Passives, Inductors
Gowanda’s Small Non-Magnetic Inductor
May 8, 2013 10:32 am | by WDD Staff | Product Releases | CommentsGowanda Electronics has introduced the non-magnetic molded RF inductor series, SMG1812. The dimensions of the new SMG1812 are 4.8 (L) x 3.4 (W) x 3.5 mm (H). The overall size is more than 40% smaller than Gowanda’s SMG3013 series (the industry’s smallest non-magnetic molded RF inductor series until now).
LISTED UNDER: Passives, Inductors
Low-Profile Power Inductors
April 19, 2013 8:53 am | by WDD Staff | Product Releases | CommentsMurata Power Solutions has announced the 3000A and 3000B series of low-profile power inductors for use in noise reduction circuits of high-frequency and high-current switching power supplies, DC-DC converters, and voltage regulator modules.
LISTED UNDER: Passives, InductorsMultilayer Chip Inductors Intended for High Frequency Applications
September 7, 2012 5:44 am | Product Releases | CommentsAVX Corporation has added a new series of multilayer chip inductors designed for impedance matching, RF chokes, and high frequency filters to its expansive portfolio of thin film, MLO, power, and conical inductors. Designated the LCMC Series, the new multilayer chip inductors provide excellent Q, high SRF, a wide range of stable and accurate inductances, and tight tolerances down to 0.
LISTED UNDER: Passives, InductorsLmax Series Inductors for Consumer and Industrial Power Applications
June 11, 2012 6:24 am | Product Releases | CommentsAVX Corporation has expanded its line of thin film, multi-layer organic (MLO), and broadband wire-wound conical inductors to include a new series of shielded and non-shielded SMD power inductors. Designated the Lmax series, these inductors feature a wide inductance range, low DC resistance, and the high current values necessary for industrial applications.
LISTED UNDER: Consumer | Industrial | Passives, InductorsNew Line Of SMD Power Inductors
March 23, 2012 10:07 am | Product Releases | CommentsSignal Transformer (a subsidiary of Bel Fuse Inc.), a leading manufacturer of standard and custom power transformers and high frequency magnetics, and Digi-Key Corporation, known by design engineers to have the industry's largest selection of electronic components available for immediate shipment, today announced that the two companies have entered into an agreement under which Digi-Key will distribute Signal's 150+ new series of SMD wire wound inductors to customers worldwide.
LISTED UNDER: Passives, InductorsOver 150 New Series of SMD Power Inductors
February 1, 2012 10:43 am | Product Releases | CommentsSignal Transformer announced the addition of over 150 series of SMD wire wound inductors to complement their offerings of standard and custom power transformers and high frequency magnetics. The new RoHS- compliant and PB-free series provide OEMs/ODMs with cost-effective solutions to an array of space-constrained applications requiring a wide range of inductance and high current.
LISTED UNDER: Passives, InductorsRF Chip Inductors Address MIL-PRF-83446
January 10, 2012 5:56 am | Product Releases | CommentsGowanda Electronics announced that the company recently achieved qualification to the military’s MIL-PRF-83446 (/36A and /37A) for its ML0603 and ML0805 series of RF surface mount wirewound ceramic core chip inductors. These are said to be the first series in the industry to address the market need for Qualified Product List (QPL) inductors which meet this particular Department of Defense specification.
LISTED UNDER: Passives, InductorsHigher Rating Achieved on RF Inductors for Military Market
November 4, 2011 9:31 am | by Posted Janine E. Mooney, Editor November 4, 2011 | Product Releases | CommentsGowanda Electronics announced that the company recently achieved failure rate Level P for its MIL-PRF-39010 RF Inductors – ER10M Series and ER17S Series. These thru-hole series meet the military’s Qualified Product List (QPL) requirements for Established Reliability (ER). Such approval requires extensive life testing of electrical, environmental, mechanical and thermal performance.
LISTED UNDER: Military-Aerospace | Passives, InductorsPower Inductors Tout Low Height and DCR Values
November 4, 2011 4:28 am | Product Releases | CommentsTotal Frequency Control has released a family of high-current smt power inductors (type UPI A 1004) presented as having the lowest height and minimum DCR values in this package footprint (11.8 x 10.5 mm). The 4.2mm-high shielded devices can handle high transient spikes without saturation.
LISTED UNDER: Passives, InductorsSurface Mount Power Inductors Offer Lowest DC Resistance
October 20, 2011 7:12 am | Product Releases | CommentsMurata Power Solutions today announced the 6000A and 6000B series of surface mount power inductors. Designed for energy storage, input or output filtering and DC/DC converter applications, these compact inductors offer what is believed to be the lowest DC resistance values currently available. Both series can accommodate high current throughput and offer a wide range of inductance values.
LISTED UNDER: Passives, InductorsTaiyo Yuden Power Inductors: Leading DC Bias Characteristics
June 21, 2011 8:16 am | Product Releases | CommentsTaiyo Yuden has announced details of the commercial release of three new 4mm square wire-wound power inductors, the NRS4010 (4.0x4.0x1.0mm), the NRS4012 (4.0x4.0x1.2mm) and the NRS4018 (4.0x.4.0x1.8mm), each representing a maximum thickness. At an inductance value of 2.2µH, the NRS4018T2R2M achieves a saturation current of 3.
LISTED UNDER: Passives, InductorsNew Flat Wire Inductors Excel At High Temperatures
June 17, 2011 9:51 am | Product Releases | CommentsFeaturing a “flat wire” design that is coiled and mounted directly to the circuit board to allow efficient heat dissipation, the new DR79892 and DR79893 Flat Wire Inductors from Datatronic Distribution, are designed for performance in power supplies, industrial controls and instrumentation applications.
LISTED UNDER: Passives, InductorsRichardson RFPD Selected as Sole Distributor for ATC Ultra-Broadband 506WLC Series Inductors
June 15, 2011 6:06 am | Product Releases | CommentsRichardson RFPD announced it has been selected by American Technical Ceramics (ATC) as the global exclusive distributor for the new 506WLC Series of Ultra-Broadband Inductors. This select group of inductors has been engineered with a powdered iron ferrite core and gold plated terminations to provide reliable and repeatable ultra-broadband performance beyond 40 GHz.
LISTED UNDER: Passives, InductorsSMT Flat Coil Inductors Aimed at High-Current Applications
June 7, 2011 2:27 pm | Product Releases | CommentsMurata Power Solutions today announced three new series of surface mount inductors aimed at high current applications where low loss characteristics are essential. The 3700, 3800 and 3900 series are flat coil inductors that provide a wide range of inductance values from 0.15 to 10uH with DC current ratings up to 19.
LISTED UNDER: Passives, InductorsGowanda to Introduce Ultra-Broadband Conical Inductors at MTT-S IMS2011
May 18, 2011 5:55 am | Product Releases | CommentsGowanda Electronics, a designer and manufacturer of precision electronic components for RF and power applications, is launching its inaugural line of Ultra-Broadband Conical Inductors at the MTT-S International Microwave Symposium (IMS2011) Exhibition in Baltimore, Maryland on June 7-9, 2011 (Booth 730).
LISTED UNDER: Passives, Inductors
