Advertisement

Reed Relay Switches

September 11, 2002 5:17 am | Product Releases | Comments

The MS series is available with up to 50 W contact rating and are capable of up to 1,000 V switching, with up to 3 AMP carry current. Featuring molded construction with an internal magnetic shield providing 10 13 Ohms typical insulation resistance, they are offered in 5 V and 12 V versions with optional external EMI shielding....

LISTED UNDER: Switches, IC

High Temperature Adapter

August 30, 2002 4:45 am | Product Releases | Comments

The MegaPhase® Type-N is an in-series female-to-female type-N adapter. It features an operating temperature through +300°C, low VSWR and insertion loss, and rugged construction for consistent electrical performance. The maximum operating frequency is 18 GHz depending on the interface. Insertion length is 2....

LISTED UNDER: Interconnect, Adapters

Blindmate SMA Adapter

August 6, 2002 10:26 am | Product Releases | Comments

Used in microwave applications the inline blindmate adapter, which mates with standard SMA, is designed for spring loaded mounting on racks. The blindmate adapters can be used in the test lab or within a system to enable quick connect/disconnect, more connections per area and alignment without sight....

LISTED UNDER: Interconnect, Adapters
Advertisement

Transmitters and Switches

August 1, 2002 11:07 am | Product Releases | Comments

The EVO Series transmitters and switches from Italcoppie are introduced from Instrumentation Group. The EVO Series of transmitters are compact and employ a one-way only, screw on, watertight connection that tightens by hand. The 4-20 mA output is factory programmed to customer specifications. EVO transmitters connect easily to Italcoppie PT100 sensors....

LISTED UNDER: Switches, IC

Snap-on Connectors

July 10, 2002 7:12 am | Product Releases | Comments

These 75 ohm Mini-SMB snap-on connectors deliver broadband performance with low reflection DC through 4 GHz in applications where weight and physical space is limited. Rated at 500 Vrms, – 65 to +165°C, these connectors are the same size as standard 50 ohm SMB connectors, but 35% smaller than standard 75 ohm SMB connectors....

LISTED UNDER: Interconnect, Connectors

Hermetically Sealed Connectors

July 10, 2002 7:12 am | Product Releases | Comments

These heretically sealed connectors are available in both circular and rectangular configurations, and across all product offerings, Micro D, D-Sub, Nano and special application connectors. Designed to protect against leakage that occurs in a variety of conditions, these connectors can provide protection through the bulkhead or chassis at the mounting interface, through the mating face in the unmated condition and through the master interfa...

LISTED UNDER: Interconnect, Connectors

Mini-USB Connectors

July 10, 2002 7:12 am | Product Releases | Comments

The mini-USB connectors are ideal for portable devices. The AB-type allows for both A- and B-type cables to be inserted and can be used in devices with both host and peripheral capabilities. The connectors are fully shielded and feature indentations for exceptional grounding and mating retention....

LISTED UNDER: Interconnect, Connectors

RF Coaxial Connectors

June 18, 2002 12:41 pm | Product Releases | Comments

SC coaxial connectors are similar to the "C" series bayonet types but are threaded to provide a secure coupling that cannot vibrate loose. Featuring a 5 kV version with overlapping Teflon® dielectrics for a longer electrical leakage path, these connectors can also be supplied in a 1 kV version with high temperature (+165°C) Fluoroloy® H dielectrics....

LISTED UNDER: Interconnect, Connectors
Advertisement

Analog Switches and Multiplexers

June 18, 2002 12:41 pm | Product Releases | Comments

The DG9400 series from Siliconix has low injection charges of 5 pC down to 1 pC. Speed and throughput with the devices are improved, with bandwidth up to 250 MHz. The devices in the series include the DG9411, DG9431 and DG9461 SPDT analog switches and two dual SPST analog switches (DG9232, DG9233), all rated for low voltage operation from 2....

LISTED UNDER: Switches, IC

High Frequency Switches

June 4, 2002 9:36 am | Product Releases | Comments

RLC introduced a new line of high frequency switches that are DC to 50 GHz. These switches are single-pole, double throw. Impedance is 50 ohms. Failsafe is 12 V DC at 250 mA nominal, 28 V DC at 140 mA nominal. Latching is 12 V DC at 120 mA nominal 28 V DC at 60 mA nominal. Connectors are 2.4 mm. Power Connectors are feed through solder lugs....

LISTED UNDER: Switches, IC

RF Connectors

June 4, 2002 7:48 am | Product Releases | Comments

Coaxial Connector Interface      The 1.0/2.3 coaxial connector interface is an effective way to save space in electronic assemblies. Designed per CECC 2230 and DIN47247, this connector series is ideal for telecommunications applications, especially in high speed switching equipment operating at frequencies up to 4 GHz....

LISTED UNDER: Interconnect, Connectors

Power Adapter

May 6, 2002 7:16 am | Product Releases | Comments

Giving designers of OEM electronic equipment a robust adapter for applications requiring more than 100 W of power, Phihong provides its PSA150U power adapter. The PSA150U power adapter delivers up to 100 W of power with increased reliability, stability and overall lifetime of the power supply. PSA150U adapter's universal AC input range eliminates switching needs, and the device carries worldwide EMC compliance....

LISTED UNDER: Interconnect, Adapters

Flexible Serial ATA Cable

May 6, 2002 7:16 am | Product Releases | Comments

Hitachi Cable Manchester (HCM) introduces its flexible Serial ATA cable. HCM's Serial ATA cable is built for Serial ATA drives and is designed to replace the current cables used with Ultra ATA 66 and 100 disk drive systems. The cable meets or exceeds all Serial ATA specifications. HCM's Serial ATA cable is available in 26 AWG and 30 AWG....

LISTED UNDER: Interconnect, Cables

Flame Retardant Interconnect Cable

May 6, 2002 7:16 am | Product Releases | Comments

Whitney Blake Company offers its new M.I.B. device interconnect cable for use in LDS settings and the health care industry. Each M.I.B. cable is pre-engineered with a polyurethane flame retardant jacket and meets IEEE 1073.4.1 standards. Whitney Blake's M.I.B. cable consists of six conductors: one 28 AWG twisted pair offering two data signal lines; a second 24 AWG twisted pair providing two power conductors; and two individual 28 AWG for un...

LISTED UNDER: Interconnect, Cables

AC Cable Port Connector

May 6, 2002 7:16 am | Product Releases | Comments

FCI's Communications, Data and Consumer (CDC) division, formerly Electronics, is pleased to announce the latest in its PwrBlade® family of products. The PwrBlade AC Cable Port Connector is a one-piece connector for AC (input) and DC (output). The connector is available in right angle and vertical receptacles....

LISTED UNDER: Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading