Advertisement

Over 150 New Series of SMD Power Inductors

February 1, 2012 10:43 am | Product Releases | Comments

Signal Transformer announced the addition of over 150 series of SMD wire wound inductors to complement their offerings of standard and custom power transformers and high frequency magnetics. The new RoHS- compliant and PB-free series provide OEMs/ODMs with cost-effective solutions to an array of space-constrained applications requiring a wide range of inductance and high current.

LISTED UNDER: Passives, Inductors
Advertisement

RF Chip Inductors Address MIL-PRF-83446

January 10, 2012 5:56 am | Product Releases | Comments

Gowanda Electronics announced that the company recently achieved qualification to the military’s MIL-PRF-83446 (/36A and /37A) for its ML0603 and ML0805 series of RF surface mount wirewound ceramic core chip inductors. These are said to be the first series in the industry to address the market need for Qualified Product List (QPL) inductors which meet this particular Department of Defense specification.

LISTED UNDER: Passives, Inductors

Higher Rating Achieved on RF Inductors for Military Market

November 4, 2011 9:31 am | by Posted Janine E. Mooney, Editor November 4, 2011 | Product Releases | Comments

Gowanda Electronics announced that the company recently achieved failure rate Level P for its MIL-PRF-39010 RF Inductors – ER10M Series and ER17S Series. These thru-hole series meet the military’s Qualified Product List (QPL) requirements for Established Reliability (ER). Such approval requires extensive life testing of electrical, environmental, mechanical and thermal performance.

LISTED UNDER: Military-Aerospace | Passives, Inductors

Power Inductors Tout Low Height and DCR Values

November 4, 2011 4:28 am | Product Releases | Comments

Total Frequency Control has released a family of high-current smt power inductors (type UPI A 1004) presented as having the lowest height and minimum DCR values in this package footprint (11.8 x 10.5 mm). The 4.2mm-high shielded devices can handle high transient spikes without saturation.

LISTED UNDER: Passives, Inductors

Surface Mount Power Inductors Offer Lowest DC Resistance

October 20, 2011 7:12 am | Product Releases | Comments

Murata Power Solutions today announced the 6000A and 6000B series of surface mount power inductors. Designed for energy storage, input or output filtering and DC/DC converter applications, these compact inductors offer what is believed to be the lowest DC resistance values currently available. Both series can accommodate high current throughput and offer a wide range of inductance values.

LISTED UNDER: Passives, Inductors

Taiyo Yuden Power Inductors: Leading DC Bias Characteristics

June 21, 2011 8:16 am | Product Releases | Comments

Taiyo Yuden has announced details of the commercial release of three new 4mm square wire-wound power inductors, the NRS4010 (4.0x4.0x1.0mm), the NRS4012 (4.0x4.0x1.2mm) and the NRS4018 (4.0x.4.0x1.8mm), each representing a maximum thickness. At an inductance value of 2.2µH, the NRS4018T2R2M achieves a saturation current of 3.

LISTED UNDER: Passives, Inductors

New Flat Wire Inductors Excel At High Temperatures

June 17, 2011 9:51 am | Product Releases | Comments

Featuring a “flat wire” design that is coiled and mounted directly to the circuit board to allow efficient heat dissipation, the new DR79892 and DR79893 Flat Wire Inductors from Datatronic Distribution, are designed for performance in power supplies, industrial controls and instrumentation applications.

LISTED UNDER: Passives, Inductors

Richardson RFPD Selected as Sole Distributor for ATC Ultra-Broadband 506WLC Series Inductors

June 15, 2011 6:06 am | Wireless Design & Development | Product Releases | Comments

Richardson RFPD announced it has been selected by American Technical Ceramics (ATC) as the global exclusive distributor for the new 506WLC Series of Ultra-Broadband Inductors. This select group of inductors has been engineered with a powdered iron ferrite core and gold plated terminations to provide reliable and repeatable ultra-broadband performance beyond 40 GHz.

LISTED UNDER: Passives, Inductors | Ceramics

SMT Flat Coil Inductors Aimed at High-Current Applications

June 7, 2011 2:27 pm | Product Releases | Comments

Murata Power Solutions today announced three new series of surface mount inductors aimed at high current applications where low loss characteristics are essential. The 3700, 3800 and 3900 series are flat coil inductors that provide a wide range of inductance values from 0.15 to 10uH with DC current ratings up to 19.

LISTED UNDER: Passives, Inductors

Gowanda to Introduce Ultra-Broadband Conical Inductors at MTT-S IMS2011

May 18, 2011 5:55 am | Product Releases | Comments

Gowanda Electronics, a designer and manufacturer of precision electronic components for RF and power applications, is launching its inaugural line of Ultra-Broadband Conical Inductors at the MTT-S International Microwave Symposium (IMS2011) Exhibition in Baltimore, Maryland on June 7-9, 2011 (Booth 730).

LISTED UNDER: Passives, Inductors

Small Footprint Surface-Mount Inductors

December 3, 2010 6:58 am | Product Releases | Comments

The 2200RM series of bobbin wound inductors from Murata Power Solutions provides a surface mount alternative to the company’s well established through-hole 2200R series. Suitable for use in a wide range of low to medium current applications, compact 2200RM inductors have a small footprint making them ideal for use in high density designs where a chip inductor is unable to cope with the power requirement....

LISTED UNDER: Passives, Inductors

Compact, Low Profile Power Inductors for Mobile Devices

August 26, 2010 7:34 am | Product Releases | Comments

Taiyo Yuden’s new BRL2515 (2.5mm x 1.5mm, with a maximum height of 1.2mm) and BRFL2518 (2.5mm x 1.8mm, with a maximum height of 1.0mm) wire-wound power inductors offer industry-leading DC bias characteristics in a thinner, smaller size. With a rated saturation current of 1000 mA and inductance of 2....

LISTED UNDER: Passives, Inductors

Common Mode Toroid Power Inductors/Chokes

August 17, 2010 11:41 am | Product Releases | Comments

Prem Magnetics, Inc. has recently introduced several series of common-mode chokes for reducing unwanted common-mode noise signals on a power line. Comprising a total of 128 parts utilizing 7 different mounting packages, the SPCM series covers inductance values ranging from 65.0uHy to 120mHy and current values ranging from 0....

LISTED UNDER: Passives, Inductors

Tunable Inductors with Non-Magnetic Cores Available in a Complete Sample Kit

June 21, 2010 5:27 am | Product Releases | Comments

The new JLC series of high-Q variable coils from Johanson Manufacturing, available from Richardson Electronics, offers a wide tuning range of 30 to 133 nH and self-resonant frequencies of 700 to 1500 MHz, which make them appropriate tuning devices for many RF applications. These coils also feature a non-magnetic core for use in MRI systems or other magnetically sensitive circuits.

LISTED UNDER: Passives, Inductors

Rugged Inductors Suitable for Automotives

October 8, 2009 10:44 am | Product Releases | Comments

Featuring a base plate with injection-molded termination clips, rugged SMT power inductors from EPCOS increase mechanical stability and improve temperature distribution during the solder process for automotives. With dimensions ranging between 7.3 mm x 7.3 mm x 4.5 mm and 12.5 mm x 12.5 mm x 8.5 mm, the inductors offer inductances from 0.

LISTED UNDER: Automotive | Automotive | Passives, Inductors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading