Advertisement

Metal Alloy Strip Resistors

February 25, 2005 9:10 am | Product Releases | Comments

Providing design engineers with a rugged surface mount current-sense device capable of handling high current loads, TT electronics IRC Wirewound and Film Technologies Division has developed a low resistance (< 2 mΩ), surface mount metal strip resistor rated for 45 A of current at 1 W while exhibiting low inductance and low TCRs....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

LTCC Resistors

December 23, 2004 7:57 am | Product Releases | Comments

Ferro Electronic Material Systems introduces LTCC resistors that combine low temperature coefficient of resistance (TCR) with tight tolerances and eliminate the need for discrete resistor components. The 82-series post-fired thick film resistor pastes for A6M/Gold LTCC were developed for high frequency transmitter/receiver modules used in military and other applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

CTN Resistors

April 7, 2004 11:03 am | Product Releases | Comments

Vishay announces that it is adding new devices with an absolute TCR of 䔮 ppm over the 㫏°C to +125°C temperature range to its CTN series of 30 mil center-tapped nichrome resistor chips. With excellent stability at 250 mW power levels and a compact chip size of 0.030 inches× 0....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors
Advertisement

Lead-Free Resistors

March 10, 2004 8:03 am | Product Releases | Comments

IMS announces the availability of lead-free compatible thick film chip resistor components for customers transitioning to lead-free circuit assembly. These products feature lead-free end terminal metallizations designed for compatibility with all lead-free alloys and flux systems currently available....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

COTS Family of Thin Film Resistors

February 2, 2004 8:06 am | Product Releases | Comments

IRC introduces the COTS (commercial off-the-shelf) family of its TaNFilm® and TaNSil® thin film resistors. Using the same manufacturing equipment and materials as the military qualified thin film resistors, IRC's COTS-level products are suitable for military and aerospace applications. The family includes Precision Thin Film Chip Resistors (PFC), the High reliability DIP network, the LR Series, the Flat Pack Series Resistor Network, t...

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Resistors

January 21, 2004 10:48 am | Product Releases | Comments

KOA introduces fixed carbon composition non-inductive, low-capacitance resistor series the RC 1/4 and RC 1/2 . A resistance range is available with the RC 1/4 and 1/2, from 1 Ω to 22 MΩ, tolerance available are ± 5% and ± 10% at 0.25 V and 0.5 V respectively, with a stability class of 10%, limiting element voltage of 250 V, 350 V, and isolation voltage of 100 V and 500 V....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Thin Film Resistors

November 24, 2003 7:19 am | Product Releases | Comments

TT electronics IRC Advanced Film Division has introduced the COTS (commercial off-the-shelf) family of its TaNFilm and TaNSil thin film resistors. Using the same manufacturing equipment and materials as the military qualified thin film resistors, IRC's COTS-level products ensure long life stability in military and aerospace applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Pulse Withstanding Resistors

October 28, 2003 9:49 am | Product Releases | Comments

OhmCraft introduces high voltage pulse withstanding resistors. A 100 kΩ 2512 chip resistor absorbs 2.0 Joules with a 6 kV peak pulse. These HPC series resistors are Fine Film( surface mount devices that are ideal for defibrillators, pace makers, power supplies, and other applications where high voltage pulse protection is essential....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors
Advertisement

Millimeterwave Resistors and Terminations

September 2, 2003 8:28 am | Product Releases | Comments

IMS announces several product families of thick film chip resistors and attenuators characterized at the 10, 20, and 40 GHz frequency bands. The high frequency response of these devices makes them suited for hybrid millimeter wave communication circuits extending from fiber optic circuits and instrumentation applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Termination Resistors

July 30, 2003 9:51 am | Product Releases | Comments

International Manufacturing Services, Inc. (IMS) announces low VSWR termination resistors suitable for applications as isolator circuits in RF and microwave amplifiers and antenna systems. Power handling for the devices is 150 watts. Minimum reflection is obtained by presenting a low VSWR to a matched system while maintaining 50 Ω of resistance....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Power Resistors

July 8, 2003 11:09 am | Product Releases | Comments

TT electronics IRC Advanced Film Division introduces a D2-style (T0-263) power resistor. Designated the D2PAK Series, these non-inductive resistors are rated for 20 W at a 25°C case temperature. Typical applications for the D2PAK Series include power supplies, industrial controls, and power-switching circuits....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Think Film Resistors

July 8, 2003 11:09 am | Product Releases | Comments

Micrometrics NiChrome thing film resistors offer stability, low noise, and excellent TCR. By utilizing NiChrome as the resistive layer, these devices are capable of achieving TCR characteristics of < 25 ppm. They are available in a large selection of outline types, resistance values and tolerances....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Thin-Film Resistors

May 30, 2003 11:38 am | Product Releases | Comments

The Vishay Electro-Films Back Contact Resistor (BCR) series measures 0.020 inches× 0.020 inches. the resistor chips require one wire bond because a second electrical connection is made through the back of the chip, which may be attached to the substrate either eutectically or with conductive epoxy....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Foil Resistors

May 30, 2003 11:38 am | Product Releases | Comments

The RNC90Z family of military established reliability foil resistors has a resistance range up to 121 KW with a low TCR of 2.0 ppm/°C. The RNC90Z resistors are military-qualified to MIL-PRF 55182/9 with characteristic "Z" limits. The devices have a resistance range of 100 W to 121 KW, in addition to standard resistance tolerances from ± 1....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

High Frequency Resistors

April 29, 2003 7:36 am | Product Releases | Comments

These high frequency chip resistors are ideal for use in RF and microwave applications. The components are available in 14 standard case sizes: 0402 through 3838. they are available with single surface or wrap around terminations, and a variety of termination materials for solder mount epoxy bond, or wire bond applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading