Advertisement

Tektronix MDO4000 Oscilloscope Review and Teardown

September 6, 2011 6:04 am | Product Releases | Comments

This video from Dave at the EEVBlog ( www.eevblog.com ) is the first review of the Tektronix's new Mixed Domain Oscilloscope, the MDO4000 series. Does it live up to the hype of changing the oscilloscope landscape and creating a new oscilloscope category? Also, in the review of the MSO4000 series Mixed Signal Oscilloscope.

LISTED UNDER: Test and Measurement, Oscilloscopes

R&S RTO High-performance Family Introduces the 600 MHz Oscilloscope

August 31, 2011 6:25 am | Product Releases | Comments

Fast detection of rare signal faults at an extremely high acquisition rate, excellent signal fidelity thanks to low-noise frontends, intuitive user interface for quick work: The R&S RTO for 1 GHz and 2 GHz bandwidth offers all this and much more. Rohde & Schwarz presents a new 600 MHz model in its high-performance oscilloscope family.

LISTED UNDER: Test and Measurement, Oscilloscopes

Oscilloscope Combines Scope and Spectrum Analyzer Functionality In a Single Instrument

August 30, 2011 7:02 am | Product Releases | Comments

Tektronix introduced what it asserts is the first mixed domain oscilloscope (MDO) that delivers the functionality of an oscilloscope and a spectrum analyzer in a single instrument. The MDO4000 Series gives engineers the ability to capture time-correlated analog, digital and RF signals for a complete system view to rapidly solve complicated design issues, saving days or even weeks of debug time.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Test and Measurement, Oscilloscopes
Advertisement

Very-High-Resolution Oscilloscope Includes Low-distortion Signal Generator

August 30, 2011 6:35 am | Product Releases | Comments

The new PicoScope 4262 from Pico Technology is a two-channel, 16-bit very-high-resolution oscilloscope (VHRO) with a built-in low-distortion signal generator. With its 5-MHz bandwidth, it can analyze audio, ultrasonic and vibration signals, characterize noise in switched mode power supplies, measure distortion, and perform a wide range of precision measurement tasks.

LISTED UNDER: Test and Measurement, Oscilloscopes | Test and Measurement, Signal Generators

Fast-Sweep RF Signal Generator From Saelig

August 4, 2011 5:26 am | Product Releases | Comments

Company has introduced theTGR6000 - a new, economically-priced 6GHz RF signal generator that is both simple and intuitive to use. The TGR6000 offers a high purity output with low phase noise over a frequency range of 10MHz to 6,000MHz, with output from -110dBm to +7dBm adjustable in 0.1dB steps. The frequency resolution is 10Hz and the internal time-base stability is better than 1ppm.

LISTED UNDER: Test and Measurement, Signal Generators

Anritsu Company Expands LTE Measurement Capabilities in Spectrum Master and BTS Master Handheld Analyzers

August 2, 2011 5:09 am | Product Releases | Comments

Anritsu Company announces it has enhanced the LTE measurement capabilities in its MS272xC Spectrum Master and MT822xB BTS Master series of handheld analyzers. With the new analysis tools added to the existing measurement capabilities, field engineers and technicians have handheld instruments that can conduct nearly all the measurements necessary to successfully deploy, commission, and maintain LTE networks.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum

New Mini Signal Generator Performs Up to 20 GHz

July 18, 2011 9:35 am | Product Releases | Comments

Vaunix Technology Corporation has introduced two new models to their Lab Brick® product line that together cover frequency ranges from 8 to 20 GHz. The LMS-203 operates from 10 to 20 GHz, while the LMS-163 operates from 8 to 16 GHz. Both boast low phase noise, fast 100 microsecond switching time, and fine 100 Hz frequency resolution.

LISTED UNDER: Test and Measurement, Signal Generators

Agilent Technologies Establishes Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 18, 2011 5:35 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope (AFM). The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration
Advertisement

Mini Signal Generator Performs up to 20 GHz

July 15, 2011 7:24 am | Product Releases | Comments

Vaunix Technology Corporation has introduced two new models to their Lab Brick® product line that together cover frequency ranges from 8 to 20 GHz. The LMS-203 operates from 10 to 20 GHz, while the LMS-163 operates from 8 to 16 GHz. Both boast low phase noise, fast 100 microsecond switching time, and fine 100 Hz frequency resolution.

LISTED UNDER: Test and Measurement, Signal Generators

Capacitance Calibration Standard for AFM-Based Scanning Microwave Microscopy

July 13, 2011 10:25 am | Product Releases | Comments

Agilent Technologies introduced the first commercially available capacitance calibration standard for an atomic force microscope. The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode.

LISTED UNDER: Services, Calibration / Test | Test and Measurement, Standards / Calibration

SM Series From Stackpole Offers High Power Handling Without Compromising Solder Joint Integrity

June 28, 2011 8:25 am | Wireless Design & Development | Product Releases | Comments

High power SMD ceramic based chip resistors are susceptible to solder joint failure, cracking, and pulling the solder lands off the PCB. This is due to the difference in the coefficient of thermal expansion between standard PCB materials, such as FR4 and ceramic. Stackpole’s SM Series surface mount molded wirewounds have compliant terminations that expand and contract with the PCB eliminating those concerns.

LISTED UNDER: Test and Measurement, Power Meters

Signal Generator Boasts Excellent Phase Noise

June 21, 2011 7:23 am | Product Releases | Comments

Hittite Microwave has launched the HMC-T2220, a new and easy to implement 10 MHz to 20 GHz Synthesized Signal Generator which provides the highest output power, lowest harmonic levels and broadest frequency range compared with any signal generator in its class for only $9,998.00. Ideal for use in automated test and measurement environments, research, and development laboratories; the HMC-T2220 is a compact and lightweight frequency generator that delivers up to +28 dBm of CW output power in 0.

LISTED UNDER: Test and Measurement, Signal Generators

Rohde & Schwarz Network Analyzers Use New Method to Measure Group Delay Over Long Distances

June 16, 2011 7:29 am | Wireless Design & Development | Product Releases | Comments

Rohde & Schwarz has developed a unique method that accurately measures group delay and phase linearity on satellite links. With the new R&S ZVA-K10 software option, users can perform measurements using two network analyzers located at separate sites. In open-area tests, for example, the analyzers can bridge long distances between a transmitter and a receiver.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Receivers, Other

Agilent Technologies Introduces Highest Performance Microwave PNA Network Analyzers

June 16, 2011 7:09 am | Wireless Design & Development | Product Releases | Comments

Agilent Technologies introduced five new PNA microwave vector network analyzer models, up to 67 GHz. The new PNA Series is based on Agilent’s PNA-X architecture and is the world’s highest performing microwave network analyzer, setting a new price/performance standard in the industry. The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters.

LISTED UNDER: Test and Measurement, Analyzers, Spectrum | Receivers, Other

Aeroflex Adds Avionics Waveforms to S-Series Signal Generators

June 15, 2011 12:56 pm | Wireless Design & Development | Product Releases | Comments

Following in the footsteps of the Aeroflex industry-standard 2030 Series avionics signal generator, Aeroflex Limited, announced the addition of popular avionics waveforms to its S-Series signal generator family. All avionics authorities (civil or military), airfields, airframe manufacturers, aircraft systems manufacturers, and military sub-contractors use avionics-specific signal generators to test important navigation functions.

LISTED UNDER: Test and Measurement, Signal Generators | Receivers, Other

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading