Advertisement

Analog Switches and Multiplexers

June 18, 2002 12:41 pm | Product Releases | Comments

The DG9400 series from Siliconix has low injection charges of 5 pC down to 1 pC. Speed and throughput with the devices are improved, with bandwidth up to 250 MHz. The devices in the series include the DG9411, DG9431 and DG9461 SPDT analog switches and two dual SPST analog switches (DG9232, DG9233), all rated for low voltage operation from 2....

LISTED UNDER: Switches, IC
Advertisement

High Frequency Switches

June 4, 2002 9:36 am | Product Releases | Comments

RLC introduced a new line of high frequency switches that are DC to 50 GHz. These switches are single-pole, double throw. Impedance is 50 ohms. Failsafe is 12 V DC at 250 mA nominal, 28 V DC at 140 mA nominal. Latching is 12 V DC at 120 mA nominal 28 V DC at 60 mA nominal. Connectors are 2.4 mm. Power Connectors are feed through solder lugs....

LISTED UNDER: Switches, IC

RF Connectors

June 4, 2002 7:48 am | Product Releases | Comments

Coaxial Connector Interface      The 1.0/2.3 coaxial connector interface is an effective way to save space in electronic assemblies. Designed per CECC 2230 and DIN47247, this connector series is ideal for telecommunications applications, especially in high speed switching equipment operating at frequencies up to 4 GHz....

LISTED UNDER: Interconnect, Connectors

Flexible Serial ATA Cable

May 6, 2002 7:16 am | Product Releases | Comments

Hitachi Cable Manchester (HCM) introduces its flexible Serial ATA cable. HCM's Serial ATA cable is built for Serial ATA drives and is designed to replace the current cables used with Ultra ATA 66 and 100 disk drive systems. The cable meets or exceeds all Serial ATA specifications. HCM's Serial ATA cable is available in 26 AWG and 30 AWG....

LISTED UNDER: Interconnect, Cables

Power Adapter

May 6, 2002 7:16 am | Product Releases | Comments

Giving designers of OEM electronic equipment a robust adapter for applications requiring more than 100 W of power, Phihong provides its PSA150U power adapter. The PSA150U power adapter delivers up to 100 W of power with increased reliability, stability and overall lifetime of the power supply. PSA150U adapter's universal AC input range eliminates switching needs, and the device carries worldwide EMC compliance....

LISTED UNDER: Interconnect, Adapters

Flame Retardant Interconnect Cable

May 6, 2002 7:16 am | Product Releases | Comments

Whitney Blake Company offers its new M.I.B. device interconnect cable for use in LDS settings and the health care industry. Each M.I.B. cable is pre-engineered with a polyurethane flame retardant jacket and meets IEEE 1073.4.1 standards. Whitney Blake's M.I.B. cable consists of six conductors: one 28 AWG twisted pair offering two data signal lines; a second 24 AWG twisted pair providing two power conductors; and two individual 28 AWG for un...

LISTED UNDER: Interconnect, Cables

AC Cable Port Connector

May 6, 2002 7:16 am | Product Releases | Comments

FCI's Communications, Data and Consumer (CDC) division, formerly Electronics, is pleased to announce the latest in its PwrBlade® family of products. The PwrBlade AC Cable Port Connector is a one-piece connector for AC (input) and DC (output). The connector is available in right angle and vertical receptacles....

LISTED UNDER: Interconnect, Cables

RF Coaxial N Adapters

May 6, 2002 7:16 am | Product Releases | Comments

Tru-Connector recently introduced a new series of precision N adapters that feature metrology-grade construction. Tru-Connector Precision N Adapters feature gold plated 303 stainless steel bodies, BeCu center conductors, Teflon® insulators, a swept center contact to assure low VSWR. When tested as mated pairs, they exhibit 1....

LISTED UNDER: Interconnect, Adapters

Panel Mount SMA Connectors

May 6, 2002 7:16 am | Product Releases | Comments

RF Connectors has released two new SMA panel mount connectors for use with frequencies up to 18 GHz. The RS-3232-1 is a SMA Male connector, and the RSA-3279-10 is a SMA female. Both are made of gold plated contacts and Teflon insulation. Both feature .500 square four-hole flanges with holes .339 on center....

LISTED UNDER: Interconnect, Connectors

Adapters and Cable Connectors

April 4, 2002 8:30 am | Product Releases | Comments

Less than two-thirds the size of the popular SMP, achieving reduced spacing as little as .130, Tensolite's SSMP fulfills the design demands of smaller, lighter systems. Additionally, the SSMP offers expanded operating frequencies to 60 GHz, while not sacrificing the ease of assembly of its SMP counterpart....

LISTED UNDER: Interconnect, Connectors | Interconnect, Adapters | Interconnect, Cables

High Speed Serial Data Cable Assemblies

April 4, 2002 8:30 am | Product Releases | Comments

Circuit Assembly (CA) is launched its High Speed Serial Data cable assemblies, designed for high performance, mass storage applications. CA has designed its High Speed Serial Data cable assemblies to meet the stringent electrical requirements for crosstalk, skew, and signal integrity. This cable is typically used in copper implementation of Fibre Channel and other serial data applications that require extremely high data transfer rates over...

LISTED UNDER: Interconnect, Cables

RF Coaxial Cable Assemblies

April 4, 2002 8:30 am | Product Releases | Comments

Custom manufacture subminiature to high-power RF coaxial cable assemblies that can include virtually any combination of connectors and varying sizes are being offered by Tru-Connector Corporation of Peabody, Massachusetts. Tru-Connector Custom RF Coaxial Cable Assemblies can include flexible and semi-rigid types ranging from 0....

LISTED UNDER: Interconnect, Cables

Cylindrical Connectors

April 4, 2002 8:30 am | Product Releases | Comments

Amphenol Industrial Operations introduced its new AMPHE-LITE line of connectors. This new commercial series of the 38999-type connectors provides an interconnect solution for a variety of harsh environment commercial/industrial applications, including power, signal, and RF. Key design features include a positive shell-to-shell coupling design, grounding fingers and Electroless Nickel plating to provide EMI shielding capability....

LISTED UNDER: Interconnect, Connectors

Microwave Cables Provide High Shielding

April 4, 2002 8:30 am | Product Releases | Comments

Micro-Coax introduces the M-FLEX™ series of flexible microwave cable that provides good overall performance at higher frequencies. The durable M-FLEX cables offer improved loss and phase stability, making them well-suited for microwave signal transmission applications. Two M-Flex cable types are available, both of which have a maximum frequency of 18 GHz....

LISTED UNDER: Interconnect, Cables

Internal and External Cables

February 27, 2002 9:34 am | Product Releases | Comments

Hitachi Cable Manchester (HCM) announced its new SCSI NexZ 0 series of internal and external cables, which meet or exceed SCSI Ultra 320 specifications. The new SCSI NexZ 0 internal cable consists of flat, twisted pair cable, and the external round twisted pair cables are manufactured with shielded and unshielded variations....

LISTED UNDER: Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading