Subminiature Connectors
May 30, 2003 11:38 am | Product Releases | Comments...
LISTED UNDER: Interconnect, ConnectorsLoad Switches
May 30, 2003 11:38 am | Product Releases | CommentsSiliconix incorporated, a subsidiary of Vishay, announced a family of TrenchFET power MOSFETs build on P-channel technology. The family of devices can be used as load switches and help to reduce power consumption and the board area required for power components in cell phones, PDAs, and other compact, battery-operated products....
LISTED UNDER: Switches, ICAntenna Feeder Cable Assemblies
May 30, 2003 11:38 am | Product Releases | CommentsTimes Microwave Systems announces a range of antenna cable assemblies for Cisco/Aironet WLAN bridges and access points. Times has optimized the reverse polarity TNC connectors used on these assemblies to provide low VSWR in both the 2.4 (802.11b) and 5.8 GHZ (802.11a) band for high data rates. These assemblies are available in stand LMR® construction for outdoor application as well as other cable constructions for other installing enviro...
LISTED UNDER: Interconnect, CablesRight Angle Connectors
May 30, 2003 11:38 am | Product Releases | CommentsThe ERNI Group announces a 2 mm Hard Metric Right Angle Male Connector. The ERmet 2 mm HM connector is manufactured for gas-tight, pressfit installation into a PCB, and is designed to mate with 2 mm HM right angle or vertical female connectors. This connector is available in 5 rows, with or without an upper shield and available in A, B25, B22, B19, and C modules....
LISTED UNDER: Interconnect, ConnectorsRF MEMS Switches
April 29, 2003 8:10 am | Product Releases | CommentsThis device is an ultra low loss, DC to 6 GHz RF MEMS single pole, double-throw (SPDT) switch. Frequency response is 300 kHz RF to 6 GHz. It possesses a high linearity, IP3 >65 dBm. With insensitivity to magnetic fields, it exhibits a low loss of 0.1 dB at 900 MHz, 0.3 dB at 6 GHz. Teravicta and Dow-Key Microwave have teamed up to market and distribute this RF MEMS switch....
LISTED UNDER: Switches, ICCMOS Switches
April 29, 2003 7:36 am | Product Releases | CommentsThe ADG918 and ADG919 are wideband CMOS switches that provide high isolation and low insertion loss at frequencies exceeding 1 GHz. The ADG918 is an absorptive switch, while the ADG919 is a reflective (matched) switch. Both offer low power consumption (5 microamps), tiny package sizes, and CMOS-compatible single-pin cont4rol voltage levels....
LISTED UNDER: Switches, ICESD Protected Connectors
April 29, 2003 7:27 am | Product Releases | CommentsSpectrum Control Series E connectors are capable of providing ESD/EFT and EMI protection all in one package, removing ground traces from the board and offering protection at the I/O ports and to all lines. The metallic front shell also provides low ground impedance. These connectors free up real estate by reducing the number of components necessary to protect circuits from ESD/EFT/EMI....
LISTED UNDER: Interconnect, ConnectorsTest Cable
April 29, 2003 7:27 am | Product Releases | CommentsThe MegaPhase® SuperFlex™ 26.5 GHz test temperature stable cable is phase and amplitude stable with temperature stability of < 7 ppm per °C from – 40° to +125°C. Operating temperature range is – 70° to +121°C. The phase and amplitude change versus flexure, measured for a 360° wrap around a 4....
LISTED UNDER: Interconnect, Cables | Services, Calibration / TestSMT Cable Connector
April 29, 2003 7:27 am | Product Releases | CommentsThe ERNI Group introduces a connector in SMT technology with a 1.27 mm pitch to provide a reliable connection from the board to external cables. The connector enables the connection between a PCB and an IDC ribbon cable with one component. The ribbon cable is easy to assemble with application tools developed for this purpose....
LISTED UNDER: Interconnect, CablesUSB Connectors
April 29, 2003 7:27 am | Product Releases | CommentsThe Mini USB Connector Series is designed for applications that require a high-speed data transfer interface in a compact package. The series consists of Type A, B, and AB connectors. The Mini USB connectors are shielded for EMI protection, polarized to prevent mis-mating, and rated for 5000 mating cycles....
LISTED UNDER: Interconnect, ConnectorsCables and Connectors
April 3, 2003 8:15 am | Product Releases | CommentsThe Serial ATA, a miniaturized version of the Parallel ATA but with double its data transfer capability is now available. With a transfer speed of 150 MB/sec. And a 7-pin interface, the Serial ATA will foster development of smaller packages with improved airflow. It will allow the use of 12 V, 3 V, and 3....
LISTED UNDER: Interconnect, Connectors | Interconnect, CablesDouble Shielded Cable
March 28, 2003 9:42 am | Product Releases | CommentsThe LA Series is a low loss double shielded cable that provides low attenuation and excellent phase stability and mechanical performance. It is ideal for applications up to 18 GHz requiring low loss performance and longer cable length interconnects, such as telecom and mil/aero. The LA Series uses silver plated inner and outer conductors for excellent attenuation performance....
LISTED UNDER: Interconnect, CablesD-SUB Connectors
March 28, 2003 9:42 am | Product Releases | CommentsShogyo D-SUB connectors are available with conductors ranging from 9 - 37 pins; steel-tin-plated or zinc-plated shells; pin contacts of brass, high-retention phosphorous-bronze or gold-plated nickel; plastic or metal hoods; in right angle and vertical mount. Features include: current ratings from 1 - 5 amps with dielectric strength of 1,000 V for 1 minute; insulator resistance rated at 1,000 M Ohms minimum at 500 V DC; temperature resistanc...
LISTED UNDER: Interconnect, ConnectorsCoaxial Cable Assemblies
March 28, 2003 3:52 am | Product Releases | CommentsTimes Microwave announces flexible, low loss coaxial cable assemblies with low levels of Passive Intermodulation Distortion or PIM. These assemblies are built from T-COM® cable and precision connectors. The construction of T-COM cable provides both low loss and excellent flex life and provides low PIM even when the cable is flexed....
LISTED UNDER: Interconnect, CablesShielded Cables
March 28, 2003 3:51 am | Product Releases | CommentsThese audio snake cables are for use in broadcast and high end audio applications requiring a plenum rated cable. Part number SN1624PL consists of 16 individually shielded and jacketed pairs with an overall jacket. The digital versions (24XPL Series) are also available in constructions of 2 - 24 pair with color coded conductors and no inner jackets....
LISTED UNDER: Interconnect, Cables
