Advertisement

Protected-Power Distribution Switches

April 7, 2004 11:03 am | Product Releases | Comments

Two power control solutions for stationary and portable electronic systems such as PCs, servers, laptops, and protected battery packs are introduced by Micrel Semiconductor. Power-switching solutions handling currents in excess of 3 A requires the use of external power FETs. The MIC2044/45 changes that by integrating an NMOS pass element with control circuitry into a TSSOP package to control load currents in excess of 6 A....

LISTED UNDER: Switches, IC
Advertisement

Cable Assembly

March 15, 2004 9:53 am | Product Releases | Comments

Gore announces a cable assembly for the ZD backplane interface. The GORE EYE OPENER® ZD cable assembly uses ePTFE as the dielectric core for the digital interconnect cable. The helically wrapped core ensures controlled electrical properties throughout the signal path. Its smaller diameter and minimum bend radius, combined with the low dielectric constant materials, allows more signal lines per area....

LISTED UNDER: Interconnect, Cables

WLAN Antenna Switches

March 15, 2004 9:53 am | Product Releases | Comments

Toshiba introduces two new antenna switches that combine low insertion loss and low voltage operation with small UF6 or TU6 packages. The TG2216TU and TG2211FT are single pole, double throw switches that are suitable for use with antennas in WLAN applications. The TG2211FT is a 2.4 GHz antenna switch, while the TG2216TU is optimized for medium power applications....

LISTED UNDER: Switches, IC

Surface Mount Reed Switches

March 15, 2004 9:53 am | Product Releases | Comments

Coto Technology introduces three additions to its line of surface mount reed switches. The RI-80, miniature SMT switches, with 5 mm max glass length, feature a wide flat lead design to provide both stability during component placement and improved solderability for surface mounted applications. The RI-80SMD is Coto's smallest SMT switch; it is available in three different Gull or "J" lead configurations....

LISTED UNDER: Switches, IC

Hazardous Location Electrical Connectors

March 15, 2004 9:53 am | Product Releases | Comments

Amphenol announces that its Star-Line EX series of electrical connectors has completed ATEX update testing for use in hazardous environments, as defined by the NEC, Article 505. The connectors provide safe interconnections to modular equipment, making them suitable for applications such as onshore and offshore oil drilling, petrochemical refineries, aircraft re-fueling stations, paint spray booth, and other manufacturing and production envi...

LISTED UNDER: Interconnect, Connectors

15% Price Reduction on Vacuum Reed Switches

February 2, 2004 8:06 am | Product Releases | Comments

Hermetic Switch announces a 15% reduction on the price of its high voltage line of vacuum reed switches. Improved manufacturing processes that result in greater throughput enable the company to pass the savings on to its customers. The price reduction applies to models HSR-V7K, HSR-V10K, and HSR-V15K....

LISTED UNDER: Switches, IC

Universal Adapter Kit Available in Expansion Kit Format

February 2, 2004 8:06 am | Product Releases | Comments

With the evolution of wireless, broadband, IEEE 802.11a,b,g Wi-Fi, WLAN, and new telecomm solutions, the need for new coaxial interfaces has spurred the development of MCX, MMCX, SMB, 7-16 DIN, reverse polarity SMA and reverse polarity TNC Unidapt® Adapters. They join the BNC, TNC, N, SMA, UHF, and mini-UHF adapters already in the product line....

LISTED UNDER: Interconnect, Adapters

USB Switches

January 21, 2004 10:48 am | Product Releases | Comments

California Micro Devices announced three USB overcurrent protection switches. The CM3511/12/13 USB overcurrent switches support four USB ports in a single device. This allows next-generation PCs, which will have up to 8 ports per desktop, or 3 to 4 USB ports per notebook, to reduce the number of overcurrent protection devices per system by 50% vs....

LISTED UNDER: Switches, IC

SMA Connectors

January 21, 2004 10:48 am | Product Releases | Comments

Compel announces the availability of their press-in SMA connector series. Operating from DC to 18 GHz, the line offers typical insertion loss of < 0.06 dB and VSWR of < 1.15:1 with 50 Ω impedance. RF leakage runs typically measures < 90dB. Brass or stainless steel housings are available with gold or passivate plating options....

LISTED UNDER: Interconnect, Connectors

Cable Connectors

January 21, 2004 10:48 am | Product Releases | Comments

Tyco Electronics announces a cable connector product extension to the MULTI-BEAM XL line of modular Power/Signal connectors. The cable mount connector terminates up to 8 AWG, 600 V wire, carries up to 55 Amps on a single contact and satisfies Hot-Swap and Cable I/O applications. The MULTI-BEAM XL cable connector is available in two versions....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Coaxial Switches

January 21, 2004 10:48 am | Product Releases | Comments

RLC Electronics' terminated single pole, two position coaxial switch line provides reliability and long life. This switch features low insertion loss and VSWR over the DC to 40 GHz range while maintaining high isolation. Power rating RF cold switching is 2 watts average. Impedance is 50 Ω....

LISTED UNDER: Switches, IC

BNC Connectors

January 21, 2004 10:48 am | Product Releases | Comments

Nemal introduces a series of 75 Ω BNC connectors. the NE8000 series includes models for 75 Ω cables, all using industry standard crimping tools. Construction is user friendly, both in terms of installation and mating. Each connector package contains appropriate cable information as well as a diagram of strip dimensions....

LISTED UNDER: Interconnect, Connectors

Stacking Connectors

November 24, 2003 7:39 am | Product Releases | Comments

AVX introduces the MMA SMT board stacking connector, designed to maximize high speed signal integrity and high pin count SMT capabilities. The MMA system features dual active cantilever spring contacts that deliver lower insertion/withdrawal forces without jeopardizing normal forces needed for a reliable connection.

LISTED UNDER: Interconnect, Connectors

Test Adapters

November 24, 2003 7:39 am | Product Releases | Comments

Connectronics introduces a line of "Quick Release" test adapters. These adapters incorporate push-on mating with integrated locking mechanism to prevent mated surfaces from separating due to cable weight and handling. The locking out contacts are heat-treated beryllium copper and the quick-release sleeves are passivated stainless steel for strength and durability to handle multiple matings.

LISTED UNDER: Interconnect, Adapters | Services, Calibration / Test

Connectors and Cable Assemblies Catalog

November 24, 2003 7:30 am | Product Releases | Comments

Connectronics introduces a four-color reference guide describing the company's coaxial connectors and cable assemblies. Included are lines of standard and special connectors for use on coaxial, twinaxial and triaxial cables. This Quick Reference Guide provides important data about the products. Each product family appears with a photo and a description of the product specifications....

LISTED UNDER: Interconnect, Connectors | Interconnect, Cables

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading