Advertisement

Cables Available

April 6, 2001 5:21 am | Product Releases | Comments

Four new low cost midspan strip tools are now available from Times Microwave Systems for use with LMR® feeder cables sizes 600 through 1700. The GST-600A, 900A, 1200A and 1700A tools provide a quick and easy way to remove the outer polyethylene jacket on the LMR® feeder cables to prep the cables for attaching the ground kits....

LISTED UNDER: Interconnect, Cables

SMT Connectors

April 6, 2001 5:21 am | Product Releases | Comments

To compliment the existing range of Harwin's High Reliability sub-miniature "Datamate" connectors, a Male Crimp Series designed for cable-to-cable applications has been introduced. These dual row versions utilize the series' contact technology, providing signal transmission without loss of data, 3 amps per contact, shock, heat and vibration resistance, while providing additional strain relief with Friction or Locking Latches....

LISTED UNDER: Interconnect, Connectors

155 dBc Intermod Jumper Cables

March 2, 2001 7:56 am | Product Releases | Comments

Spinner North America's new Corrugated Jumper Cable assemblies feature – 155 dBc intermod and a VSWR of 1.07:1 @ 900 MHz. Operable to 2.4 GHz with standard and superflex 1/4, 3/8, and 1/2 diameter cables. IP-68 rated for outdoor use. Straight and right angle, silver plated "N" or 7-16 connectors offered, with soldered inner and outer conductors and injection molded boots....

LISTED UNDER: Interconnect, Cables
Advertisement

DC Power Jack Cable Assemblies

March 2, 2001 7:56 am | Product Releases | Comments

Shogyo has reduced the outside dimensions of the jack enclosures for its in-line molded DC Power Jack Cable Assemblies with Strain Reliefs. The new, slim profiles complements the strain reliefs in optimizing OEM design flexibility. The space saving jack enclosure is circular, with an outside diameter of 10 mm....

LISTED UNDER: Interconnect, Cables

UHF Male Crimp Connector For LMR-400 Cable1

March 2, 2001 5:45 am | Product Releases | Comments

Times Microwave Systems recently announced the availability of its EZ-400-UM non-solder 'EZ' install Type-UHF male connector. The EZ-400-UM connector eliminates the need to solder the center conductor and braid which can cause overheating and melting of the cable dielectric. The center conductor slides into a silver plated spring finger contact pin and the outer braid is attached with a crimp-style attachment ring using standard ....

LISTED UNDER: Interconnect, Cables

-155 dBc Intermod Jumper Cables

March 2, 2001 5:45 am | Product Releases | Comments

Spinner North America's new Corrugated Jumper Cable assemblies feature – 155 dBc intermod and a VSWR of 1.07:1 @ 900 MHz. Operable to 2.4 GHz with standard and superflex 1/4, 3/8, and 1/2 diameter cables. IP-68 rated for outdoor use. Straight and right angle, silver plated "N" or 7-16 connectors offered, with soldered inner and outer conductors and injection molded boots....

LISTED UNDER: Interconnect, Cables

Cable Assembly Application Notes

February 22, 2001 4:53 am | Product Releases | Comments

MICRO-COAX has released application notes on its UFA147B and UFA210B UTiFLEX® flexible microwave cable assemblies. The application notes focus on the cable assemblies' amplitude and phase stability versus temperatures ranging from – 50 ° C to 100 ° C. Designed with easy-to-reference charts, the application notes outline the cables' percentage change in insertion loss at various temperatures, as well as phase stability....

LISTED UNDER: Interconnect, Cables

Testmate Cable Assemblies

February 22, 2001 3:59 am | Product Releases | Comments

Times Microwave Systems has recently introduced its line of flexible 50 Ohm Testmate cable assemblies. Designed for operation up to 18 GHz or 40 GHz, Testmate cables have a proprietary triple shielding system and several designs feature interchangeable connector heads. Testmate cable assemblies have low attenuation, long term electrical stability and are ruggedized for daily dependability in a wide range of applications including site/field...

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test
Advertisement

Triaxial Connectors for Noise-Free Guarded Systems

February 22, 2001 3:59 am | Product Releases | Comments

Tru-Connector Corporations released a full line of triaxial connectors that are designed for applications requiring the removal of noise radiation or cross-talk and improvement of the signal-to-noise ratio over standard coaxial cabling systems. Tru-Connector Triax Connectors are designed for triaxial cables....

LISTED UNDER: Interconnect, Connectors

Coaxial Ribbon Cable Assemblies Available With RF Connectors

February 22, 2001 3:59 am | Product Releases | Comments

Tyco Electronics announced the availability of coaxial ribbon cable assemblies. Coaxial ribbon cable assemblies consist of individual coaxial cables encased in a PVC jacket making up a standard flat ribbon cable configuration. Each coaxial lead has a solid conductor and foil shield with a drain wire....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Cable Load Assemblies

February 22, 2001 3:59 am | Product Releases | Comments

KDI/Triangle Corp.'s "Resistor Products Group" offers a wide selection of "Cable Load Assemblies," made with a choice of either Beryllium Oxide (BeO) or Aluminum Nitride (AlN) resistive elements. CW Power Levels range from 50 to 250 watts. These competitivly priced devices can be factory tuned for a VSWR as low as 1:04:1....

LISTED UNDER: Interconnect, Cables

RF Cable Assemblies

February 22, 2001 3:59 am | Product Releases | Comments

RF and Microwave cable assemblies are available to accommodate flexible, conformable, and semi-rigid cable groups. Semi-automated cutting, stripping and forming equipment assure repeatable, precise dimensions from low to high volume requirements. Statistical process controls (SPC) utilizing a WinSPC system ensure all critical dimensions are met....

LISTED UNDER: Interconnect, Cables

Battery Adapter

February 21, 2001 9:09 am | Product Releases | Comments

iTECH (Intelligent Technologies LLC) announces the release of a "Type 3" battery adapter compatible with NiMH and lithium ion StarTac, StarTac Piggyback and Nextel i1000 batteries, designed to interface with the iTECH IQfive(r) battery maintenance systems. The adapter features a battery communication system that identifies battery chemistry and determines charge rates....

LISTED UNDER: Interconnect, Adapters | Power, Batteries | Power, Battery

Communications Cable Installation Tool

February 21, 2001 9:09 am | Product Releases | Comments

CableCaster is designed to significantly speed up the installation of lightweight communications cable through hard-to-reach spaces, such as suspended ceilings, rafters and sub-floors. It launches a dart up to 50 feet to the cable supply access point, pulling a durable monofilament line. The cable is attached to the dart, and pulled back with the CableCaster take-up reel....

LISTED UNDER: Interconnect, Cables

Minature Bulk Coax Cable

February 21, 2001 8:23 am | Product Releases | Comments

Semflex announces the SW060 double shielded 0.060 inch diameter, 50 ohm, flexible coaxial cable. The SW060 cable features typical attenuation of less than 55 dB per 100 feet at 2 GHz compared to 72.5 dB per 100 feet of M17/93-RG178 cable at the same frequency. The SW060 has a velocity of propagation of 74% and its maximum structural VSWR is 1....

LISTED UNDER: Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading