Advertisement

Atmel and Tower Semiconductor Announce Joint CMOS Image Sensor Technology and Product Development Agreement

August 3, 2005 6:35 am | Wireless Design & Development | Product Releases | Comments

Atmel® Corporation and Tower Semiconductor Ltd. announce that they have agreed on a CMOS image sensor technology development partnership. Atmel and Tower will work together to design and develop process technology predominantly to be used in consumer products. Under the agreement, both companies have rights to use the jointly developed technology....

LISTED UNDER: Ceramics
Advertisement

Dielectric Materials

June 2, 2005 7:23 am | Product Releases | Comments

W. L. Gore introduces the MICROLAM® 630 dielectric, low-loss microvia material for high frequency microvia modules and PCBs. This high performance material consists of standard BT resin in a continuous toughening matrix. MICROLAM 630 dielectric provides good thickness uniformity for controlled impedance designs, CAF reliability, buried via filling capabilities and good surface planarization for high-density applications....

LISTED UNDER: Substrates

Multilayer Cofired Ceramic Design Guide

February 4, 2005 10:49 am | Wireless Design & Development | Product Releases | Comments

AdTech Ceramics has published a design guide for advanced electronic packages produced with co-fire multi-layer ceramic technology. Typical applications include multi-chip modules, microwave packages, high frequency feed-throughs, crystal packages, custom pin grid arrays, and ceramic/metal packages....

LISTED UNDER: Ceramics

Piezoelectric and Dielectric Ceramics

November 23, 2004 11:15 am | Wireless Design & Development | Product Releases | Comments

Morgan Electro Ceramics introduces its piezoelectric ceramic, PZT807 and dielectric ceramic, D34. The PZT807 offers high performance and superior power handling capabilities. It is suited for sensing technology and ultrasonic transmitter systems. The dielectric ceramic, D34, is suited for high-performance base station cavity filters in wireless and radio systems....

LISTED UNDER: Ceramics

Ceramic Technology

August 30, 2004 7:45 am | Wireless Design & Development | Product Releases | Comments

Murata announces Planar High-density Passive Device (PHPD) -- a technology that is suitable for low-height components. PHPD technology, which is realized by thin film printing on high Q ceramics, can be applied for components including filters, diplexers, baluns, couplers, impedance transformers, phase transformers, power combiners and dividers, directional power monitors, and mode transformers....

LISTED UNDER: Ceramics

Dielectric Ceramic Material

May 14, 2004 5:38 am | Wireless Design & Development | Product Releases | Comments

Designed to meet the needs of base station cavity filters, MEC's dielectric material is used in cellular infrastructure networks. This solution offers a dielectric constant of 35, and depending on the application, a Qo (unloaded) of greater than 40,000 (at 2 GHz), allowing the cavity filter size to be reduced while achieving low insertion loss.

LISTED UNDER: Ceramics

Epoxy Paste

April 29, 2004 10:06 am | Wireless Design & Development | Product Releases | Comments

Tra-Bond 816H02 from Tra-Con is a thixotropic (smooth paste) heat conductive epoxy system. It is used for stacking transistors, diodes, resistors, integrated circuits, and other heat-sensitive components to printed circuit boards. This two-part adhesive develops high-impact bonds at room temperature and create electrically insulating contacts....

LISTED UNDER: Ceramics

Broadband Capacitors

March 10, 2004 8:03 am | Wireless Design & Development | Product Releases | Comments

ATC introduces the 540L series ultra-broadband capacitor (UBC), a capacitor assembly that delivers performance from 16 kHz through 40 GHz. The 540L UBC is a match for ultra-broadband DC blocking, coupling, and bypassing in high-speed digital logic and optical data applications. It exhibits an insertion loss of less than 1 dB and a return loss of better than 15 dB....

LISTED UNDER: Ceramics

FPGA's Role in the Development of Small Synthetic Aperture Radars

March 5, 2004 9:09 am | Wireless Design & Development | Product Releases | Comments

The old adage "big things come in small packages" can accurately describe a Sandia National Laboratories effort to make synthetic aperture radars (SARs) smaller, lighter, and cheaper. By Dale Dubbert, George Sloan, and Armin Doerry The coherent nature of the SAR signal combined with sophisticated processing algorithms presents an opportunity to exploit techniques such as high-sensitivity change detection, ultra-precise 3D ter...

LISTED UNDER: Radar | Ceramics

Epoxy System

January 21, 2004 10:48 am | Wireless Design & Development | Product Releases | Comments

Tra-Bond 2254 is recommended for high temperature aerospace and electronics applications. Tra-Bond 2254 is a two-part thixotropic epoxy system that is color coded for easy handling and mixing at room temperature. This adhesive requires a heat cure, and bonds to ceramics, glass, metals and plastics....

LISTED UNDER: Ceramics

Adhesives Selector Guide

November 24, 2003 7:30 am | Wireless Design & Development | Product Releases | Comments

A selector guide from Dymax introduces a line of light and activator curing adhesives for bonding metal, ferrite, ceramics and providing strain relief for various wiring assemblies. Featured are the 800 series adhesives for "cold bonding" close fitting, opaque substrates such as magnets to steel housings....

LISTED UNDER: Ceramics

WLAN Front-end Modules

November 24, 2003 7:19 am | Wireless Design & Development | Product Releases | Comments

Skyworks' WLAN front-end module family supports the 802.11a, b and g wireless LAN standards both individually and in the combinations of 802.11b/g and 802.11a/b/g. The frequencies of operation include 2.4 to 2.5 GHz and 4.9 to 5.85 GHz and support complementary code keying (CCK) for 802.11b and orthogonal frequency division multiplexing (OFDM) for 802....

LISTED UNDER: Boards & Modules | Ceramics

Microwave Ceramics

November 3, 2003 6:54 am | Wireless Design & Development | Product Releases | Comments

Temex introduces a range of microwave ceramics dedicated to space applications. The E3000 range is designed to make complete oscillator assemblies stable throughout the environments experienced in space. The E3000 family is targeted at space and military applications requiring temperatures ranging from – 55°C to +125°C....

LISTED UNDER: Ceramics

Light Pipe Materials

October 28, 2003 10:16 am | Product Releases | Comments

BivarOpto introduces an optional, high-contrast material for their light pipe products family. Featuring the use of a 94V-O compliant polycarbonate compound from GE, the light pipes are white-defused in off-state appearance and take full color when in the on-state. The materials are available for the SLP, SP, VLPR and PLP series light pipes and the lens caps in the line of FLP series products....

LISTED UNDER: Substrates

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading