsu Company has introduced the MS2781B Signature HighPerformance Signal Analyzer that integrates a full suite of physical layer measurements of both fixed and mobile WiMAX signals. It also delivers good spectrum analyzer measurement performance and speed for analysis of advanced RF signals used in wireless communication networks....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Spectrum Analyzer and Phase Noise Tester

August 14, 2006 6:48 am | Product Releases | Comments

Rohde & Schwarz has introduced the R&S FSUP, an instrument designed for measuring phase noise and characterizing RF signal sources. The instrument combines a spectrum analyzer and phase noise tester covering 8, 26.5 or 50 GHz. When measuring phase noise, the instrument compares the signal from the device under test with a reference signal source, using its internal reference or an external reference....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum

Power Meter

July 10, 2006 8:51 am | Product Releases | Comments

Berkeley Varitronics Systems introduces YellowFrog™, a portable, rugged, low-cost power meter. YellowFrog is Berkeley's latest handheld power meter measuring between 800 MHz and 2.2 GHz with an accuracy of + 0.5 dB. Unlike most Berkeley products, this one is connected directly to Gator™, Dragon™, Lizard or any CW transmitter with a type N out (or adapter) for instant verification of power levels in dBm or W....

LISTED UNDER: Test and Measurement, Power Meters

Signal Generators up to 6.6 GHz

June 5, 2006 11:44 am | Product Releases | Comments

National Instruments announces seven signal generators for applications from DC to microwave. The RF and microwave signal generators extend PXI to 6.6 GHz for continuous-wave (CW) sourcing, common tunable local oscillator (LO) and stimulus-response applications. All seven generators use direct digital synthesis (DDS) for high-resolution frequency hopping or phase-continuous sweeping for characterization applications....

LISTED UNDER: Test and Measurement, Signal Generators

Peak Power Meters

March 2, 2006 7:00 am | Wireless Design & Development | Product Releases | Comments

Anritsu Company introduces the ML2490A series peak power meters, featuring good bandwidth and rise time to conduct pulse measurements on rapid rise time radar signals and complex new modulation techniques used in 4G applications and wireless systems such as WiMAX. In addition to rising edge pulse measurements, both power meters in the series can conduct CW measurements....

LISTED UNDER: Test and Measurement, Power Meters | Test and Measurement, Power Meters

Digital Storage and Mixed-signal Oscilloscopes

February 2, 2006 9:20 am | Product Releases | Comments

Agilent Technologies Inc. introduces four digital storage and mixed-signal oscilloscopes that combine improved signal viewing of the industry's deepest memory with advanced waveform analysis. Powered by Agilent's patented next-generation MegaZoom technology, the 600 MHz and 1 GHz Infiniium models also combine deep memory and a high number of integrated channels with desirable waveform viewing capability....

LISTED UNDER: Test and Measurement, Oscilloscopes

Spectrum Analyzer Software Updated

December 30, 2005 7:17 am | Product Releases | Comments

Berkeley Varitronics Systems, Inc. announces its software version 2.0 for its BumbleBee™ handheld Wi-Fi spectrum analyzer. BumbleBee is a precision spectrum analyzer series that interface with HP's iPAQ® PocketPC®. The company has updated its BumbleBee Wi-Fi spectrum analyzer's iPAQ software to version 2....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading