Advertisement

EMI Adapters

November 8, 2002 9:28 am | Product Releases | Comments

These fiber optic EMI shielding adapters increase shielding effectiveness to greater than 㫊 dB at 4 GH while enhancing front panel aesthetics. Two mounting orientations are available. The traditional straight orientation meets industry standard mounting dimensions. The 45° angled orientation allows for a lower cable exit profile with a unique cut-out for each adapter....

LISTED UNDER: Interconnect, Adapters

Millitary/Tactical Cable Brochure

November 1, 2002 6:57 am | Product Releases | Comments

The Military/Tactical Field Deployable Antenna Feeder Cables brochure covers 50 Ohm ruggedized, flexible cables. Both electrical and mechanical details are provided to aid the system designer in the selection of RF cables for applications required for multiple reeling, including military, security, and high reliability commercial applications....

LISTED UNDER: Interconnect, Cables

Switches and MOSFETs

November 1, 2002 6:09 am | Product Releases | Comments

The MIC94060 and MIC94061 are smart-load switches with on-resistance of 0.077 Ohm (typical) and 0.100 Ohm (maximum). These devices support 2 A of continuous current. Built-in level-shift circuitry allows a logic signal as low as 1.5 V to drive the high-side MOSFET, which may be tied to a different power rail, such as a 3....

LISTED UNDER: Switches, IC
Advertisement

Alternative to Semi Rigid Cable

November 1, 2002 6:09 am | Product Releases | Comments

The SM Series cable is a highly flexible product for use in applications from DC to 18 GHz. The series allows designers to bypass the step of fabricating 3-dimensional semi-rigid drawings, resulting in significant cost savings and faster time-to-market. The outer shield construction of the SM Series consists of a braided layer over a served foil, providing >100 dB of shielding....

LISTED UNDER: Interconnect, Cables

Blind-mate Connectors

November 1, 2002 6:09 am | Product Releases | Comments

The BMA to SSMP families of blind-mate connectors are mechanically robust and cover a large spectrum of sizes ranging from the size of an SMA to almost 70% smaller....

LISTED UNDER: Interconnect, Connectors

Multi-Port Connectors

November 1, 2002 6:08 am | Product Releases | Comments

Multi-Port connectors are single modules integrating several coaxial connectors with the same standard interface. They feature the same electrical and mechanical performance level as standard connectors and are intermateable with them....

LISTED UNDER: Interconnect, Connectors

Cable Sewing Needle

November 1, 2002 6:08 am | Product Releases | Comments

Junard introduces the JIC-287 metal cable sewing needle. Durable red anodized aluminum handle with curved notched cable sewing needle. Designed to harness or lace multiple lead bundles....

LISTED UNDER: Interconnect, Cables

BMA Connectors

November 1, 2002 6:08 am | Product Releases | Comments

TRU BMA series connectors feature a high integrity push-on SMA interface that is suitable for dense modular connector arrays requiring fast and reliable connections. This line of high frequency BMA connectors has been expanded to fit many types of cables including semi-rigid sizes from .0865 inches to ....

LISTED UNDER: Interconnect, Connectors
Advertisement

Cable Assemblies and Adapters

September 27, 2002 7:43 am | Product Releases | Comments

     Microwave Distributors Company has published a 60 page catalog featuring an extensive line of standard flexible and semirigid cable assemblies, and coaxial adapters. Also included in this handy, desk size catalog are a few of MDC's other RF/Microwave components such as Isolators, Circulators, Detectors, Limiters, Attenuators, Terminations, and Phase Adjustable Adapters and Connectors....

LISTED UNDER: Interconnect, Adapters | Interconnect, Cables

Coaxial Connectors

September 27, 2002 7:01 am | Product Releases | Comments

The RFH series connectors are small and low profile MHF coaxial connectors with a mounting area of 3 × 3 mm on PCB and 2 mm height when mated. Designed for application operating from DC to 6 GHz, they are ideal for use in data and telecommunication hardware for PDAs, handsets, PCS, GPS, WLAN, WLL, and paging....

LISTED UNDER: Interconnect, Connectors

Adapter Set

September 27, 2002 6:44 am | Product Releases | Comments

The MDC02171 SMA Phase Equal Adapter Set consists of 3 SMA in-series adapters that have the same insertion electrical lengths. This allows them to be readily interchanged in test and measurement setups without significantly degrading system calibration. The kit includes a male to female adapter (MDC02171-1), a male to male adapter (MDC02171-2), and a female to female adapter (MDC02171-3)....

LISTED UNDER: Interconnect, Adapters

Front End Connectors

September 27, 2002 6:33 am | Product Releases | Comments

Times Microwave introduces its new stainless steel 716 DIN male and 716 DIN female replaceable front end connectors for use with its 50 Ohm Testmate™ cable product line. Designed for use up to PCS frequencies and higher, the new interchangeable connectors are suited to survive the rigors of service in all type of outdoor conditions....

LISTED UNDER: Interconnect, Connectors

Hitachi Cable Manchester, Inc.

September 11, 2002 5:44 am | Product Releases | Comments

Cable Catalog      Hitachi's new Electronics Cable catalog is now available online and on CD-ROM. Both the 72-page print edition and the electronic versions of the catalog are comprehensive, highlighting HCM's line of electronic cable and wire products for industrial, medical and high technology applications....

LISTED UNDER: Interconnect, Cables

Connectors and Adapters

September 11, 2002 5:38 am | Product Releases | Comments

The 1.85mm Connector was developed to go beyond the 2.4 mm connector's maximum performance. The 1.85mm Connector is threaded, (M 7.0 × .75-6G) with performance to 60 GHz, utilizing an air interface. Frequency is DC - 60 GHz. VSWR is 1.25: 1 maximum to 60 GHz. Return loss is 19 dB maximum to 60 GHz....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters

Multi-Interface Connectors

September 11, 2002 5:17 am | Product Releases | Comments

     The 1.0/2.3 SMT compatible multi-interface connector series facilitates PCB assembly and also accommodates tight packaging density. These connectors are available with 2, 3, and 4 coax interface combinations in the same housing. Frequency coverage is from DC - 2 GHz with standard 75 ohm impedance value and DC - 10 GHz in optional 50 ohm impedance....

LISTED UNDER: Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading