Advertisement

Flame Retardant Interconnect Cable

May 6, 2002 7:16 am | Product Releases | Comments

Whitney Blake Company offers its new M.I.B. device interconnect cable for use in LDS settings and the health care industry. Each M.I.B. cable is pre-engineered with a polyurethane flame retardant jacket and meets IEEE 1073.4.1 standards. Whitney Blake's M.I.B. cable consists of six conductors: one 28 AWG twisted pair offering two data signal lines; a second 24 AWG twisted pair providing two power conductors; and two individual 28 AWG for un...

LISTED UNDER: Interconnect, Cables

AC Cable Port Connector

May 6, 2002 7:16 am | Product Releases | Comments

FCI's Communications, Data and Consumer (CDC) division, formerly Electronics, is pleased to announce the latest in its PwrBlade® family of products. The PwrBlade AC Cable Port Connector is a one-piece connector for AC (input) and DC (output). The connector is available in right angle and vertical receptacles....

LISTED UNDER: Interconnect, Cables

RF Coaxial N Adapters

May 6, 2002 7:16 am | Product Releases | Comments

Tru-Connector recently introduced a new series of precision N adapters that feature metrology-grade construction. Tru-Connector Precision N Adapters feature gold plated 303 stainless steel bodies, BeCu center conductors, Teflon® insulators, a swept center contact to assure low VSWR. When tested as mated pairs, they exhibit 1....

LISTED UNDER: Interconnect, Adapters
Advertisement

Panel Mount SMA Connectors

May 6, 2002 7:16 am | Product Releases | Comments

RF Connectors has released two new SMA panel mount connectors for use with frequencies up to 18 GHz. The RS-3232-1 is a SMA Male connector, and the RSA-3279-10 is a SMA female. Both are made of gold plated contacts and Teflon insulation. Both feature .500 square four-hole flanges with holes .339 on center....

LISTED UNDER: Interconnect, Connectors

Adapters and Cable Connectors

April 4, 2002 8:30 am | Product Releases | Comments

Less than two-thirds the size of the popular SMP, achieving reduced spacing as little as .130, Tensolite's SSMP fulfills the design demands of smaller, lighter systems. Additionally, the SSMP offers expanded operating frequencies to 60 GHz, while not sacrificing the ease of assembly of its SMP counterpart....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters | Interconnect, Cables

High Speed Serial Data Cable Assemblies

April 4, 2002 8:30 am | Product Releases | Comments

Circuit Assembly (CA) is launched its High Speed Serial Data cable assemblies, designed for high performance, mass storage applications. CA has designed its High Speed Serial Data cable assemblies to meet the stringent electrical requirements for crosstalk, skew, and signal integrity. This cable is typically used in copper implementation of Fibre Channel and other serial data applications that require extremely high data transfer rates over...

LISTED UNDER: Interconnect, Cables

RF Coaxial Cable Assemblies

April 4, 2002 8:30 am | Product Releases | Comments

Custom manufacture subminiature to high-power RF coaxial cable assemblies that can include virtually any combination of connectors and varying sizes are being offered by Tru-Connector Corporation of Peabody, Massachusetts. Tru-Connector Custom RF Coaxial Cable Assemblies can include flexible and semi-rigid types ranging from 0....

LISTED UNDER: Interconnect, Cables

Cylindrical Connectors

April 4, 2002 8:30 am | Product Releases | Comments

Amphenol Industrial Operations introduced its new AMPHE-LITE line of connectors. This new commercial series of the 38999-type connectors provides an interconnect solution for a variety of harsh environment commercial/industrial applications, including power, signal, and RF. Key design features include a positive shell-to-shell coupling design, grounding fingers and Electroless Nickel plating to provide EMI shielding capability....

LISTED UNDER: Interconnect, Connectors
Advertisement

Microwave Cables Provide High Shielding

April 4, 2002 8:30 am | Product Releases | Comments

Micro-Coax introduces the M-FLEX™ series of flexible microwave cable that provides good overall performance at higher frequencies. The durable M-FLEX cables offer improved loss and phase stability, making them well-suited for microwave signal transmission applications. Two M-Flex cable types are available, both of which have a maximum frequency of 18 GHz....

LISTED UNDER: Interconnect, Cables

Internal and External Cables

February 27, 2002 9:34 am | Product Releases | Comments

Hitachi Cable Manchester (HCM) announced its new SCSI NexZ 0 series of internal and external cables, which meet or exceed SCSI Ultra 320 specifications. The new SCSI NexZ 0 internal cable consists of flat, twisted pair cable, and the external round twisted pair cables are manufactured with shielded and unshielded variations....

LISTED UNDER: Interconnect, Cables

Increased line of Connectors and Adapters

February 21, 2002 5:15 am | Product Releases | Comments

RF Connectors has increased its line of connectors and adapters designed to meet FCC Part 15 regulations by incorporating reverse, or left-handed, threads. Standard coaxial connectors will not mate with these special connectors, the connector FCC Part 15 compliant. Because only the threads are modified, performance of these coaxial connectors is unchanged....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

Integrated V Connectors

February 11, 2002 3:57 am | Product Releases | Comments

Anritsu Company introduces a family of Integrated V Connectors® utilizing a design that incorporates the launcher and integrated glass bead in a single housing to produce significant improvements in efficiency and performance while also reducing design and manufacturing costs. Because of this design, the Integrated V Connectors feature excellent return loss and SWR so they are extremely well suited for use as the RF input in 40 Gpbs opti...

LISTED UNDER: Interconnect, Connectors

Power Supply and Compliant Connectors

February 4, 2002 3:31 am | Product Releases | Comments

Hirose has introduced the HR31 series of low-profile power supply connectors that are DeviceNet Compliant. Ideal for factory automation networks, HR31 connectors are supplied in five-positions, and in 5.08 mm pitch. The "through-hole" type headers are available in both straight and right-angle versions and contacts can be ordered with solder or grid plating; gold plating contacts increase mating/unmating cycles to 1000 times....

LISTED UNDER: Interconnect, Connectors

100 U Adapter

January 28, 2002 3:29 am | Product Releases | Comments

Providing Engineers And Buyers Involved In Designing OEM Electronic Equipment An Adapter With High Efficiency, Phihong Provides Its PSA100U Power Adapter. The Adapter's 85% Efficiency Is The Highest On The Market And Features A High Power Density At 100w Output. The PSA100U Weighs 0.62 Kg And Features Universal Ac Input And Worldwide EMC Compliance....

LISTED UNDER: Interconnect, Adapters

Military Cable

January 28, 2002 3:29 am | Product Releases | Comments

Whitney Blake's cutting-edge expertise in matching materials and performance requirements allowed them to create a technologically advanced set of cable assemblies which were developed in conjunction with a key military supplier that will serve a critical application in state-of-the-art military headset communications....

LISTED UNDER: Military-Aerospace | Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading