Advertisement

Base Station Analyzer

October 26, 2004 11:37 am | Product Releases | Comments

Anritsu introduces Cell Master MT8212B which adds a CDMA/GSM transmitter analyzer, interference analyzer, built-in source, channel scanner, and DS0/VF channel access to the Cell Master design. With the Cell Master MT8212B, users can conduct all major RF measurements on CDMA signals. The integration of the CDMA transmitter analyzer option into the MT8212B also allows it to demodulate cdmaOne and cdma2000 1xRTT signals....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum
Advertisement

Multi-function Cable, Antenna and Base Station Analyzer

August 30, 2004 7:45 am | Product Releases | Comments

Anritsu Company introduces the Cell Master( MT8212B cable, antenna, and base station analyzer. Handheld and lightweight, Cell Master combines the functionality of a cable and antenna analyzer, spectrum analyzer, AM/FM/SSB demodulator, power meter, interference analyzer, and T1/E1 analyzer. Designed to conduct measurements in the 100 kHz to 3 GHz frequency range, the MT8212B allows field technicians to locate, identify, record, and solve com...

LISTED UNDER: Interconnect, Cables | Test and Measurement, Analyzers, Spectrum

Signal Strength Analyzer

August 30, 2004 7:45 am | Product Releases | Comments

Protek introduces a handheld RF signal strength analyzer, featuring 2.9 GHz bandwidth, – 117 dB/m maximum sensitivity and a scan rate of 125 channels/second. The model 3290 is suitable for narrowband, wideband, FM, AM, and single sideband signal measurements. The model allows up to 160 pre-set channels to be loaded into memory for rapid scans and displays by personnel doing RF analysis in the field....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Signal Generator

August 30, 2004 7:45 am | Product Releases | Comments

Aeroflex announces that it has increased the frequency coverage of its 3410 series digital RF signal generators to 6 GHz to address the need for testing 802.11a wireless local area network (WLAN) devices. The 6 GHz 3416 digital RF signal generator offers all the benefits of the 3410 series RF signal generators including multi-band adjacent channel power, analog and vector modulation, a dual channel arbitrary waveform generator option, and a...

LISTED UNDER: Test and Measurement, Signal Generators

Calibration Wizard

August 3, 2004 5:13 am | Product Releases | Comments

Boonton Electronics has a new web site that enables users to request any calibration, repair, or both 24 hours a day and instantly receive a Return Material Authorization, RMA, number online. The calibration wizard is accessed from the company's home page. Users can choose from a list of different products and the service to be performed, such as calibration of peak power meter....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Analyzer Options

April 29, 2004 10:06 am | Product Releases | Comments

Anritsu introduces a series of options for its MT8820A radio communications analyzer. The device now supports EDGE/EGPRS and 1xEV-DO, as well measures two phones simultaneously for an improvement in throughput. The analyzer already supports most wireless communications standards, including W-CDMA, CDMA2000 1X, PHS, and PDC....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

WLAN Power Meters

April 29, 2004 7:03 am | Product Releases | Comments

Anritsu introduces the ML2488A, a multi-standard power meter for WLAN and Bluetooth( power measurements. Addressing the important issues of power control, peak power, and timing in the design and implementation of wireless networks, Anritsu's ML2488A delivers accurate power measurements related to all Bluetooth and IEEE 802....

LISTED UNDER: Test and Measurement, Power Meters

Component Analyzer

March 15, 2004 9:53 am | Product Releases | Comments

Advantest introduces the R3860A RF component analyzer that features a four port receiver architecture at 20 GHz and a sweep speed of 5 ms/point. The R3860A's receiver-per-port design eliminates matrix switching of ports to receivers and has been developed to measure RF hybrid modules and multi-port devices used in multiband mobile handsets, WLAN devices, radars, and satellite equipment....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Network Analyzers

March 15, 2004 9:53 am | Product Releases | Comments

Advantest introduces the R3768/R3770 network analyzers that incorporate a four port receiver architecture developed to measure multi-port passive components designed into multiband mobile handsets, WLAN devices, radars, and satellite equipment. The R3768 has a measurement frequency range of 300 kHz to 8 GHz while the R3770 goes up to 20 GHz....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

COLFET Low-Noise Calibration Source

February 2, 2004 8:06 am | Product Releases | Comments

Spacek Labs Model CS-K Low-Noise COLFET Calibration Source offers a new way to calibrate K-band radiometers. Instead of a liquid nitrogen-cooled load, a small waveguide-output source (K-connector optional) radiates 33-60 K over 20-24 GHz when biased by +8 VDC, 100 mA max. The CS-K operates at room temperature so no cooling is required....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Arbitrary/Function Generator

January 21, 2004 10:48 am | Product Releases | Comments

The Dual-Channel Arbitrary/Function Generator R&S AM300 has been added to the Rohde & Schwarz Smart Instruments family. As an I/Q generator, it can be used to generate complex digitally modulated signals as required for mobile radio. As a function generator, it can be used to output all conceivable standard waveforms on two independent channels....

LISTED UNDER: Test and Measurement, Function Generators

Wi-Fi Analyzer

January 21, 2004 10:48 am | Product Releases | Comments

Firefly is a 802.11 Wi-Fi analyzer that maintains network throughput and security by recognizing and identifying abnormalities in 802.11, a, b and Bluetooth network traffic. Firefly's core application software creates relational databases of information about a wireless network of remotely configurable Fireflies with each Firefly containing up to 10 calibrated receiver modules....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Analyzer Cards

January 21, 2004 10:48 am | Product Releases | Comments

Acqiris introduces Model AP240 and AP235 dual-channel reconfigurable analyzer platforms with Sustained Sequential Recording (SSR) firmware capability. The SSR firmware enhances the analyzers' ability to acquire, store and transfer sequential waveforms to a host PC at sustained trigger rates. The firmware options uses FPGA technology and enables the AP240/235 platforms' Data Processing Unit (DPU) to store the digitized waveforms in a "pi...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Real-Time Spectrum Analyzers

January 21, 2004 10:48 am | Product Releases | Comments

Tektronix introduces a series of real-time spectrum analyzers that provide a complete measurement package for engineers developing RF technologies, ranging from RFID to radar applications. Real-time spectrum analysis provides the ability to trigger, capture, and analyze time-varying RF signals. The series includes the RSA2200A and RSA3300A....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Vector Signal Generators

November 24, 2003 7:19 am | Product Releases | Comments

The R&S SM300 is a vector signal generator that covers 9 kHz to 3 GHz. The instrument covers frequency bands including WLAN, Bluetooth and EMC measurements. The instrument is able to generate digital signals as are required for mobile radio. The signal generator provides frequency and level sweep, a wide variety of analog modulation modes and high spectral purity....

LISTED UNDER: Test and Measurement, Signal Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading