Advertisement

Skyworks High-Power, Ceramic-Based Filters Serve Military and Homeland Security Markets

June 13, 2011 10:22 am | Product Releases | Comments

Skyworks Solutions introduced connectorized, high power filters for military, homeland security, airborne and high-end commercial transceiver applications. These smaller, lighter and more portable solutions offer customers significant design benefits and flexibility when compared to the more traditional and much larger metallic-cavity filters.

LISTED UNDER: Military-Aerospace | Filters, IC

SMT Flat Coil Inductors Aimed at High-Current Applications

June 7, 2011 2:27 pm | Product Releases | Comments

Murata Power Solutions today announced three new series of surface mount inductors aimed at high current applications where low loss characteristics are essential. The 3700, 3800 and 3900 series are flat coil inductors that provide a wide range of inductance values from 0.15 to 10uH with DC current ratings up to 19.

LISTED UNDER: Passives, Inductors

High-voltage COTS Filters Perform over an Extended Temperature Range

May 18, 2011 2:16 pm | Product Releases | Comments

LCR  Electronics, a leading manufacturer of EMI filters and electronic control products as well as high-end enclosures for military, telecom and commercial applications, now offers a line of single phase 300 VAC 50/60Hz COTS filters ideal for high reliability applications as found in the lighting, military and medical industries.

LISTED UNDER: Filters, IC
Advertisement

Gowanda to Introduce Ultra-Broadband Conical Inductors at MTT-S IMS2011

May 18, 2011 5:55 am | Product Releases | Comments

Gowanda Electronics, a designer and manufacturer of precision electronic components for RF and power applications, is launching its inaugural line of Ultra-Broadband Conical Inductors at the MTT-S International Microwave Symposium (IMS2011) Exhibition in Baltimore, Maryland on June 7-9, 2011 (Booth 730).

LISTED UNDER: Passives, Inductors

Band-Pass MMIC Filters in Compact SMT Packages

April 18, 2011 9:23 am | Product Releases | Comments

Hittite Corporation has introduced three new SMT packaged MMIC Band-Pass Tunable Filters which are ideal for pre-selection in multi-band communication systems, wideband radar, and in test and measurement equipment. Tunable over a 4.0 GHz to 19.0 GHz frequency range, these three new, ultra-compact, varactor-tuned, MMIC filters are inherently stable and their small physical size and insensitivity to environmental conditions provide a superior...

LISTED UNDER: Semiconductors, MMIC | Filters, IC

Chip Capacitors for High Speed Circuits

April 7, 2011 10:11 am | Product Releases | Comments

Syfer Technology has announced that its E01 and E07 ranges of feedthrough 3 terminal ‘C’ chip filters are now available in smaller packages, as small as 0603. These devices are designed primarily for general signal filtering in circuits incorporating high speed digital circuitry, particularly in automotive and communications industries....

LISTED UNDER: Passives, Capacitors

Coin Cell Style Supercapacitors Provide Memory Backup for Critical Circuits

March 16, 2011 10:16 am | Product Releases | Comments

The DC Series of Coin Cell Style Supercapacitors from Illinois Capacitor provide on-board memory backup at much longer life spans than batteries. With 0.15 to 8 Farads of capacity, at voltages up to 5.5 WVDC these devices can supply sufficient power to prevent loss of data during a power interruption....

LISTED UNDER: Passives, Capacitors

Tantalum Polymer Capacitors Feature Conductive Polymer Electrode to Reduce Ignition Failure Mode

March 16, 2011 10:16 am | Product Releases | Comments

AVX Corporation has expanded its wide range of SMD tantalum polymer capacitors to deliver industry’s highest CV rating in a low profile package. Ideal for small power modules and handheld devices, the TCN Series tantalum polymer capacitors use an ‘undertab’ design to maximize volumetric efficiency, enabling these devices to provide 150µF/6....

LISTED UNDER: Passives, Capacitors
Advertisement

MLV Clamps Transients and Filters EMI in One Ultra-Compact Device

March 10, 2011 7:21 am | Product Releases | Comments

AVX Corporation provides designers the ability to clamp transients and filter EMI at a significantly higher voltage with the expansion of its Transguard® multilayer varistor series. Designed for all small handheld devices, the miniature 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss....

LISTED UNDER: Filters, IC

IMS Introduces HVI Series High Voltage Surface Mount Chip Resistors to 3kV

March 7, 2011 9:11 am | Wireless Design & Development | Product Releases | Comments

International Manufacturing Services, Inc. (IMS), a leading manufacturer and supplier of high quality thick film resistors, terminations, attenuators, couplers, thermal management devices, planar dividers and planar filters to the electronics industry, introduces their line of HVI Series chip resistors especially suited for high voltage applications....

LISTED UNDER: Passives, Fixed Resistors | Passives, Variable Resistors | Test and Measurement, Power Meters

High-Performance Passive Intermodulation (PIM™) Analyzer

January 5, 2011 8:00 am | Product Releases | Comments

Anritsu Company introduces the MW8219A PIM Master™, the industry’s first field test solution that can accurately and quickly locate the source of passive intermodulation (PIM), whether it is at the base station or in the surrounding environment. Covering the PCS and AWS cellular frequency ranges, the MW8219A provides field personnel with a test system that can help ensure optimum network performance and also locate PIM faults before intermo...

LISTED UNDER: Passives, Capacitors | Test and Measurement, Analyzers, Spectrum

Two Innovative Chip Filters for Cellular Band Applications

December 8, 2010 9:02 am | Product Releases | Comments

Taiyo Yuden’s latest lines of chip filters optimize the performance, while minimizing the size, of mobile phones. The exceptionally compact EIA 0603 size multilayer dual low pass filter is designed for use with multi-band smartphones, while two new optimized EIA 0805 size multilayer diplexers were developed for use with mobile phones....

LISTED UNDER: Filters, IC

Small Footprint Surface-Mount Inductors

December 3, 2010 6:58 am | Product Releases | Comments

The 2200RM series of bobbin wound inductors from Murata Power Solutions provides a surface mount alternative to the company’s well established through-hole 2200R series. Suitable for use in a wide range of low to medium current applications, compact 2200RM inductors have a small footprint making them ideal for use in high density designs where a chip inductor is unable to cope with the power requirement....

LISTED UNDER: Passives, Inductors

High Pass Filters Designed for Test and Lab Use

November 24, 2010 7:00 am | Product Releases | Comments

Crystek has introduced a new line of High Pass Filters, designated the CHPFL Series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use. Five models, with frequency ranges from DC to 100 MHz through 1 GHz, compose the CHPFL line.<br><br> The Crystek CHPFL High Pass Filter line has excellent out-of-band rejection, and features 7th Order Butterworth Response and 50 ohm SMA conne...

LISTED UNDER: Services, Calibration / Test | Filters, IC

Four New SMT Passive Attenuator Pads for DC to 25 GHz Applications

November 12, 2010 8:30 am | Product Releases | Comments

Hittite Microwave Corporation has introduced four new wideband fixed value attenuator products. These innovative SMT attenuator pads are the perfect solution for a wide range of applications including microwave radio, military subsystems, fiber optics, scientific instruments and sensor applications up to 25 GHz....

LISTED UNDER: Passives, Capacitors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading