Advertisement
Interconnects

40GHz Edge Connector Enhances PCB Performance

March 17, 2015 2:33 pm | by RFMW, Ltd. | RFMW, Ltd. | Product Releases | Comments

RFMW, announces design and sales support for the Rosenberger 02K243-40ME3, 2.92 mm female, clamp-on, PCB edge launch connector. Perfect for prototyping or production design where frequencies up to 40 GHz are required, this Rosenberger connector is compatible with SMA and 3.5 mm connectors. The 02K243-40ME3 body is brass with gold over nickel plating and the center contact is beryllium copper ...

LISTED UNDER: Interconnect, Connectors

Durable Environmental Boots’ Shield Connectors

March 12, 2015 5:17 pm | by Anderson Power Products | Product Releases | Comments

Anderson Power Product (APP) now offers Environmental Boots to protect their dual pole SB® 50, SB® 120 and SB® 175 connectors from water, dirt, chemicals and UV. The IP64 rated, durable soft sided Environmental Boots’ shield the SB® connectors from water and dirt in both the mated and unmated condition. SB® connectors, with their mechanical ... 

LISTED UNDER: Interconnect, Connectors

Low Profile, LEK Series, Board-to-Board, LED Connectors

March 11, 2015 2:40 pm | by JST Corporation | Product Releases | Comments

The new LEK Series connectors recently introduced by JST Corporation, Waukegan, Illinois, provide a space saving and low profile connection for LED lighting and reliable contact construction for high density applications. Any misalignment between the horizontal connections between the PCBs is absorbed by the LEK plug and receptacle. The spring contact in the ... 

LISTED UNDER: Interconnect, Connectors
Advertisement

New High-Performance 27 GHz Bandwidth Socket

March 9, 2015 6:10 pm | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics has recently introduced a new high performance BGA socket for 1mm pitch, 2577 pin BGA IC's. The SG-BGA-6422 socket is designed for IC size - 52.5x52.5mm package size and operates at bandwidths up to 27 GHz with less than 1dB of insertion loss. The sockets are designed to dissipate up to several watts without extra heat sinking and can handle ... 

LISTED UNDER: Interconnect, Adapters

Pasternack’s Microwave & Millimeter Wave Right Angle RF Adapters

March 3, 2015 6:30 pm | by WDD Staff | Product Releases | Comments

Pasternack has expanded their lines of high frequency right angle RF adapters, which are widely used in the military and commercial markets for applications such as wireless communications, test labs, equipment racks and many other space-limited applications ...

LISTED UNDER: Interconnect, Adapters

75 GHz Clamshell BGA Socket with Heat Sink Lid

February 20, 2015 5:42 pm | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics has recently introduced a new BGA socket design using high performance elastomer capable of 75GHz, very low inductance and wide temperature applications. The GT-BGA-2019 socket is designed for 25x25 mm package size and operates at bandwidths up to 75GHz with less than 1dB of insertion loss. The socket is designed ... 

LISTED UNDER: Interconnect, Adapters

Therm-O-Flow Bulk Hot Melt System

February 19, 2015 5:25 pm | by Graco Inc. | Product Releases | Comments

Graco Advanced Fluid Dispense (AFD), a world leader in fluid handling products and systems, announces the Therm-O-Flow® Bulk Hot Melt System, an ideal fit for moisture block coating applications in the cable industry. With material throughput capability 200 percent greater than the leading competitor, Therm-O-Flow systems have been designed ...

LISTED UNDER: Interconnect, Connectors | Materials

QFN Socket Addresses High Performance Requirements for Testing QFN Device

February 4, 2015 1:13 pm | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics recently introduced a new QFN socket addressing high performance requirements for testing QFN devices - CBT-QFN-7039. The contactor is a stamped spring pin with 17 gram actuation force per ball and cycle life of 50,000 insertions. The self inductance of the contactor is 0.75 nH, insertion loss ... 

LISTED UNDER: Interconnect, Adapters
Advertisement

Ultra-Low Capacitance TVS Device Protects USB 3.0 Interface

January 22, 2015 12:39 pm | by Semtech | Product Releases | Comments

Semtech has announced the RClamp3346P, a high-performance, ultra-low capacitance transient voltage suppression (TVS) device to protect the USB 3.0 interface in computing and mobile devices from electrostatic discharge (ESD) events. The RClamp3346P supplements Semtech’s ...

LISTED UNDER: Interconnect, Cables | Interconnect, Connectors | Power

New Microwave/RF Online Resource: Cable Assembly Calculator

January 16, 2015 11:11 am | by W. L. Gore & Associates, Inc. | Product Releases | Comments

W. L. Gore & Associates (Landenberg, PA) has introduced an online tool designed to complement the existing GORE™ Microwave/RF Assembly Builder. The new GORE™ Microwave/RF Assembly Calculator is used to calculate insertion loss, VSWR and other parameters of GORE® Microwave/RF Assemblies for different ... 

LISTED UNDER: Interconnect, Cables

Stamped Spring Pin Socket Addresses Burn-In Test Requirements

January 15, 2015 12:26 pm | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics recently introduced a new Stamped spring pin socket addressing burn-in test requirements for testing 74 lead QFN - CBT-QFN-7038. The contactor used in CBT-QFN-7038 socket is a stamped spring pin with 15 gram actuation force per ball and cycle life of 10,000+ insertions. The self inductance ... 

LISTED UNDER: Interconnect, Adapters

30 GHz Bandwidth Socket for QFN34 Package

January 6, 2015 1:28 pm | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics has recently introduced a new high performance elastomer socket for 0.4mm pitch QFN package. The SG-MLF-7084 socket is designed for a 6mmx4.5mm package size and operates at bandwidths up to 30 GHz with less than 1dB of insertion loss (GSSG configuration). The contact resistance is typically ... 

LISTED UNDER: Interconnect, Adapters

New Times-Protect Protector-Connectors

December 17, 2014 1:54 pm | by WDD Staff | Product Releases | Comments

Times has added to its popular line of Times-Protect protector-connectors with the new LP-18-240 and LP-18-195 in-line broadband DC pass surge protector series to augment the existing LP-18-400 series ...                  

LISTED UNDER: Interconnect, Connectors

Self-Clinching Nuts and Studs for Automotive Applications

December 12, 2014 11:53 am | Product Releases | Comments

New PEM® self-clinching nuts and studs introduced for permanent installation into especially hard sheet materials deliver design and assembly benefits for automotive component attachment applications.  Both types (SH™ hard panel nuts and HFLH™ hard panel studs) are manufactured from hardened alloy steel to provide stronger thread ... 

LISTED UNDER: Interconnects

Protector-Connectors Boast In-Line Broadband DC Pass Surge Protector

December 12, 2014 11:33 am | by WDD Staff | Product Releases | Comments

Times has added to its popular line of Times-Protect® protector-connectors with the new LP-18-240 and LP-18-195 in-line broadband DC pass surge protector series to augment the existing LP-18-400 series.  All designs incorporate state-of-the-art lightning protection circuitry and the EZ Advantage™ -X series crimp style connector ... 

LISTED UNDER: Interconnects | Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading