Advertisement

Low Profile Inductors

November 1, 2005 9:58 am | Product Releases | Comments

The IHLP-4040DZ-15, available from Vishay, offers low DCR/H and is available in a 0.402 × 0.402 inches [10.2 × 10.2 mm] package with a low 0.157 inches [4.0 mm] height profile. The inductor is a space- and power-saving device that features DCR values down to 0.50 mΩ at 0.19 H. This Vishay Dale power inductor is intended for DC/DC converter applications in end products including next-generation mobile devices; notebooks, deskto...

LISTED UNDER: Passives, Inductors
Advertisement

SMD High Current Inductors

October 3, 2005 9:16 am | Product Releases | Comments

With their powerful magnetic shield, the low profile DR363 and DR364 series surface mount inductors from Datatronic Distribution, Inc., provide reliable protection against challenging EMI problems in high current applications. The DR363 and DR364 feature a seated profile measuring 0.118 inches (3....

LISTED UNDER: Passives, Inductors

Shielded SMT Inductors

October 3, 2005 9:16 am | Product Releases | Comments

TT Electronics, BI Technologies Magnetic Components Division, recently developed a series of high current, low profile power inductors that are rated for operation to 180° C. Designated the HM70 series, these surface mount devices provide design engineers with a compact inductor appropriate for high-temperature applications where PC board space is at a premium....

LISTED UNDER: Passives, Inductors

Harmonic Waveguide Filters

October 3, 2005 9:16 am | Product Releases | Comments

Microtek introduces a range of in-house manufactured absorptive harmonic waveguide filters, which, when used with high-power microwave amplifiers, avoid the potential damage that reflective filters can cause. The AMQ-HARM series of filters is designed to absorb signals with harmonic frequencies higher than the specified pass band, rather than reflecting them back to the amplifier....

LISTED UNDER: Filters, IC

Wirewound Resistors

October 3, 2005 9:16 am | Product Releases | Comments

Ohmite Manufacturing Company introduces its P series molded precision wirewound resistors. Designed to meet the exacting requirements of Military Specification MIL-R-93, the series offers high stability and low Temperature Coefficient of Resistance (TCR). These resistors offer tolerances of ± 0....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Multilayer Chip Inductors

September 2, 2005 7:32 am | Product Releases | Comments

Taiyo Yuden announces two new products in its series of high-frequency multilayer chip inductors, providing high inductance and high-Q factor performance characteristics. The HK series (high inductance) is a 100 nH-rated chip inductor in EIA 0201 case size. The HKQ series (high-Q) represents a new line of 0201 high-Q chip inductors (1-10 nH) with 30% higher Q values than previous series devices, relative to case size....

LISTED UNDER: Passives, Inductors

Thick Film Power Resistors

August 3, 2005 6:38 am | Product Releases | Comments

Vishay introduces 30, 50 and 100 W devices in industry-standard TO220 and TO247 packages. The resistors use a ceramic package design (with no metal tab) for direct-mounting on heatsinks, and feature low inductance of < 0.1 H, making them appropriate for use in power conversion and control applications in a variety of industries....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Single- and Dual-band SAW Filters

August 3, 2005 6:38 am | Product Releases | Comments

Murata Electronics introduces single-band (SAFEB) and dual-band (SAWEP) SAW filters for use in cell phones, combining film micro-machining technology with high-density mounting capabilities and resin sealing. The SAFEB series is now available in the dimensions of 1.35 × 1.05 × 0.6 mm, weighing 0....

LISTED UNDER: Filters, IC

BAW Filters and Duplexers

August 3, 2005 6:33 am | Product Releases | Comments

Royal Philips Electronics announces a family of advanced, bulk acoustic wave (BAW) filters and duplexers that enhance the performance of multimedia mobile phones. The filters feature patented reduced form factor chip-scale packaging technology. This improves the performance and reception of GSM and 3G mobile phones, while reducing space in mobile handset designs....

LISTED UNDER: Filters, IC

EMI/RFI Filters

June 2, 2005 7:23 am | Product Releases | Comments

Spectrum Control introduces a line of high current/high voltage resin sealed EMI/RFI filters with current ratings to 100 A. This filter line offers continuous voltage ratings up to 1250 VDC/240 VAC (400 Hz) and capacitance values from 1000 pF to 0.22µf. Spectrum Control’s high current/high voltage EMI/RFI filters are recognized to UL 60950 and certified to CSA C22....

LISTED UNDER: Filters, IC

Thick Film Resistors

June 1, 2005 7:22 am | Product Releases | Comments

KOA Speer introduces a small size to its RK73 family of thick film resistors. The ultra small 0201 (0.6 × 0.3 mm) size resistor is designed to fulfill applications such as high frequency devices and medical equipment. The 0201 resistor features tolerances of +0.5%, +1%, +2% and +5%, a resistance range of 1Ω to 10 MΩ, T....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Current Sense Resistors

June 1, 2005 7:22 am | Product Releases | Comments

KOA Speer introduces a current sense resistor that features an ultra-low TCR (75 ppm ° C), ultra-low resistance (2mΩ and good high frequency characteristics. The TLR-75 ppm is a 1% tolerance current sense resistor with metal plate construction for corrosion and heat resistance. The TLR-75 ppm resistor is available in 1206, 2010 and 2512 sizes and resistance ranges from 2mΩ to 20mΩ....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Thin Film Chip Inductors

May 2, 2005 6:04 am | Product Releases | Comments

Vishay announces the release of two thin film chip inductors in compact 0402 and 0603 case sizes that provide high Q values up to 49 at specified frequencies from 100 MHz to 1700 MHz. The Vishay Dale IFCB-0402 and IFCB-0603 are designed to provide stable inductance during high-frequency operation in communications devices such as cell phones, pagers, GPS devices and wireless LANs, as well as for VCO, TCXO circuit and RF transceiver modules....

LISTED UNDER: Passives, Inductors

Metal Alloy Strip Resistors

February 25, 2005 9:10 am | Product Releases | Comments

Providing design engineers with a rugged surface mount current-sense device capable of handling high current loads, TT electronics IRC Wirewound and Film Technologies Division has developed a low resistance (< 2 mΩ), surface mount metal strip resistor rated for 45 A of current at 1 W while exhibiting low inductance and low TCRs....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

LTCC Resistors

December 23, 2004 7:57 am | Product Releases | Comments

Ferro Electronic Material Systems introduces LTCC resistors that combine low temperature coefficient of resistance (TCR) with tight tolerances and eliminate the need for discrete resistor components. The 82-series post-fired thick film resistor pastes for A6M/Gold LTCC were developed for high frequency transmitter/receiver modules used in military and other applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading