Battery System
February 25, 2003 12:07 pm | Product Releases | CommentsThe PowerSafe DDm battery system provides long service life and excellent performance for a variety of applications that require large capacity valve-regulated batteries. The cell design of the DDm incorporates thick 0.25 inches positive plates for a long battery life of up to 20 years. The battery cells have welded epoxy, dual post seals that are 100% water bath tested in the factory....
LISTED UNDER: Power, Batteries | Power, BatteryLinear Battery Charger
December 26, 2002 8:56 am | Product Releases | CommentsThe ISL6291 is a highly integrated linear battery charger for single cell Li Ion/Li Polymer powered handheld applications. ISL6291 provides a single output voltage of either 4.2 V or 4.1 V, 1% accuracy, required for safely charging Li based cells. The part is available in a 16-pin 5 × 5 mm QFN package....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Connector
November 1, 2002 6:09 am | Product Releases | CommentsThe Euro Battery Connector family (EBC), features technical innovations for ease of use and assembly for 80, 160, and 320 amp applications. Its design is intermatable with all existing DIN 43589-1 auxiliary contact systems currently installed. The EBC allows the voltage-key to remain in place when acid/air circulation is used....
LISTED UNDER: Power, Batteries | Power, BatteryFront Terminal Battery
November 1, 2002 6:08 am | Product Releases | CommentsThe Powersafe VX100F series has a design life of 10 years at 40°C. The series includes positive plates made of pure lead for enhanced corrosion resistance, a polycarbonate/ABS blend used for the battery's case and cover to provide added mechanical strength and thermal stability, and a high quality compression grommet post seal....
LISTED UNDER: Power, Batteries | Power, BatteryLithium Battery Protection Module
September 11, 2002 5:17 am | Product Releases | CommentsThe Panther Lithium-Battery Protection Module is for use in Li-ion and Li-polymer single-cell applications. The miniature module improves the operating life of one-cell rechargeable battery packs. It provides complete lithium-battery protection with no external components. The Panther module is sized to connect to most Li-polymer cells without extra connecting boards or flex....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Packs
September 11, 2002 5:17 am | Product Releases | CommentsThese custom battery packs feature special brackets or stand-offs to save space inside product packages or can incorporate snap-on plastic cases to create space outside, while maintaining a clean, streamlined appearance. Primary chemistries such as alkaline, nickel-cadmium, nickel-metal-hydride, lithium ion, and LMNO 2 are available....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Servicing Tool
June 4, 2002 9:36 am | Product Releases | CommentsDataFX is a versatile instrument for aircraft battery and cell monitoring. Features include a design with a large display screen for viewing up to 22 cell voltages simultaneously, print capabilities that eliminate the need for manual recording, and self-calibration. DataFX quickly and accurately scans the battery's cells during charge and discharge, measuring cell voltages at varying intervals, and displaying the results on the front panel ...
LISTED UNDER: Power, Batteries | Power, BatteryBattery Protection ICs
May 6, 2002 7:16 am | Product Releases | CommentsSeiko Instruments introduced a 3-serial and 4-serial cell LI-ION Battery Protection ICs (BPIC) with three levels of over-current detection. The S-8243A/B Series incorporates high-accuracy battery protection circuits, a battery monitor amp and a voltage regulator, therefore decreasing external component count and reducing board space by 50%....
LISTED UNDER: Power, Batteries | Power, BatteryLithium Ion Battery Charge Controller
January 29, 2002 3:56 am | Product Releases | CommentsON Semiconductor has introduced a single-cell lithium-ion (Li) battery charge controller that boasts a stand-by current of 0.5 microamps (?A). Designed for use in a wide variety of portable electronic devices, the NCP1800 delivers a smaller footprint, reduced part count and extended battery life required by today's highly competitive wireless and portable handheld product manufacturers....
LISTED UNDER: Power, Batteries | Power, BatteryResettable Protection for Li-Ion and Li-Polymer Battery Packs
January 29, 2002 3:56 am | Product Releases | CommentsTyco Electronics Corporation announced a new addition to its line of PolySwitch® PPTC (polymeric positive temperature coefficient) resettbale strap devices, from its Raychem Circuit Protection Division. Providing both overcurrent and overtemperature protection, the VLP270 device is designed to accommodate the increasing demands for longer run time of cellular phones, notebook computers, PDAs, and other portable electronics....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Adapter Compatible With Lithium Ion
November 29, 2001 8:38 am | Product Releases | CommentsiTECH announces the release of a lithium ion battery adapter compatible with Motorola Saber MX1000, MX2000 and MX3000 radios (battery part number NTN8818A). This adapter design uses the radio bayonet-type interface and eliminates the need for multiple adapters to support multiple capacities. iTECH battery adapter part number BA6501 is compatible with the iTECH iQ five ® battery analyzer/conditioner with software version 9....
LISTED UNDER: Interconnect, Adapters | Power, Batteries | Power, BatteryLithium-Ion-Battery Charging Techniques for Mobile Phones and PDAs
October 30, 2001 10:24 am | Product Releases | CommentsDeciding whether to use a switch-mode, linear, or pulse charger depends on a number of considerations. By Matt Schindler, Maxim Integrated Products Charging Lithium Ion batteries in mobile phones and PDAs is a balancing act. On one hand, high current is needed to quickly replace the energy drained from the battery while transmitting voice or data....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Service System
October 30, 2001 8:03 am | Product Releases | CommentsCell-Con announced the offering of its new Ultra Battery Service System. This product can quickly charge any NiCd or NiMH 3 to 12 cell assembly. In addition, the charging system will condition the batteries and capacity test them. This one system allows users to be sure that they maximize cycle life and they can know when the cells are coming to the end of life....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Maintenance Systems
October 8, 2001 4:27 am | Product Releases | CommentsChristie Electric Co., a division of Marathon Power Technologies Company, announces a special trade-in program for current RF80-H, RF80-GT, Superceder, or PCA 131 users. With a trade in, qualifying customers can either receive $500 towards the purchase of a new RF80-K or U-60, or they can request that Marathon donate their old unit to a trade school....
LISTED UNDER: Power, Batteries | Power, BatteryBattery Conductance Tester
September 28, 2001 10:41 am | Product Releases | CommentsThe Micro Celltron can test lead-acid or monobloc batteries up to 12 V in common configurations up to 2000 Ah. It indicates potential failures and helps prioritize replacements for cost-effective system management. The Micro Celltron can test both cell and intercell strap integrity and stores 252 test and overall string statistics....
LISTED UNDER: Power, Batteries | Power, Battery | Services, Calibration / Test
