Advertisement

Battery Adapter Compatible With Lithium Ion

November 29, 2001 8:38 am | Product Releases | Comments

iTECH announces the release of a lithium ion battery adapter compatible with Motorola Saber MX1000, MX2000 and MX3000 radios (battery part number NTN8818A). This adapter design uses the radio bayonet-type interface and eliminates the need for multiple adapters to support multiple capacities. iTECH battery adapter part number BA6501 is compatible with the iTECH iQ five ® battery analyzer/conditioner with software version 9....

LISTED UNDER: Interconnect, Adapters | Power, Batteries | Power, Battery

Cable and Antenna Analyzers

November 29, 2001 8:38 am | Product Releases | Comments

Anristu introduces five new Site Master™ transmission line and antenna analyzers designed with a new configuration that makes it even easier to detect cable feedline and antenna system problems before they become costly, time-consuming system failures. The new models are equipped with new features that simplify measurements made by service providers, network operators, and contractors who install, deploy, maintain, and troubleshoot wire...

LISTED UNDER: Interconnect, Cables | Test and Measurement, Analyzers, Spectrum

Power Supply Connectors

November 12, 2001 3:34 am | Product Releases | Comments

Hirose has introduced the HR31 series of low-profile power supply connectors that are DeviceNet Compliant. Ideal for factory automation networks, HR31 connectors are supplied in five-positions, and in 5.08 mm pitch. The "through-hole" type headers are available in both straight and right-angle versions and contacts can be ordered with solder or gold plating; gold plating contacts increase mating/unmating cycles to 1000 times....

LISTED UNDER: Interconnect, Connectors
Advertisement

Tooling for Connectors

November 5, 2001 3:56 am | Product Releases | Comments

FCI has a dedicated division responsible for the design, development, production and service of sophisticated customer application machines and tooling. The division supports FCI's various connector products and systems. The machine range covers various applications including crimp, IDC, fiber optic connections, and press-fit tools to the most advanced fully automated press-fit connector insertion lines for backpanel assembly....

LISTED UNDER: Interconnect, Connectors

Intermod Jumper Cables

October 30, 2001 9:36 am | Product Releases | Comments

Spinner North America's new high performance Corrugated Jumper Cable assemblies feature – 155 dBc intermod and a VSWR of 1.07:1 @ 900MHz. Operable to 2.4 GHz with standard and superflex 1/4, 3/8 and 1/2 dia. cables. IP-68 rated for outdoor use. Straight and right angle, silver plated "N" or 7-16 connectors offered, with soldered inner and outer conductors and injection molded boots....

LISTED UNDER: Interconnect, Cables

Board To Board Connectors

October 30, 2001 8:03 am | Product Releases | Comments

The new Series JAV connectors from JST have small pitch — 0.4 mm (.016) — and a low mounting height of 1.5 mm (.059) making them ideal for super high density applications such as notebook PCs, LCD monitors, PDAs, and cellular phones. The Series JAV connectors are available in 22, 26, 30, and 40 contact positions in a dual row configuration and are offered in a stacking/parallel PCB mounting direction....

LISTED UNDER: Interconnect, Connectors

Reverse Polarity SMA Connectors

October 30, 2001 8:03 am | Product Releases | Comments

FCC Part 15.203 regulation requires a non-standard coaxial connector interface for application compliance. RF Connectors, a division of RF Industries, offers two new reverse polarity and metric thread series of BNC, N, TNC, SMB and SMA connectors and adapters. The RP-3000-1C is an SMA Male Reverse-Polarity crimp connector designed for use with RG-58/U, RG-141/U, LMR-195, Belden 7806A and Commscope WBC-195 coaxial cables....

LISTED UNDER: Interconnect, Connectors

Chip-Cap Filtered D-Sub Connectors

October 30, 2001 8:03 am | Product Releases | Comments

Spectrum Control introduced the new Series 100 Chip-Cap filtered connector product line. The Series 100 connector is designed as a low cost filtering method for the elimination of electromagnetic interference. These connectors incorporate chip capacitors surface mounted on an integrated PC board....

LISTED UNDER: Interconnect, Connectors
Advertisement

Snap-Action Switches

October 22, 2001 4:34 am | Product Releases | Comments

E-Switch announces the immediate availability of its new line of snap-action switches. The VM Series Snap-Action switch line from E-Switch features UL94VO switch housing and actuator button. With a variety of contact ratings in both silver and gold, the switches are available with nine different actuators, each with two operating force options....

LISTED UNDER: Switches, IC

Connectors for Repair Sites

September 28, 2001 10:41 am | Product Releases | Comments

Anderson Power Products (APP) introduces an innovation in connector installation for OEM repair sites and field service applications. APP's new Fuselok connector features a contact that contains pre-measured amounts of solder and flux to allow rapid, easy installation. The new connectors are available in 175 and 350 amp, 600 volts and has continuous AC and DC operation to fit cable sizes from 2 awg up to 4/0 wire sizes....

LISTED UNDER: Interconnect, Connectors

Chip-on-Board Filtered D-Sub Connectors

September 28, 2001 9:40 am | Product Releases | Comments

Spectrum Control introduces the Series 100 chip-on-board (COB) EMI filtered D-subminiature connector. The Series 100 connector is designed as a low-cost filtering method for the elimination of electromagnetic interference (EMI). The COB connector design incorporates chip capacitors surface mounted on an integrated PC board....

LISTED UNDER: Interconnect, Connectors

OEM Switches

September 28, 2001 9:40 am | Product Releases | Comments

Shogyo is now offering OEM designers and purchasers a wider variety of custom PCB, solder, and surface mount types switches than ever before, with lead times of less than thirty days on most orders over 1,000 units. Shogyo's switch selection now includes miniature toggle, subminiature toggle, sealed subminiature toggle, sealed surface mount toggle, miniature PC rocker paddle, subminiature rocker, sealed subminiature rocker, power rocker, ...

LISTED UNDER: Switches, IC

Board-to-Board Connectors

September 28, 2001 9:40 am | Product Releases | Comments

The new Series JAV connectors from JST feature 0.4 mm (.016) pitch and low mounting height, 1.5 mm (.059), making them ideal for super high density applications such as notebook PCs, LCD monitors, PDAs, and cellular phones. The Series JAV connectors are available in 22, 26, 30, and 40 contact positions in a dual row configuration and are offered in a stacking/parallel PCB mounting direction....

LISTED UNDER: Interconnect, Connectors

DRAM and SRAM Adapters

September 28, 2001 9:40 am | Product Releases | Comments

Accutek AccuAdapters integrate existing SMT devices into modules that become direct drop-in replacements for end-of-life monolithic or discrete DIP and ZIP ICs to eliminate the need for PC board retolling. Configurations include 1 MEG × 1, 4 MEG × 1, 256K × 4, and 1 MEG × 4 DRAM DIPs and ZIPs, a 64K × 4 DRAM DIP, and a 128K × 8 SRAM DIP with 0....

LISTED UNDER: Interconnect, Adapters

RF Cable Assembly

September 24, 2001 4:51 am | Product Releases | Comments

Semflex announced the availability of a new 6 page brochure featuring their custom RF cable assembly capability. The brochure offers a photographic tour of Semflex's state of the art engineering and manufacturing facilities, along with helpful information on how to quickly spec and order products for your applications....

LISTED UNDER: Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading