Advertisement

Passive Products Offer 0 dB through 20 dB Attenuation

April 3, 2008 10:53 am | Product Releases | Comments

Hittite Microwave Corp. announces its family of passive wideband fixed attenuator pads in die format that operate in the DC to 50 GHz frequency band. These fixed attenuator chips are suitable for use in applications that include microwave radio, military and space hybrid circuits, fiber optics, scientific instruments and general engineering prototypes....

LISTED UNDER: Passives, Capacitors
Advertisement

Passive Mixer Includes an On-Chip LO Buffer

April 3, 2008 10:53 am | Product Releases | Comments

Analog Devices, Inc. announces its model ADL5350 small footprint high performance passive mixer. This GaAs pHEMT passive mixer can be used in both down-conversion receiver and up-conversion transmit path applications within a broad frequency range to 4 GHz. The mixer includes an on-chip LO buffer, minimizing the need for an external drive amplifier that is commonly required by some GaAs FET based mixers....

LISTED UNDER: Passives, Capacitors

Passive GaAs MMIC Mixers Deliver a Wide IF Bandwidth

April 3, 2008 10:53 am | Product Releases | Comments

Hittite Microwave Corporation announces its double balanced GaAs MESFET mixers for use in test and measurement systems, military radios, commercial sensors and transceiver infrastructure, including critical functions of fixed and mobile protocols such as WiMAX and VSAT applications. The HMC557LC4 passive double balanced mixer provides an LO to RF port isolation of 48 dB and an input IP3 of +22 dBm across the frequency range of 2....

LISTED UNDER: Passives, Capacitors | Semiconductors, MMIC

Key Parameters for Selecting RF Inductors

January 23, 2008 4:42 am | Product Releases | Comments

By Chris Hare, Coilcraft What factors do I need to consider? RF inductor selection involves seven key parameters: mounting (surface mount or through-hole), inductance value, current rating, DC resistance (DCR), self-resonant frequency (SRF), Q factor, and temperature rating. While small size is typically desired, the laws of physics limit how small an inductor can be for a given application....

LISTED UNDER: Passives, Inductors

Integrated EMI Filters and the Need for More Bandwidth

December 12, 2007 5:36 am | Product Releases | Comments

In previous generations of cell phones, when the design called for more data to be moved around, the solution was to add more data lines. Only a handful of data lines were sufficient at first, since there was only basic numeric data to be displayed and data rates were rather low. We all remember the old analog flip phones with their LED displays, you pushed the keypad and a digit appeared....

LISTED UNDER: Filters, IC

Thin Film Low Pass Filters

November 15, 2007 7:48 am | Product Releases | Comments

State of the Art (SOTA), Inc. announces an addition of thin film low pass filters to its high frequency product line. --> State of the Art (SOTA), Inc. announces an addition of thin film low pass filters to its high frequency product line. Sub-miniature case size (0.150 × 0.100 × 0.025) low pass filters (LPF) are available on 99% alumina substrate constructed using high stability thin film planar technology, 50 ohm terminations a...

LISTED UNDER: Filters, IC

Current Sense Chip Resistors for Automotive Applications

November 15, 2007 7:48 am | Product Releases | Comments

TT electronics IRC Advanced Film Division offers its LRF3W series 3 W surface mount chip resistors that are offered in a package size traditionally rated at 1 W. Because of its high power rating in a space-saving package, the series’ resistors are suitable for high current-sensing automotive applications including fuel-gauging and over-current detection, AC/DC power supplies and VRMs, motorized seats, power windows, seat heaters and automot...

LISTED UNDER: Automotive | Automotive | Passives, Fixed Resistors

Brand Feed Through Filters and Capacitors

November 8, 2007 7:41 am | Product Releases | Comments

Tyco Electronics Corporation introduces a line of CORCOM brand feed through filters and capacitors. These filters are suitable for AC applications ranging from 10 to 300 am/s, and DC applications ranging from 10 to 200 am/s. They are designed for high frequency applications such as servers, base stations, routers, power supplies and telecom....

LISTED UNDER: Filters, IC

Cooling Filters

October 17, 2007 6:36 am | Product Releases | Comments

W. L. Gore & Associates, Inc. announces an addition to its line of telecommunications products for improving system reliability. The GORE® Cooling Filters use ambient air to cool electronic components in outdoor enclosures and Gore’s membrane technology to protect sensitive electronics from extreme environments where they may encounter corrosive particles, sand or salty environments....

LISTED UNDER: Filters, IC

COTS Single Line Feed-thru EMI Filters

October 17, 2007 6:36 am | Product Releases | Comments

Spectrum Control, Inc. offers COTS single line feed-thru EMI filters that are commercially equivalent to M15733-PRF/72, M15733-PRF/73 and M15733-PRF/74. These filters are offered in both AC and DC models with customizing options available, and they are suitable for the military and aerospace industries....

LISTED UNDER: Filters, IC

Waveguide Low-Pass Filters

October 17, 2007 6:36 am | Product Releases | Comments

Link Microtek introduces its AMQ-LP1 series of waveguide low-pass filters that provide a rejection of better than 100 dB, falling to 70 dB at band edges. The filter series comprises five standard parts, using waveguide sizes of WR340, WR137, WR112, WR90 and WR75 to deliver cut-off frequencies of 2....

LISTED UNDER: Filters, IC

EMC Filters for Medical Applications

October 17, 2007 6:36 am | Product Releases | Comments

EPCOS’ SIFI-F (B84111FM) compact two-line filters are available in a medical version for applications where low leakage current is a critical factor. They have a low maximum leakage current of 2 mA, and they offer desirable suppression of symmetrical and asymmetrical interference. The SIFI-F, along with the larger SIFI-G and SIFI-H, is designed for the climate category of 㪱°C up to +100°C....

LISTED UNDER: Medical | Filters, IC

Surface-Mount Power Inductors

August 10, 2007 11:58 am | Product Releases | Comments

C & D Technologies introduces five series of bobbin format inductors, the 4500, 4600, 4700S, 4800S and 4900S that offer a range of inductance values and current ratings to provide choices for different applications. Their compact design aids their inclusion in applications where PCB real-estate is limited and component height is restricted....

LISTED UNDER: Passives, Inductors

Selecting Miniature Passive Components for WiMAX and WLAN Applications

August 8, 2007 7:50 am | Wireless Design & Development | Product Releases | Comments

When exploring passive component options, asking the right questions upfront can ensure the correct component is selected for your design. By Michael Dakhiya, Chris Reynolds, Kevin Christian, Avital Yaish, AVX Corporation 1. Basic design steps for selecting the correct standard passive component In a wireless world, consumers have come to expect smaller, faster, and more sophisticated electronic/electrical products from equipment ma...

LISTED UNDER: Passives, Capacitors | Ceramics

RF Filters

July 2, 2007 1:02 pm | Product Releases | Comments

Q Microwave, Inc. announces a line of RF filters customized for RF and microwave system requirements operating over the range of 500 MHz to 6 GHz. The filters are available in low-cost, surface-mount technology (SMT) package designs for high reliability and ease of assembly. These filters are good solutions for use in identification friend or foe (IFF) systems or any other applications requiring rugged and robust filter designs in demanding...

LISTED UNDER: Filters, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading