Multichannel D/A Converter Drives Productivity in Process Control I/O Systems in Industrial Applications

July 19, 2010 11:01 am | Product Releases | Comments

Analog Devices, Inc. today introduced a multichannel DAC (digital-to-analog converter) with innovative dynamic power control circuitry including ADI's leading dc-to-dc switching converters and diagnostic features. This new DAC can enable increased system productivity, while simultaneously lowering power use without affecting safety and reliability....

LISTED UNDER: Industrial | Digital Hardware, D / A Converters

Optical Modulator Drivers Suited for 10 GbE Transmitters

April 8, 2010 1:18 pm | Product Releases | Comments

Two new SMT packaged optical modulator drivers are now available from Hittite Microwave. These drivers operate from DC to 20 GHz, and are designed to drive Lithium Niobate Mach-Zehnder (MZ) and Electro-Absorptive (EA) optical modulators with up to 8 Vp-p signals, while exhibiting low additive RMS jitter.

LISTED UNDER: Modulators

A/D Converter Provides Twice the Sample Rate for Wireless Communications

December 14, 2009 11:48 am | Product Releases | Comments

Texas Instruments' new analog-to-digital-converter (ADC) combines 12 bits of resolution with a 1-GSPS sampling rate, effectively doubling the amount of signal bandwidth that can be captured in a single ADC. The ADS5400 offers an unmatched signal-to-noise ratio (SNR) of 59 dBFS and 75 dBc spurious-free dynamic range (SFDR) in first Nyquist, and 58 dBFS SNR and 70 dBc SFDR performance for intermediate frequencies (IFs) beyond 1000 MHz.

LISTED UNDER: Digital Hardware, A / D Converters

12-bit Quad D/A Converter with Non-Volatile EEPROM

October 8, 2009 12:10 pm | Product Releases | Comments

Microchip Technology's MCP4728 Digital-to-Analog Converter (DAC) is a 12-bit Quad DAC featuring a non-volatile EEPROM, which enables the DAC's configuration to be loaded automatically on start up. With this capability, plus its four-channel architecture and internal voltage reference, the MCP4728 DAC reduces design size and cost for a variety of battery-powered and power-constrained applications.

LISTED UNDER: Digital Hardware, D / A Converters

Optimizing the Embedded Software Design Process

August 12, 2009 1:02 pm | Wireless Design & Development | Product Releases | Comments

Many tools and techniques are available to help reduce time and cost during the product development cycle and can be applied regardless of the software methodology used. Joe Fabbre, Green Hills Software There are many different software design methodologies out there: Waterfall, V-Model, Agile, Extreme Programming — the list goes on and on....

LISTED UNDER: Software, Design | Digital Hardware, Other

Quad Sampling A/D Converter for Image Processing

August 3, 2009 9:13 am | Product Releases | Comments

Murata Power Solutions has introduced a new quad sampling Analog to Digital (A/D) converter for image processing applications where low noise performance and the ability to convert full-scale step input signals at a 10 MHz conversion rate is required. The ADSQ­1410 is a functionally complete, quad 14-Bit resolution, 10 mega samples per second (MSPS) converter.

LISTED UNDER: Digital Hardware, A / D Converters

Modulator Driver Targets 40-Gb/s Lightwave Systems

January 21, 2009 10:16 am | Product Releases | Comments

Narda Microwave-East’s FO-MDA-40-25G-1 lithium niobate modulator driver serves 300-pin MSA transponders employed in DPSK long-reach 40-Gb/s lightwave communication systems. The 1.10” × 1.10” × 0.34” device produces an eye pattern with electronic eye-crossing control from 40 to 70%. The unit demonstrates a 3-dB bandwidth from 85 kHz to 40 GHz, gain of 29 dB, input and output return loss of 12 dB, rms additive jitter of 550 ps, rise...

LISTED UNDER: Modulators

RF Quadrature Modulator Offers 100-MHz to 1-GHz Operation

January 14, 2009 9:43 am | Product Releases | Comments

CML Microcircuits unveils its CMX993 highly integrated, general purpose, RF quadrature modulator that offers 100-MHz to 1-GHz operation and optimal wide-band noise performance. Additional features include gain control and uncommitted differential amplifiers. Targeted to meet the requirements of wireless data (digital TV, CATV modulators, ISM transmitters, Wireless LAN, WLL) and two-way radio systems (APCO P25), the device's I/Q architecture...

LISTED UNDER: Modulators

Σ Δ A/D Converters Fill the Gap

December 30, 2008 6:41 am | Product Releases | Comments

A low noise, wide bandwidth family of continuous-time sigma-delta (CTSD) analog-to-digital converters (ADCs) is available from Analog Devices. The 16-bit, AD9261 and AD9262 CTSD converter, and the AD9267 CTSD modulator couple low noise and high dynamic range with a bandwidth of up to 10 MHz. The AD9267 is exportable to China....

LISTED UNDER: Digital Hardware, A / D Converters

Broadband Quadrature Modulator Integrates Automatic Gain Control

December 18, 2008 7:11 am | Product Releases | Comments

Analog Devices, Inc. introduces its high-performance broadband I/Q quadrature modulator to integrate automatic gain control (AGC) circuitry within a compact 6 × 6 mm LFCSP (lead-frame chip-scale package). The ADL5386 provides a combination of performance and integration levels for low IF and RF transmitters within broadband wireless access systems, microwave radio links, cable modem termination systems and cellular infrastructure equi...

LISTED UNDER: Modulators

High-speed Pulse Width Modulator

January 14, 2008 4:30 am | Product Releases | Comments

Microchip Technology Inc. announces the MCP1631 2.0 MHz, high-speed pulse width modulator. The highly integrated device contains a 1 Ampere (A) integrated MOSFET driver, high-speed comparator for over-voltage protection and both battery-current and voltage-sense amplifiers in one small package....

LISTED UNDER: Modulators

A/D Converters for Demanding Low Power Requirements

December 12, 2007 9:16 am | Product Releases | Comments

austriamicrosystems has added the AS1528 10-bit, low power, single-channel, fully-differential A/D converter and the AS1529 dual-channel, single-ended, low power A/D converter to its micro-power A/D converter family. Combining low power operation at a high sampling speed of 150 ks/s, with good dynamic performance in a small 3 × 3 mm TDFN 8-pin package, the AS1528/29 family is an optimal solution for small battery-powered devices and por...

LISTED UNDER: Digital Hardware, A / D Converters

Broad Band Variable Attenuator/Modulator

November 15, 2007 7:48 am | Product Releases | Comments

American Microwave Corporation offers model AGT-2018-60D-100 Option RW, a broad band variable attenuator/modulator with 60 dB dynamic range. --> American Microwave Corporation offers model AGT-2018-60D-100 Option RW, a broad band variable attenuator/modulator with 60 dB dynamic range, designed to operate over the full 0....

LISTED UNDER: Modulators

12-Bit A/D Converter

November 15, 2007 7:48 am | Product Releases | Comments

e2v announces its model AT84AS001TP 12-bit A/D converter that can provide 500 Msps data conversion from a single monolithic chip, allowing system designers to digitize intermediate frequency (IF) signals with frequencies up to 500 MHz at twice the sampling rate of conventional 12-bit ADCs. The converter is suitable for applications that include telecommunication infrastructure, high IF broadband digital receivers, test and measurement equip...

LISTED UNDER: Digital Hardware, A / D Converters

High-dynamic Range Direct Demodulators

July 17, 2007 11:09 am | Product Releases | Comments

The Skyworks Solutions’ SKY73012 is an integrated, broadband, high-dynamic range quadrature demodulator with outputs that are differential and can be directly connected to most commonly available analog to digital (A/D) converters. It is also an appropriate solution for CDMA, UMTS, GSM/GPRS receivers, WiMAX (IEEE 802....

LISTED UNDER: Demodulators | Modulators


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.