EMC Filters for Medical Applications

October 17, 2007 6:36 am | Product Releases | Comments

EPCOS’ SIFI-F (B84111FM) compact two-line filters are available in a medical version for applications where low leakage current is a critical factor. They have a low maximum leakage current of 2 mA, and they offer desirable suppression of symmetrical and asymmetrical interference. The SIFI-F, along with the larger SIFI-G and SIFI-H, is designed for the climate category of 㪱°C up to +100°C....

LISTED UNDER: Medical | Filters, IC

COTS Single Line Feed-thru EMI Filters

October 17, 2007 6:36 am | Product Releases | Comments

Spectrum Control, Inc. offers COTS single line feed-thru EMI filters that are commercially equivalent to M15733-PRF/72, M15733-PRF/73 and M15733-PRF/74. These filters are offered in both AC and DC models with customizing options available, and they are suitable for the military and aerospace industries....


Waveguide Low-Pass Filters

October 17, 2007 6:36 am | Product Releases | Comments

Link Microtek introduces its AMQ-LP1 series of waveguide low-pass filters that provide a rejection of better than 100 dB, falling to 70 dB at band edges. The filter series comprises five standard parts, using waveguide sizes of WR340, WR137, WR112, WR90 and WR75 to deliver cut-off frequencies of 2....


Surface-Mount Power Inductors

August 10, 2007 11:58 am | Product Releases | Comments

C & D Technologies introduces five series of bobbin format inductors, the 4500, 4600, 4700S, 4800S and 4900S that offer a range of inductance values and current ratings to provide choices for different applications. Their compact design aids their inclusion in applications where PCB real-estate is limited and component height is restricted....

LISTED UNDER: Passives, Inductors

Selecting Miniature Passive Components for WiMAX and WLAN Applications

August 8, 2007 7:50 am | Wireless Design & Development | Product Releases | Comments

When exploring passive component options, asking the right questions upfront can ensure the correct component is selected for your design. By Michael Dakhiya, Chris Reynolds, Kevin Christian, Avital Yaish, AVX Corporation 1. Basic design steps for selecting the correct standard passive component In a wireless world, consumers have come to expect smaller, faster, and more sophisticated electronic/electrical products from equipment ma...

LISTED UNDER: Passives, Capacitors | Ceramics

RF Filters

July 2, 2007 1:02 pm | Product Releases | Comments

Q Microwave, Inc. announces a line of RF filters customized for RF and microwave system requirements operating over the range of 500 MHz to 6 GHz. The filters are available in low-cost, surface-mount technology (SMT) package designs for high reliability and ease of assembly. These filters are good solutions for use in identification friend or foe (IFF) systems or any other applications requiring rugged and robust filter designs in demanding...


Surface Mount Power Inductors

April 30, 2007 5:45 am | Product Releases | Comments

TT electronics and BI Technologies Magnetic Components Division develops a family of surface mount power inductors in four low-profile package types. Designated the HM62 Series, the inductors exhibit high self-resonant frequencies up to Q value. All inductors in the HM62 Series family feature an operating temperature range of -40°C to +85°C....

LISTED UNDER: Passives, Inductors

Low-Pass/Risetime Filters

April 17, 2007 7:24 am | Product Releases | Comments

Picosecond Pulse Labs, Inc. announces the five-day turnaround of its Model 5915, custom low-pass or risetime filters that can be built to the user's specified -3 dB cutoff frequency from 35 MHz to 10 GHz or to any 10 to 90% risetime between 35 ps and 10 ns. These custom filters are manufactured using a proprietary, absorptive design that provides attenuation and group delay characteristics with transient response....


Passive Mixer

March 13, 2007 12:50 pm | Product Releases | Comments

Maxim Integrated Products introduces the MAX2031, a fully integrated, 815 to 1000 MHz SiGe passive mixer. This single IC provides 36dBm of IIP3, 27dBm of IP1dB, 7dB of noise figure and a conversion loss of only 7 dB. In addition, the MAX2031 exhibits excellent 2nd and 3rd-order spurious suppression....

LISTED UNDER: Passives, Capacitors

Low and High Pass Filters

February 26, 2007 10:55 am | Product Releases | Comments

Mini-Circuits announces the LFCN low pass filters and HFCN high pass filters, which deliver high rejection outside the pass-band and virtually eliminate PC board space demand. There is a broad range of models with plenty of desirable features, which start with a tiny 0.12" × 0.06" hermetically sealed package and good pricing....


Low-Profile Surface Mount Inductors

February 9, 2007 5:02 am | Product Releases | Comments

Datatronic Distribution, Inc. introduces its low-profile DR331-5 surface mount inductor that offers EMI protection performance and reliability in a miniature package. They are suitable for portable, compact and miniature devices such as PDAs, mobile phones, portable hard drives, medical appliances and bar code scannersIt features a wide inductance range from 1....

LISTED UNDER: Passives, Inductors

Plastic EMC Filters

February 9, 2007 5:02 am | Product Releases | Comments

Schaffner EMC introduces its EMC filters with modern plastic housings. Because of their design, these low-leakage, three-phase EMC filters are compact, lightweight and they offer a high level of functionality. Feature electrical connections based on motor drive technology, hinged transparent safety covers and filter circuitry with low Y-capacitor values to minimize the filter’s leakage current....


Coated Wirewound Resistors

January 30, 2007 12:11 pm | Product Releases | Comments

TT electronics IRC Wire and Film Technologies Division annouces a series of molded and conformally coated wirewound resistors and combination resistor/fuses. Designated the SP and SPP Series resistors, the product family consists of the SP20F (1-watt molded fusible resistor); the SPF Series (2-watt molded fusible resistor); the SP20 Series (1-watt molded general purpose resistor); and the SPH (2-watt general purpose molded resistor)....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Non-molded Power Resistors

December 27, 2006 11:10 am | Product Releases | Comments

BI Technologies SMT Division announces a non-molded power resistor rated up to 75 W. Designated the BHP75 Series, the resistor is housed in a TO-220 opened screened substrate package and features an insulated tapered venturi bonded to the substrate for maximum heat dissipation. Typical applications for the BHP75 resistor include higher wattage switch-mode power supply circuits, motor control and drive circuits, inverters and industrial powe...

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

High current inductors

November 16, 2006 11:10 am | Product Releases | Comments

Tyco Electronics introduces the CoEv brand series of high current inductors. The product series is well suited for a wide range of high current applications in computers, power supplies, DC/DC converters, AC/DC converters and battery-powered devices. These low profile molded inductors are designed to suppress and filter AC ripple in DC output circuits.

LISTED UNDER: Passives, Inductors


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.