Advertisement

Addition of High Flex Round Cable

November 15, 2007 7:48 am | Product Releases | Comments

W. L. Gore & Associates has added high flex round cable to its online design tool. --> W. L. Gore & Associates has added high flex round cable to its online design tool. The addition of round cable gives equipment designers even more standard cable solutions from Gore. When demand is uncertain or small order quantities are needed, Gore has cable for applications that demand flex life reliability....

LISTED UNDER: Interconnect, Cables

Jacketed Hand Formable Cables

November 8, 2007 7:41 am | Product Releases | Comments

RFMW annouces YouForm™ high quality, low cost jacketed hand-formable cables featuring stainless steel SMA plugs on each end are now available in straight and right angle configurations. VSWR tested 1.35 to 1 at 18 GHz for SMA straight connectors and 1.35 to 1 at 12.4 GHz for SMA right angle....

LISTED UNDER: Interconnect, Cables

HDMI Cables for Home Theater Applications

October 17, 2007 6:36 am | Product Releases | Comments

Belden announces its high definition multimedia interface (HDMI) cables to enhance the home theater experience. The HDMI shielded twisted pair cables provide an interface between any compatible digital audio/video source and a compatible digital audio and/or video monitor in the home theater set-up, as well as providing support for standard, enhanced or high-definition video and multi-channel digital audio, all on a single assembly....

LISTED UNDER: Interconnect, Cables
Advertisement

PIN Switches with Integral TTL Drivers

September 26, 2007 8:17 am | Product Releases | Comments

Link Microtek introduces a range of high-performance miniature PIN switches in small package size and integral TTL drivers, making them suitable for use in applications where space is restricted. The SM-DHS series PIN switches are supplied in hermetically sealed packages, and they are aimed at the military, aerospace and telecomm sectors....

LISTED UNDER: Switches, IC

SMA Bulkhead Connectors for OEM Applications

September 26, 2007 8:17 am | Product Releases | Comments

RF Connectors offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel or gold plating....

LISTED UNDER: Interconnect, Connectors

Plastic Circular Connectors Meet Demanding Medical Device Requirements

September 25, 2007 11:26 am | Product Releases | Comments

Hypertronics Corporation has expanded their patent pending HyperGrip product line. The product line now offers more configurations, including connectors with 20 (HG3), 34 (HG4), or 85 (HG6) pin positions to complement the growing 12-pin position connector (HG2). Designed specifically for the medical industry, HyperGrip is a user-configurable circular connector which is color-coded and customer key-able for accurate and quick connections on ...

LISTED UNDER: Medical | Interconnect, Connectors

Male to Female Adapter

August 10, 2007 11:58 am | Product Releases | Comments

BroadWave Technologies develops a SMA female to FAKRA SMB male adapter that easily mates to FAKRA SMB female connectors. Model 412-491-315 flawlessly interconnects within the embedded plastic housing of standard FAKRA connectors. These units are suitable for automotive test applications particularly satellite radio, GPS and vehicular internet access....

LISTED UNDER: Interconnect, Adapters

SMA Flange Mount Connectors

July 18, 2007 11:52 am | Product Releases | Comments

RF Connectors, division of RF Industries, offers a variety of SMA flange mount connectors for use in OEM applications. The connectors feature solder post and solder cup electrical termination. Male and female connector interfaces are available. All flanges are standard .500 inch (12.7mm) square with ....

LISTED UNDER: Interconnect, Connectors
Advertisement

Low Profile SMD Switches

July 18, 2007 11:52 am | Product Releases | Comments

Omron Electronic Components LLC announces the availability of the D3SH series of ultra-small size, low profile SMD switches. Measuring 3.4D × 3.0W × 0.9H mm and weighing 0.02g, the switch is utilized in presence/absence applications to detect location with an on-off signal. A unique mechanism enables high contact reliability and precision operation....

LISTED UNDER: Switches, IC

Radiating Cable Antennas

July 17, 2007 9:06 am | Product Releases | Comments

Tyco Electronics announces a line of M/A-COM radiating cable antennas, which is designed to replace conventional antennas in applications that require wide frequency bandwidths and deployment in physical spaces that present extreme challenges to traditional antenna solutions. The M/A-COM radiating cable antenna series is suitable for cellular, Bluetooth and WLAN frequency band installations, as well as airborne, vehicular and ground-based a...

LISTED UNDER: Interconnect, Cables

Card Connectors and Cover Sets

July 17, 2007 9:06 am | Product Releases | Comments

ITT Electronic Components introduces Cannon Express Card 26 pin- edge card connectors and cover sets that meet the PCMCIA industry’s demands for 34 mm and 54 mm wide modules. Stainless steel cover sets assemble easily and they can either be snapped together or ultrasonically welded. With a universal slot design with module formats measuring 5 mm deep by 75 mm long, the connectors and cover sets enable both compact ExpressCard/34 and /54 car...

LISTED UNDER: Interconnect, Connectors

Socket Adapter Systems

April 17, 2007 7:24 am | Product Releases | Comments

BGA Socket Adapter Systems from Advanced Interconnections Corp. solve reflow temperature mismatch issues when using lead-free devices on existing boards with standard solder profiles. When device packages are transitioned to lead-free, OEMs with RoHS Exempt products must change board soldering profiles and re-qualify existing components just to accommodate the higher processing temperatures required for proper lead-free device attach....

LISTED UNDER: Interconnect, Adapters

RoHS-Compliant SSOP Adapters

March 13, 2007 12:50 pm | Product Releases | Comments

Aries Electronics introduces an RoHS-compliant version of its SOWIC-to-DIP Correct-A-Chip™ adapter that can be used for prototyping and testing SSOP ICs. This adapter allows the use of 0.65 mm pitch surface mount ICs in thru-hold designs, and it can be cut to smaller sizes by the end user....

LISTED UNDER: Interconnect, Adapters

Hybrid Socket Adapter

March 13, 2007 12:50 pm | Product Releases | Comments

Advanced Interconnections Corp. announces its hybrid socket adapter design that uses both male and female pins in an interstitial pattern in 0.65 mm pitch BGA and LGA footprints. The patented design features the reliability of screw-machined terminals with multi-finger contacts in a compact SMT socket....

LISTED UNDER: Interconnect, Adapters

Card-Edge Connectors

March 13, 2007 12:50 pm | Product Releases | Comments

FCI develops press-fit, card-edge connectors to enable the implementation of MicroTCA™ (mTCA) architecture. These vertical card-edge connectors provide 170 contacts on 0.75 mm pitch, and they enable AMCTM cards to be plugged directly to a backplane, accommodating speeds up to 10 Gb/s. The press-fit version of the connectors extends the use of MicroTCA architecture to thicker backplanes where the size and complexity of the backplane is n...

LISTED UNDER: Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading