Li-Ion Battery Charger

May 30, 2003 11:38 am | Product Releases | Comments

The LTC4056 is a linear Li-Ion battery charger controller in a ThinSOT™ package. The total solution occupies an area of less than 75 mm 2 and has a height of 1 mm. The LTC4056 targets systems that need to charge a 4.2 Li-Ion battery from a 4.5 V to 6.5 V input source with charge currents ranging from 200 mA to 700 mA....

LISTED UNDER: Power, Batteries | Power, Battery

Power Management Device

April 29, 2003 7:27 am | Product Releases | Comments

The XC6403 includes a LDO voltage regulator and voltage detector in one single-chip package. With a power consumption of 30 μA (less than 0.01 μA in standby), the XC6403 is ideal for Bluetooth and WLAN. The series provides regulated low-noise outputs, and can be configured to monitor various parts of the circuit including the input, battery level check; and the output, similar to a power 'OK' function....

LISTED UNDER: Power, Management

Battery Contacts

March 28, 2003 9:42 am | Product Releases | Comments

These leaf-type battery contacts for snap-in mounting of AA batteries are high reliability devices feature spring tension, which provides low contact resistance while adjusting to any variations in battery length. Availability is in either leaf spring (negative, Part #590) or button (positive, Part #596)....

LISTED UNDER: Power, Batteries | Power, Battery

Battery Contact

March 28, 2003 3:51 am | Product Releases | Comments

Developed for portable electronic devices, the BC-501-1 SMT batter contact produces high-reliability spring contact due to its design. The free standing BC-501-1 contacts can be randomly placed on a circuit board. The BC-501-1 is manufactured from phosphor bronze flat wire with gold plating, 10 micro inches thick over nickel....

LISTED UNDER: Power, Batteries | Power, Battery

Battery System

February 25, 2003 12:07 pm | Product Releases | Comments

The PowerSafe DDm battery system provides long service life and excellent performance for a variety of applications that require large capacity valve-regulated batteries. The cell design of the DDm incorporates thick 0.25 inches positive plates for a long battery life of up to 20 years. The battery cells have welded epoxy, dual post seals that are 100% water bath tested in the factory....

LISTED UNDER: Power, Batteries | Power, Battery

DC/DC Power Converters

February 25, 2003 12:07 pm | Product Releases | Comments

The Q Model of the UHE Series has input voltage ranges from 9 to 36 volts (Q12 model) and 18 to 75 volts (Q48 model). Output voltages/currents are: 3.3 Vout at 7.5 Amps; 5 Vout at 5 Amps; 12 Vout at 2.5 Amps; and 15 Vout at 2 Amps. Efficiencies as high as 90%. The models are come in rugged, fully-encapsulated, plastic packages....

LISTED UNDER: Power, Converters


January 27, 2003 9:34 am | Product Releases | Comments

The LTC4214 is a negative Hot Swap™ controller in a MSOP package. The device allows a board with a low voltage negative supply to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting, and a fast feed forward path that limits peak current under worst-case catastrophic fault....

LISTED UNDER: Power, Controllers

Linear Battery Charger

December 26, 2002 8:56 am | Product Releases | Comments

The ISL6291 is a highly integrated linear battery charger for single cell Li Ion/Li Polymer powered handheld applications. ISL6291 provides a single output voltage of either 4.2 V or 4.1 V, 1% accuracy, required for safely charging Li based cells. The part is available in a 16-pin 5 × 5 mm QFN package....

LISTED UNDER: Power, Batteries | Power, Battery

Process for Power Management Applications

December 2, 2002 6:08 am | Product Releases | Comments

PolarFab offers a 1.25-micron, 30 V junction-isolated modular bipolar process for 6 inches wafers. The BP30 process is ideal for power management applications up to 30 V including amplifiers, line drivers, and other linear applications. The PB30 process employs a lateral isolation technique that provides tight packing density without increasing process complexity....

LISTED UNDER: Power, Management

Battery Connector

November 1, 2002 6:09 am | Product Releases | Comments

The Euro Battery Connector family (EBC), features technical innovations for ease of use and assembly for 80, 160, and 320 amp applications. Its design is intermatable with all existing DIN 43589-1 auxiliary contact systems currently installed. The EBC allows the voltage-key to remain in place when acid/air circulation is used....

LISTED UNDER: Power, Batteries | Power, Battery

Front Terminal Battery

November 1, 2002 6:08 am | Product Releases | Comments

The Powersafe VX100F series has a design life of 10 years at 40°C. The series includes positive plates made of pure lead for enhanced corrosion resistance, a polycarbonate/ABS blend used for the battery's case and cover to provide added mechanical strength and thermal stability, and a high quality compression grommet post seal....

LISTED UNDER: Power, Batteries | Power, Battery

Lithium Battery Protection Module

September 11, 2002 5:17 am | Product Releases | Comments

The Panther Lithium-Battery Protection Module is for use in Li-ion and Li-polymer single-cell applications. The miniature module improves the operating life of one-cell rechargeable battery packs. It provides complete lithium-battery protection with no external components. The Panther module is sized to connect to most Li-polymer cells without extra connecting boards or flex....

LISTED UNDER: Power, Batteries | Power, Battery

Battery Packs

September 11, 2002 5:17 am | Product Releases | Comments

These custom battery packs feature special brackets or stand-offs to save space inside product packages or can incorporate snap-on plastic cases to create space outside, while maintaining a clean, streamlined appearance. Primary chemistries such as alkaline, nickel-cadmium, nickel-metal-hydride, lithium ion, and LMNO 2 are available....

LISTED UNDER: Power, Batteries | Power, Battery

Interface for DC Power Supplies

July 10, 2002 7:12 am | Product Releases | Comments

Sorensen, a division of Elgar, introduces a free graphical user interface (GUI) for its DLM and DCS families of programmable DC power supplies. The Windows executable program allows users of the DLM and DCS power supplies to control the power supply's programming, monitoring, and operation from a PC through an IEEE or RS 232 interface without needing SCPI commands....

LISTED UNDER: Power, Supplies

AC/DC Power Supplies

June 4, 2002 9:36 am | Product Releases | Comments

Model DMS-PS-CM Series of AC/DC instrumentation power supplies are ideal for driving modern transducers, digital panel meters, operational amplifiers, and data acquisition components. The series accepts universal AC inputs (85 - 264 V AC @ 47 - 63 Hz) and deliver +5 V DC, +12 V DC and/or +24 V DC outputs from single, dual or triple-output configurations....

LISTED UNDER: Power, Supplies


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.