Advertisement

Wi-Fi Analyzer

January 21, 2004 10:48 am | Product Releases | Comments

Firefly is a 802.11 Wi-Fi analyzer that maintains network throughput and security by recognizing and identifying abnormalities in 802.11, a, b and Bluetooth network traffic. Firefly's core application software creates relational databases of information about a wireless network of remotely configurable Fireflies with each Firefly containing up to 10 calibrated receiver modules....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum
Advertisement

Analyzer Cards

January 21, 2004 10:48 am | Product Releases | Comments

Acqiris introduces Model AP240 and AP235 dual-channel reconfigurable analyzer platforms with Sustained Sequential Recording (SSR) firmware capability. The SSR firmware enhances the analyzers' ability to acquire, store and transfer sequential waveforms to a host PC at sustained trigger rates. The firmware options uses FPGA technology and enables the AP240/235 platforms' Data Processing Unit (DPU) to store the digitized waveforms in a "pi...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Real-Time Spectrum Analyzers

January 21, 2004 10:48 am | Product Releases | Comments

Tektronix introduces a series of real-time spectrum analyzers that provide a complete measurement package for engineers developing RF technologies, ranging from RFID to radar applications. Real-time spectrum analysis provides the ability to trigger, capture, and analyze time-varying RF signals. The series includes the RSA2200A and RSA3300A....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Vector Signal Generators

November 24, 2003 7:19 am | Product Releases | Comments

The R&S SM300 is a vector signal generator that covers 9 kHz to 3 GHz. The instrument covers frequency bands including WLAN, Bluetooth and EMC measurements. The instrument is able to generate digital signals as are required for mobile radio. The signal generator provides frequency and level sweep, a wide variety of analog modulation modes and high spectral purity....

LISTED UNDER: Test and Measurement, Signal Generators

Calibration Module

November 24, 2003 7:19 am | Product Releases | Comments

Anritsu introduces the MN4765A optical to electrical (O/E) calibration module that transforms its Lightning 37200C/37300C vector network analyzers (VNAs) into lightwave component analyzers. A characterized, unamplified photodiode module, the MN4765A acts as an optical receiver when used with the 37200C/37300C series VNAs, which have frequency coverage up to 65 GHz....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Signal Generators

October 28, 2003 10:16 am | Product Releases | Comments

Novatech introduces model 2910B/RACK, a four channel DDS signal generator in a 1U rack mount instrument case. The 2910B/RACK outputs four programmable frequencies that can be independently set to any value between 100 Hz and 300 MHz with a resolution of 1 μHz. Each frequency is provided on two buffered output connectors, for a total of eight outputs, which are factory configured as +13 dBm sinewaves, TTL clock signals or differential cl...

LISTED UNDER: Test and Measurement, Signal Generators

Network Analyzer

September 2, 2003 8:28 am | Product Releases | Comments

Agilent introduces frequency coverage capabilities up to 110 GHz for the PNA Series microwave vector network analyzers, as well as pulsed-RF and antenna measurement. The N5250A series provides frequency coverage from 10 MHz to 110 GHz. The series features two built-in sources, 32 measurement channels, 64 traces, and 16,0001 points per channel....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Signal Analyzers

July 30, 2003 9:51 am | Product Releases | Comments

The R3681 is a hybrid measuring solution that integrates the capabilities of a spectrum analyzer, modulation analyzer, vector signal generator and arbitrary waveform generator. With a specified average noise level of – 156 dBm/Hz and 26 dBm typical third-order intermodulation distortion, the R3681 has a dynamic range of 142 dBm....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Logic Analyzers

July 30, 2003 9:51 am | Product Releases | Comments

Tektronix' TLA5000 Series logic analyzers – TLA5201, TLA5202, TLA5203, TLA5204 – feature 50 ps (2 GHz)/32 Mb deep memory timing simultaneous with 125 ps MagniVu™ acquisition. The instruments include iView™ (Integrated View) capability to view, trigger on and characterize digital and analog characteristics of signals....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Protocol Analyzer

July 30, 2003 9:51 am | Product Releases | Comments

The HCI Tracer is an HCI analyzer system designed to capture, decode, and analyze Bluetooth HCI traffic. HCI Tracer allows users to probe RS232 connections, UARTs and/or BlueCore interfaces. The HCI Tracer software system runs on a portable or desktop PC and connects to Bluetooth Implementations Under Test via the HCI probe....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

USB Analyzer

July 8, 2003 11:09 am | Product Releases | Comments

Computer Access Technology Corporation (CATC) announces the USBMobile HS analyzer. The analyzer is in PC-card format and is able to detect, capture, decode, analyze, and display all USB speeds (1.5 Mbps, 12 Mbps and 480 Mbps). In addition to the new Hi-Speed capture feature, USBMobile HS provides support of the On-The-Go (OTG) specification and mass storage decodes....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Function Generator

July 8, 2003 11:09 am | Product Releases | Comments

Novatech announces the Model 2904A, a precision DDS function generator in a tabletop instrument case. The 2904A outputs Sine, Cosine and TTL signals simultaneously. The Sine and Cosine output amplitudes are programmable with 12-bits of resolution for up to 24 dBm (10 Vpp into 50 Ω) output power....

LISTED UNDER: Test and Measurement, Function Generators

Digital Storage Oscilloscopes

July 2, 2003 9:58 am | Product Releases | Comments

Nicolet Technologies introduces a 8 page, color brochure on the Sigma digital storage oscilloscope. The Sigma series integrates high accuracy signal acquisition, analysis capabilities and a Windows PC in a family of products. The brochure describes the various Sigma models, packaging and design, and specifications....

LISTED UNDER: Test and Measurement, Oscilloscopes

Noise Calibration Standards

July 2, 2003 9:47 am | Product Releases | Comments

Noise Com announces the NBS-Series of broadband Noise Calibration Standards for calibration laboratories, radiometer test and verification, and low noise amplifier tests. Using a low-loss waveguide horn design, Noise Com isolates the cold parts from the waveguide, which is controlled at ambient temperature, and avoids condensation of humidity and errors from temperature gradients....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

Noise Generator

June 2, 2003 6:41 am | Product Releases | Comments

Noise Com introduces the UFX-7126 Series Noise Generator, programmable noise generators for testing WLAN receivers. The UFX-7126 covers both the 2.5 GHz and the 5 GHz bands used by the 802.11 a and b standard WLAN, HyperLAN as well as the coming 802.11 g and h equipment. The UFX-7126 gene4rates white Gaussian noise from 2....

LISTED UNDER: Test and Measurement, Noise Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading