Advertisement

SMD Inductors

March 28, 2003 3:55 am | Product Releases | Comments

The DR349 Series SMD inductor features low seated profiles from 0.095 inches (2.4 mm) maximum to 0.198 inches (5.3 mm) maximum above the circuit board and operates over the temperature range of – 20°C to +80°C. The DR349 Series SMD inductors combing high-performance and dependability for high frequency filter applications....

LISTED UNDER: Passives, Inductors
Advertisement

SMT Resistors

March 28, 2003 3:55 am | Product Releases | Comments

IMS introduces the S family of surface mount resistors. The S series offer customers the ability to operate circuits at higher power levels without having to redesign the circuit or increase the component size. Resistor sizes include 0402, 0603, 0805, 1206, 2010, and 2512, respectively. Included is the RCX-0402S at 160 mW, RCX-0603S at 200 mW, RCX-0805S at 350 mW, and RCX-1206S at 500 mW....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

RF Inductors

March 28, 2003 3:52 am | Product Releases | Comments

The CF1008 surface mount inductor series has low inductance values and high current ratings. The models provide inductance values ranging from 0.10 microHenries to 1 microHenry....

LISTED UNDER: Passives, Inductors

Ferrite Chip Inductors

March 28, 2003 3:51 am | Product Releases | Comments

These large, wire wound ferrite chip inductors fill the needs of low power filter processing and higher power signal processing circuits. They are designed for optimum performance in the 10 to 100 MHz range. typical applications range from large RF circuit board assemblies to small handheld portable devices....

LISTED UNDER: Passives, Inductors

Mini Air Filters

January 27, 2003 9:47 am | Product Releases | Comments

Universal Air Filter introduces new mini air filters that are fully framed, cleanable air filters for ruggedized mobile rackmount computers in applications such as medical, telecommunications, and seismic imaging....

LISTED UNDER: Filters, IC

Material for Power Inductors

January 27, 2003 9:34 am | Product Releases | Comments

MMT Magnetics developed a silicon iron alloy material designed to maximize energy storage and minimize power density losses within inductors for power applications. Designated as DuraFlux™, this alloy material exhibits a high saturation flux density and a high DC bias capability to make magnetic components more energy efficient....

LISTED UNDER: Passives, Inductors

SMD Power Inductors

January 27, 2003 9:34 am | Product Releases | Comments

Model CSH 1250S/CSH series of low profile power inductors have windings consisting of a flat stock conductor, wound perpendicular to the axis of the core. Dimensions are of 12 × 12 × 5.6 mm(CSH1250S) and 12.5 × 12.5 × 5.6 mm (CS1260S). The devices are magnetically shielded and operating temperature rate is – 30°C to +100°C....

LISTED UNDER: Passives, Inductors

Low Profile Fixed Inductors

November 1, 2002 6:08 am | Product Releases | Comments

The D412F series surface mount fixed inductors have a low profile of 1.2 maximum and a 4.6 × 4.6 mm footprint. The D412F is ideal for a variety of DC/DC converter applications. Available in 2.2 to 47.0 μF inductance values, the D412F series has a maximum direct current rating of 1.33 amps at 2....

LISTED UNDER: Passives, Inductors

Axial Resistors

November 1, 2002 6:04 am | Product Releases | Comments

IRC Wirewound and Film Technologies Division introduced a series of compact carbon composition resistors capable of handling overload voltages up to 1000 V and energy pulses up to 35 J. The CCR series is rated for 1 W at 25°C with a maximum overload voltage of 1000 V, limiting element voltage of 500 V, and pulse handling rating up to 35 J....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Chip Resistors

September 27, 2002 7:01 am | Product Releases | Comments

The new QPL sizes are as follows: RM0502 (/01) is a .050 inches× .020 inches with >power ratings of 10 mW characteristics E (25 ppm), H (50 ppm) and 20 mW characteristics K (100 ppm), M (300 ppm). Maximum voltage rating for the RM0502 is 40 volts. RM0402 (/11) is a .040IN> times> .020IN> with power ratings of 40 mW characteristics E (25 ppm), H (50 ppm), K (100 ppm), and M (300 ppm)....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Low Cost Resistors

September 11, 2002 5:38 am | Product Releases | Comments

The LTC1921, available in MSOP-8, plus three low cost resistors, provide a complete precision dual 㫈 V battery voltage and fuse monitoring solution for high reliability telecom equipment in less than 20 mm 2 . The three separate alarm outputs drive three optocouplers or green LEDs. Should either of the 㫈 V supplies have an undervoltage (㪾....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Miniature SMT Inductors

September 11, 2002 5:38 am | Product Releases | Comments

     The SMI-4 Series consists of 18 parts. Inductance values range from 10.0 μHy @ 3.63 amps to 820.0 μHy @ .38 amps. Tolerances for inductance values is 20% for the 10.0 μHy to 47.0 μHy values and 10% for the 56.0 μHy to 820.0 μHy values. Typical dimensions are 0....

LISTED UNDER: Passives, Inductors

Miniature Chip Inductors

September 11, 2002 5:17 am | Product Releases | Comments

Available with chip sizes down to 0402, the BCcomponents series of multi-layer ceramic chip inductors offer devices with high Q values at high frequencies and typical self resonant frequencies of more than 6000 MHz. Devices in the general-purpose series of multi-layer ferrite chip inductors are supplied in sizes down to 0603 and provide significant PCB space savings....

LISTED UNDER: Passives, Inductors

Low Pass Filters

July 10, 2002 7:12 am | Product Releases | Comments

Flann Microwave has extended their range of performance low pass microwave filters from 2.6 to 112 GHz passband. The filters are precision manufactured from solid brass and are used for removing undesirable higher harmonics. Typical applications include source refinement and swept frequency measurement....

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading