Advertisement

Software Bundle Improves Efficiency in Signal Analyzers

January 14, 2009 9:43 am | Product Releases | Comments

Anritsu Company introduces a software bundle for its MS269xA signal analyzers to improve efficiency during development of mobile phones and cellular base stations, as well as in other R&D applications. These new functions include spectrogram, spurious emissions measurements, phase noise measurements and AM/FM measurements to provide critical information during the development process, and to allow rapid evaluation during the product test cy...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Vector Signal Analyzer, Spectrum Analyzer, and Digital Oscilloscope Combination Breaks New Ground

December 30, 2008 6:42 am | Product Releases | Comments

Tektronix, Inc. announces SignalVu™ vector signal analysis software for DPO7000 and DPO/DSA70000 digital oscilloscope series, enabling engineers to easily characterize and validate wideband and microwave spectral events. SignalVu combines the signal analysis engine of the RSA6100A real-time spectrum analyzer with the powerful triggering capabilities of one of the industry's widest bandwidth DPO7000 and DPO/DSA70000 digital oscilloscope...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Test and Measurement, Oscilloscopes

Digital Phosphor Oscilloscopes Eliminate Trade-Offs

December 18, 2008 7:11 am | Product Releases | Comments

Tektronix, Inc. introduces its DPO7000 digital phosphor oscilloscopes (DPOs) that are based upon a generation hardware platform that eliminates the trade-offs found in other oscilloscopes between sample rate, record length and waveform capture rate. Ranging from 500 MHz to 2.5 GHz, these oscilloscopes are suitable for debugging devices, reducing time to market, obtaining high quality products and lowering development costs....

LISTED UNDER: Test and Measurement, Oscilloscopes
Advertisement

Power Device Analyzer/Curve Tracer Features High-Voltage Capability

December 18, 2008 7:11 am | Product Releases | Comments

Agilent Technologies, Inc. introduces its power device analyzer/curve tracer that is able to characterize semiconductor devices at up to 3,000 V and 20 A in a single box solution. Featuring a curve tracer mode, the B1505A can replace curve tracers used in failure analysis, as well as in circuit design or power module development of electronic equipment makers....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Signal Analyzer Offers Increased Performance

December 18, 2008 7:11 am | Product Releases | Comments

Agilent Technologies, Inc. announces enhancements to its X-Series signal analyzers which deliver speed and scalability. The series includes the proprietary EXA and MXA signal analyzers and application-specific measurement solutions, including EDGE evolution and LTE MIMO. The upgraded EXA delivers 25 MHz analysis bandwidth....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Software Bundle Enhances Signal Analyzer Functionality

December 4, 2008 10:46 am | Product Releases | Comments

Anritsu Company’s software bundle for its MS269xA signal analyzers offer new functions to provide critical information during the development process in mobile phones, cellular base stations and R&D applications. The spectrogram function shows 3-D displays of changes in frequency and power in time for burst signals, transient interference signals and RF signals up to 125 MHz....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Analyzer Software Allows Multi-Method Analysis

November 21, 2008 10:08 am | Product Releases | Comments

Applied Analytics’ ECLIPSE Process 10 online analyzer software enables simultaneous Analysis and Calibration Methods (ACM) configuration. The program calibrates the instrument and determines the parameters of analysis via a set of data and variables. The product includes instantaneous user interface response, and diagnostics and reporting routines to continuously evaluate the performance of the system and trigger rapid action....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

RF Analyzer Produces Fast Test Times

November 10, 2008 11:23 am | Product Releases | Comments

Agilent Technologies, Inc. introduces its FieldFox handheld RF analyzer, an integrated handheld instrument for wireless network installation and maintenance. Key measurements include cable and antenna test from 2 MHz to 4/6 GHz, spectrum analysis from 100 kHz to 4/6 GHz, vector network analysis and true average power measurements....

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Analyzers, Spectrum
Advertisement

Peak Power Meters Provide High Sampling Rate

November 10, 2008 11:23 am | Wireless Design & Development | Product Releases | Comments

Anritsu Company introduces its ML2480B series of wideband peak power meters that combine wide 20 MHz bandwidth and 64 MS/s sampling rate, allowing the instruments to conduct highly accurate peak power measurements on next-generation wireless and military communications signals. These power meters provide best-in-class performance and ease of use which make them suitable for evaluating chipsets, modules, handsets, customer premise equipment ...

LISTED UNDER: Test and Measurement, Power Meters | Test and Measurement, Power Meters

Signal Generator Exhibits Short Frequency- and Level-Setting Times

November 7, 2008 7:46 am | Product Releases | Comments

Rohde & Schwarz’s R&S SMC100A 1/2 × 19”, 2 HU signal generator shows frequency- and level-setting times of <5 ms from 9 kHz to 1.1 GHz or 3.2 GHz. The instrument integrates Integrating AM/FM/fM and pulse modulation. The unit displays a typical single-sideband phase noise of -111 dBc (f = 1 GHz) at 20 kHz offset in the 1-Hz measurement bandwidth, typical broadband noise of -148 dBc, typical output power of >17 dBm, and level accur...

LISTED UNDER: Test and Measurement, Signal Generators

Handheld Analyzers Offer Software Enhancements

September 29, 2008 8:48 am | Product Releases | Comments

Anritsu Company’s Site Master and Cell Master handheld analyzers now include firmware for sweep speed, optical Distance-to-Fault (DTF) measurement capability, post analysis tools and a phase-stable cable with reinforced handgrip. The firmware speeds up sweeps for cables and antennas by 30%. The ODTF-1 optical DTF module gives the analyzers the ability to be a portable fiber tester in remote radio head applications, shows fiber measurements ...

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Power Sensors Cover Wide Power and Frequency Range

September 23, 2008 11:55 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies' U2000 Series USB-based power sensors operate in power range from -60 to 44 dBm and a frequency range from 9 kHz to 24 GHz. The devices deliver up to 1,000 readings/s in buffered mode, include a hi-speed USB 2.0 interface for plug=and-play setup without the use of power meters or external power adapters....

LISTED UNDER: Sensors & Transducers | Test and Measurement, Power Meters

Software Allows Signal Analyzers to Support Mobile Phone Systems

September 22, 2008 12:45 pm | Product Releases | Comments

Anritsu Company introduces its EDGE evolution test system. Two measurement software packages can be incorporated into the MS269xA series that allow the signal analyzers to support 2.5G GSM/EDGE and G EDGE Evolution (EGPRS2) mobile phone systems, providing a system for measuring the RF Tx characteristics of EDGE Evolution base stations, mobile terminals and devices and components....

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

Module Combines Digitizer and DDC

September 8, 2008 6:46 am | Wireless Design & Development | Product Releases | Comments

Pentek’s Model 7152 PMC module combines four 16-bit 200-MHz A/D digitizers with a 32-channel digital down converter (DDC) with pre-installed IP cores for Xilinx FPGAs. The device includes proprietary signal processing techniques, channel summation, and power meters with threshold detectors that automatically send an interrupt to the processor if the power level falls below or exceeds a programmable threshold....

LISTED UNDER: Test and Measurement, Power Meters

Keyboards Featured on Dual Output Function Generators

September 8, 2008 6:45 am | Product Releases | Comments

Protek Test and Measuremet offers its Model B8040FD DDS function generator. This high stability direct digital synthesis dual-output function generator has less than -54 dBc (Sine wave) harmonic distortion and a keyboard for rapid entry of waveform parameters. It delivers 40-ppm long-term and 1-ppm short-term stability; it generates waveforms including Sine, Square, Pulse, Triangle, exponential up and exponential down, Ramp, Sine (x) x and ...

LISTED UNDER: Boards & Modules | Test and Measurement, Function Generators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading