BMA Connectors

November 1, 2002 6:08 am | Product Releases | Comments

TRU BMA series connectors feature a high integrity push-on SMA interface that is suitable for dense modular connector arrays requiring fast and reliable connections. This line of high frequency BMA connectors has been expanded to fit many types of cables including semi-rigid sizes from .0865 inches to ....

LISTED UNDER: Interconnect, Connectors

Cable Assemblies and Adapters

September 27, 2002 7:43 am | Product Releases | Comments

     Microwave Distributors Company has published a 60 page catalog featuring an extensive line of standard flexible and semirigid cable assemblies, and coaxial adapters. Also included in this handy, desk size catalog are a few of MDC's other RF/Microwave components such as Isolators, Circulators, Detectors, Limiters, Attenuators, Terminations, and Phase Adjustable Adapters and Connectors....

LISTED UNDER: Interconnect, Adapters | Interconnect, Cables

Coaxial Connectors

September 27, 2002 7:01 am | Product Releases | Comments

The RFH series connectors are small and low profile MHF coaxial connectors with a mounting area of 3 × 3 mm on PCB and 2 mm height when mated. Designed for application operating from DC to 6 GHz, they are ideal for use in data and telecommunication hardware for PDAs, handsets, PCS, GPS, WLAN, WLL, and paging....

LISTED UNDER: Interconnect, Connectors

Adapter Set

September 27, 2002 6:44 am | Product Releases | Comments

The MDC02171 SMA Phase Equal Adapter Set consists of 3 SMA in-series adapters that have the same insertion electrical lengths. This allows them to be readily interchanged in test and measurement setups without significantly degrading system calibration. The kit includes a male to female adapter (MDC02171-1), a male to male adapter (MDC02171-2), and a female to female adapter (MDC02171-3)....

LISTED UNDER: Interconnect, Adapters

Front End Connectors

September 27, 2002 6:33 am | Product Releases | Comments

Times Microwave introduces its new stainless steel 716 DIN male and 716 DIN female replaceable front end connectors for use with its 50 Ohm Testmate™ cable product line. Designed for use up to PCS frequencies and higher, the new interchangeable connectors are suited to survive the rigors of service in all type of outdoor conditions....

LISTED UNDER: Interconnect, Connectors

Hitachi Cable Manchester, Inc.

September 11, 2002 5:44 am | Product Releases | Comments

Cable Catalog      Hitachi's new Electronics Cable catalog is now available online and on CD-ROM. Both the 72-page print edition and the electronic versions of the catalog are comprehensive, highlighting HCM's line of electronic cable and wire products for industrial, medical and high technology applications....

LISTED UNDER: Interconnect, Cables

Connectors and Adapters

September 11, 2002 5:38 am | Product Releases | Comments

The 1.85mm Connector was developed to go beyond the 2.4 mm connector's maximum performance. The 1.85mm Connector is threaded, (M 7.0 × .75-6G) with performance to 60 GHz, utilizing an air interface. Frequency is DC - 60 GHz. VSWR is 1.25: 1 maximum to 60 GHz. Return loss is 19 dB maximum to 60 GHz....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

Multi-Interface Connectors

September 11, 2002 5:17 am | Product Releases | Comments

     The 1.0/2.3 SMT compatible multi-interface connector series facilitates PCB assembly and also accommodates tight packaging density. These connectors are available with 2, 3, and 4 coax interface combinations in the same housing. Frequency coverage is from DC - 2 GHz with standard 75 ohm impedance value and DC - 10 GHz in optional 50 ohm impedance....

LISTED UNDER: Interconnect, Connectors

Reed Relay Switches

September 11, 2002 5:17 am | Product Releases | Comments

The MS series is available with up to 50 W contact rating and are capable of up to 1,000 V switching, with up to 3 AMP carry current. Featuring molded construction with an internal magnetic shield providing 10 13 Ohms typical insulation resistance, they are offered in 5 V and 12 V versions with optional external EMI shielding....


High Temperature Adapter

August 30, 2002 4:45 am | Product Releases | Comments

The MegaPhase® Type-N is an in-series female-to-female type-N adapter. It features an operating temperature through +300°C, low VSWR and insertion loss, and rugged construction for consistent electrical performance. The maximum operating frequency is 18 GHz depending on the interface. Insertion length is 2....

LISTED UNDER: Interconnect, Adapters

Blindmate SMA Adapter

August 6, 2002 10:26 am | Product Releases | Comments

Used in microwave applications the inline blindmate adapter, which mates with standard SMA, is designed for spring loaded mounting on racks. The blindmate adapters can be used in the test lab or within a system to enable quick connect/disconnect, more connections per area and alignment without sight....

LISTED UNDER: Interconnect, Adapters

Transmitters and Switches

August 1, 2002 11:07 am | Product Releases | Comments

The EVO Series transmitters and switches from Italcoppie are introduced from Instrumentation Group. The EVO Series of transmitters are compact and employ a one-way only, screw on, watertight connection that tightens by hand. The 4-20 mA output is factory programmed to customer specifications. EVO transmitters connect easily to Italcoppie PT100 sensors....


Snap-on Connectors

July 10, 2002 7:12 am | Product Releases | Comments

These 75 ohm Mini-SMB snap-on connectors deliver broadband performance with low reflection DC through 4 GHz in applications where weight and physical space is limited. Rated at 500 Vrms, – 65 to +165°C, these connectors are the same size as standard 50 ohm SMB connectors, but 35% smaller than standard 75 ohm SMB connectors....

LISTED UNDER: Interconnect, Connectors

Hermetically Sealed Connectors

July 10, 2002 7:12 am | Product Releases | Comments

These heretically sealed connectors are available in both circular and rectangular configurations, and across all product offerings, Micro D, D-Sub, Nano and special application connectors. Designed to protect against leakage that occurs in a variety of conditions, these connectors can provide protection through the bulkhead or chassis at the mounting interface, through the mating face in the unmated condition and through the master interfa...

LISTED UNDER: Interconnect, Connectors

Mini-USB Connectors

July 10, 2002 7:12 am | Product Releases | Comments

The mini-USB connectors are ideal for portable devices. The AB-type allows for both A- and B-type cables to be inserted and can be used in devices with both host and peripheral capabilities. The connectors are fully shielded and feature indentations for exceptional grounding and mating retention....

LISTED UNDER: Interconnect, Connectors


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.