Advertisement

RF Analyzer Produces Fast Test Times

November 10, 2008 11:23 am | Product Releases | Comments

Agilent Technologies, Inc. introduces its FieldFox handheld RF analyzer, an integrated handheld instrument for wireless network installation and maintenance. Key measurements include cable and antenna test from 2 MHz to 4/6 GHz, spectrum analysis from 100 kHz to 4/6 GHz, vector network analysis and true average power measurements....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum

Signal Generator Exhibits Short Frequency- and Level-Setting Times

November 7, 2008 7:46 am | Product Releases | Comments

Rohde & Schwarz’s R&S SMC100A 1/2 × 19”, 2 HU signal generator shows frequency- and level-setting times of <5 ms from 9 kHz to 1.1 GHz or 3.2 GHz. The instrument integrates Integrating AM/FM/fM and pulse modulation. The unit displays a typical single-sideband phase noise of -111 dBc (f = 1 GHz) at 20 kHz offset in the 1-Hz measurement bandwidth, typical broadband noise of -148 dBc, typical output power of >17 dBm, and level accur...

LISTED UNDER: Test and Measurement, Signal Generators

Handheld Analyzers Offer Software Enhancements

September 29, 2008 8:48 am | Product Releases | Comments

Anritsu Company’s Site Master and Cell Master handheld analyzers now include firmware for sweep speed, optical Distance-to-Fault (DTF) measurement capability, post analysis tools and a phase-stable cable with reinforced handgrip. The firmware speeds up sweeps for cables and antennas by 30%. The ODTF-1 optical DTF module gives the analyzers the ability to be a portable fiber tester in remote radio head applications, shows fiber measurements ...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum
Advertisement

Power Sensors Cover Wide Power and Frequency Range

September 23, 2008 11:55 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies' U2000 Series USB-based power sensors operate in power range from -60 to 44 dBm and a frequency range from 9 kHz to 24 GHz. The devices deliver up to 1,000 readings/s in buffered mode, include a hi-speed USB 2.0 interface for plug=and-play setup without the use of power meters or external power adapters....

LISTED UNDER: Sensors & Transducers | Test and Measurement, Power Meters

Software Allows Signal Analyzers to Support Mobile Phone Systems

September 22, 2008 12:45 pm | Product Releases | Comments

Anritsu Company introduces its EDGE evolution test system. Two measurement software packages can be incorporated into the MS269xA series that allow the signal analyzers to support 2.5G GSM/EDGE and G EDGE Evolution (EGPRS2) mobile phone systems, providing a system for measuring the RF Tx characteristics of EDGE Evolution base stations, mobile terminals and devices and components....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Module Combines Digitizer and DDC

September 8, 2008 6:46 am | Wireless Design & Development | Product Releases | Comments

Pentek’s Model 7152 PMC module combines four 16-bit 200-MHz A/D digitizers with a 32-channel digital down converter (DDC) with pre-installed IP cores for Xilinx FPGAs. The device includes proprietary signal processing techniques, channel summation, and power meters with threshold detectors that automatically send an interrupt to the processor if the power level falls below or exceeds a programmable threshold....

LISTED UNDER: Test and Measurement, Power Meters

Keyboards Featured on Dual Output Function Generators

September 8, 2008 6:45 am | Product Releases | Comments

Protek Test and Measuremet offers its Model B8040FD DDS function generator. This high stability direct digital synthesis dual-output function generator has less than -54 dBc (Sine wave) harmonic distortion and a keyboard for rapid entry of waveform parameters. It delivers 40-ppm long-term and 1-ppm short-term stability; it generates waveforms including Sine, Square, Pulse, Triangle, exponential up and exponential down, Ramp, Sine (x) x and ...

LISTED UNDER: Boards & Modules | Test and Measurement, Function Generators

Power Measurement Kit Replaces Attenuators

September 8, 2008 6:45 am | Wireless Design & Development | Product Releases | Comments

MECA Electronics, Inc. introduces its MFK-PMK-1 Power Measurement Kit that replaces high power attenuators as a means of reducing RF signal levels into sensitive power meters. Directional couplers have low insertion loss and high directivity, so that the sampled power is stable and isolated from changes as power levels increase....

LISTED UNDER: Test and Measurement, Power Meters
Advertisement

Software Performs in Tester and Analyzer

September 5, 2008 5:47 am | Product Releases | Comments

Anritsu Company’s HSPA Evolution test software packages operate in the MD8480C signaling tester and MT8820B/MT8815B radio communications analyzers. The program verifies performance of their user equipment (UE) during development and manufacturing. The MX848001C-12 option for the MD8480C allows users to conduct packet connection tests using the Continuous Packet Connectivity (CPC) function in coupling tests and protocol sequence evaluation o...

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum

Analyzer Shows Live RF

August 25, 2008 7:57 am | Product Releases | Comments

Tektronix’s SA2600 real-time spectrum analyzer uses DPX waveform image processor technology to show a live RF view of a spectrum in analog and digital transmissions. The handheld device has a frequency coverage range from 10 kHz to 6.2 GHz, real time bandwidth of 20 MHz, and a displayed average noise level (DANL) of 153 dBm....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Oscilloscopes Operate from 1.5 to 6 GHz on Four Channels

August 25, 2008 7:57 am | Product Releases | Comments

LeCroy’s 700Zi Series WavePro digital oscilloscopes provide 1 MW ? and 50 W ? input capability in bandwidths from 1.5 to 6 GHz on four channels with ?4 V offset capability and ?3 V common mode control. The instruments have a sample rate of 20 and 40 GS/s interleaved as well as a record length of 10 Mpts/ch standards and up to 128 Mpts/ch optional....

LISTED UNDER: Test and Measurement, Oscilloscopes

Fast Switching RF & Microwave Synthesized Signal Generator

June 16, 2008 10:52 am | Product Releases | Comments

PNS? The 2520GTA series signal generator delivers extremely fast switching speeds, high output power, and low residual phase noise in a single unit. The 2520GTA series signal generator is offered in a frequency range of 100 MHz to 20 GHz with a frequency resolution of 0.001 Hz over the entire band. Loaded with standard performance features such as high time base stability and an optional feature of high leveled output power, the 2520GTA mak...

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generators Cover a Wide Range of Frequencies

May 8, 2008 11:57 am | Product Releases | Comments

Portable and Lightweight Low Levels of Adjacent Channel Power Peak Output Power of Up to +16 dBm The IFR 3410 series from Aeroflex, Inc. contains portable, lightweight signal generators that cover a wide range of carrier frequencies to 6 GHz. High quality analog and vector modulation capabilities make them suitable for research, development and manufacturing applications....

LISTED UNDER: Test and Measurement, Signal Generators

PXI Express RF Vector Signal Generator with 20 MHz Onboard Signal Processing

April 11, 2008 7:42 am | Product Releases | Comments

National Instruments releases its NI PXIe-5672 RF vector signal generator that delivers signal generation from 250 kHz to 2.7 GHz, 20 MHz of instantaneous bandwidth and real-time data streaming at up to 25 MS/s. It also features a PXI Express interface that makes it possible to stream data from hard disk or PC memory at the full output rate of the instrument....

LISTED UNDER: Test and Measurement, Signal Generators

Signal Generator Covers RF and Microwave Frequencies

April 11, 2008 7:42 am | Product Releases | Comments

Anritsu Company introduces its MG37020A fast-switching microwave signal generator that covers both RF and microwave frequencies from 10 MHz to 20 GHz. The device, with 100 μsec per point typical switching speed, is a suitable signal source for RF and microwave applications requiring frequency agility, including data intensive applications such as antenna testing and satellite payload testing....

LISTED UNDER: Test and Measurement, Signal Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading