Advertisement

Right Angle Connectors

May 30, 2003 11:38 am | Product Releases | Comments

The ERNI Group announces a 2 mm Hard Metric Right Angle Male Connector. The ERmet 2 mm HM connector is manufactured for gas-tight, pressfit installation into a PCB, and is designed to mate with 2 mm HM right angle or vertical female connectors. This connector is available in 5 rows, with or without an upper shield and available in A, B25, B22, B19, and C modules....

LISTED UNDER: Interconnect, Connectors

RF MEMS Switches

April 29, 2003 8:10 am | Product Releases | Comments

This device is an ultra low loss, DC to 6 GHz RF MEMS single pole, double-throw (SPDT) switch. Frequency response is 300 kHz RF to 6 GHz. It possesses a high linearity, IP3 >65 dBm. With insensitivity to magnetic fields, it exhibits a low loss of 0.1 dB at 900 MHz, 0.3 dB at 6 GHz. Teravicta and Dow-Key Microwave have teamed up to market and distribute this RF MEMS switch....

LISTED UNDER: Switches, IC

CMOS Switches

April 29, 2003 7:36 am | Product Releases | Comments

The ADG918 and ADG919 are wideband CMOS switches that provide high isolation and low insertion loss at frequencies exceeding 1 GHz. The ADG918 is an absorptive switch, while the ADG919 is a reflective (matched) switch. Both offer low power consumption (5 microamps), tiny package sizes, and CMOS-compatible single-pin cont4rol voltage levels....

LISTED UNDER: Switches, IC
Advertisement

ESD Protected Connectors

April 29, 2003 7:27 am | Product Releases | Comments

Spectrum Control Series E connectors are capable of providing ESD/EFT and EMI protection all in one package, removing ground traces from the board and offering protection at the I/O ports and to all lines. The metallic front shell also provides low ground impedance. These connectors free up real estate by reducing the number of components necessary to protect circuits from ESD/EFT/EMI....

LISTED UNDER: Interconnect, Connectors

Test Cable

April 29, 2003 7:27 am | Product Releases | Comments

The MegaPhase® SuperFlex™ 26.5 GHz test temperature stable cable is phase and amplitude stable with temperature stability of < 7 ppm per °C from – 40° to +125°C. Operating temperature range is – 70° to +121°C. The phase and amplitude change versus flexure, measured for a 360° wrap around a 4....

LISTED UNDER: Interconnect, Cables | Services, Calibration / Test

SMT Cable Connector

April 29, 2003 7:27 am | Product Releases | Comments

The ERNI Group introduces a connector in SMT technology with a 1.27 mm pitch to provide a reliable connection from the board to external cables. The connector enables the connection between a PCB and an IDC ribbon cable with one component. The ribbon cable is easy to assemble with application tools developed for this purpose....

LISTED UNDER: Interconnect, Cables

USB Connectors

April 29, 2003 7:27 am | Product Releases | Comments

The Mini USB Connector Series is designed for applications that require a high-speed data transfer interface in a compact package. The series consists of Type A, B, and AB connectors. The Mini USB connectors are shielded for EMI protection, polarized to prevent mis-mating, and rated for 5000 mating cycles....

LISTED UNDER: Interconnect, Connectors

Cables and Connectors

April 3, 2003 8:15 am | Product Releases | Comments

The Serial ATA, a miniaturized version of the Parallel ATA but with double its data transfer capability is now available. With a transfer speed of 150 MB/sec. And a 7-pin interface, the Serial ATA will foster development of smaller packages with improved airflow. It will allow the use of 12 V, 3 V, and 3....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables
Advertisement

Double Shielded Cable

March 28, 2003 9:42 am | Product Releases | Comments

The LA Series is a low loss double shielded cable that provides low attenuation and excellent phase stability and mechanical performance. It is ideal for applications up to 18 GHz requiring low loss performance and longer cable length interconnects, such as telecom and mil/aero. The LA Series uses silver plated inner and outer conductors for excellent attenuation performance....

LISTED UNDER: Interconnect, Cables

D-SUB Connectors

March 28, 2003 9:42 am | Product Releases | Comments

Shogyo D-SUB connectors are available with conductors ranging from 9 - 37 pins; steel-tin-plated or zinc-plated shells; pin contacts of brass, high-retention phosphorous-bronze or gold-plated nickel; plastic or metal hoods; in right angle and vertical mount. Features include: current ratings from 1 - 5 amps with dielectric strength of 1,000 V for 1 minute; insulator resistance rated at 1,000 M Ohms minimum at 500 V DC; temperature resistanc...

LISTED UNDER: Interconnect, Connectors

Coaxial Cable Assemblies

March 28, 2003 3:52 am | Product Releases | Comments

Times Microwave announces flexible, low loss coaxial cable assemblies with low levels of Passive Intermodulation Distortion or PIM. These assemblies are built from T-COM® cable and precision connectors. The construction of T-COM cable provides both low loss and excellent flex life and provides low PIM even when the cable is flexed....

LISTED UNDER: Interconnect, Cables

Shielded Cables

March 28, 2003 3:51 am | Product Releases | Comments

These audio snake cables are for use in broadcast and high end audio applications requiring a plenum rated cable. Part number SN1624PL consists of 16 individually shielded and jacketed pairs with an overall jacket. The digital versions (24XPL Series) are also available in constructions of 2 - 24 pair with color coded conductors and no inner jackets....

LISTED UNDER: Interconnect, Cables

Cost-Effective Cables

March 28, 2003 3:51 am | Product Releases | Comments

The BPE Series is designed for 50 ohm applications up to 6 GHz where microwave performance characteristics need to be managed but temperature range and higher frequency performance of PTFE dielectric is not required. Available in a full range of sizes from 0.100 inches to 0.600 inches, BPE cable is ideal for antenna feeds over short distances....

LISTED UNDER: Interconnect, Cables

I/O Adapter

March 12, 2003 4:54 am | Product Releases | Comments

Sealevel Systems announces the ULTRA COMM+8.LPCI, an eight-port, low profile PCI bus serial I/O adapter that offers high serial port count in a low profile format. It provides eight RS-232 ports, allowing connection to PLC's, bar code readers, scales and other data acquisition/control devices. The low profile form factor is useful in applications where space is at a premium such as 1U servers, thin clients, and net appliance applications....

LISTED UNDER: Interconnect, Adapters

Cables and Assemblies Brochure

February 25, 2003 12:14 pm | Product Releases | Comments

Times Microwave has updated its High Power RF Coaxial Cable & Assemblies brochure covering 50 Ohm flexible cables for use in high power applications such as high power radar, pulse power, medical, semiconductor manufacturing, laser and particle physics. Cables are available for use in continuous operating temperatures up to 250°C....

LISTED UNDER: Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading