Advertisement

Crystek Introduces 26.5 GHz Hand Formable Coaxial Cable Assembly

February 6, 2012 5:40 am | Product Releases | Comments

Crystek has introduced a line of 26.5 GHz Hand Formable Coaxial Cable Assemblies, a new addition to their Low-Loss RF Coaxial Cables. Designed to operate from DC to 26.5 GHz, the hand-formable CCSMA26.5-MM-086 Cable Assemblies are ideally suited for jumpers, instrumentation, and high-frequency interconnects.

LISTED UNDER: Interconnect, Cables
Advertisement

Small Two Piece Battery Connectors with Two Way Insertion

January 17, 2012 7:28 am | Product Releases | Comments

Due to popular demand, Yokowo’s two piece battery connectors has expanded and now will include a compact version. Featuring two less blades than the original 6-blade type, the new 4 blade model is designed to also allow for flexibility for both horizontal and vertical blade insertion. The compact size has also resulted in a reduction in pitch (from 3mm to 2.

LISTED UNDER: Interconnect, Connectors | Power, Batteries | Power, Battery

Discrete SOI Switches for Wireless Networking

January 3, 2012 11:06 am | Wireless Design & Development | Product Releases | Comments

Skyworks Solutions has introduced its first set of discrete silicon-on-insulator, single-pole, triple-throw switches for the wireless networking market. The SKY13345-368LF and SKY13385-460LF’s low insertion loss make the devices ideal for WLAN (802.11 b/g) and Bluetooth® applications in the 2.4 to 2.

LISTED UNDER: Embedded Systems & Networking | Switches, IC | Chipsets, Other

Portable Receiver Offers LTE and Cable System Interference Detection and Spectrum Clearing

November 30, 2011 11:44 am | Product Releases | Comments

Rohde & Schwarz has developed an advanced portable receiver and directional antenna for interference detection and spectrum clearing of LTE and cable systems. The R&S PR100 Series portable receiver operates in a wide frequency range from 9 kHz to 7.5 GHz, and when combined with the company’s HE300 Series GPS enabled directional antenna, is desirable for quickly detecting and locating sources of interference disrupting LTE and cable systems.

LISTED UNDER: Interconnect, Cables

Ruggedized SC/APC Connector and Cable Assemblies Optimize Signal Transmission

November 29, 2011 5:58 am | by Posted Janine E. Mooney, Editor | Product Releases | Comments

Molex Incorporated SC/APC indoor- and outdoor- rated cable assemblies and SC/APC 4.80mm connectors help customers and system integrators meet datacom and telecom design challenges, including adherence to industry standards and compatibility with standard cable sizes and fiber types. Designed for “Fiber to the x” (FTTx) and industrial applications, Molex SC/APC connector assemblies offer up to a 5.

LISTED UNDER: Interconnect, Cables

SPDT Switches Target High Power Access Points and Routers

November 23, 2011 9:15 am | Product Releases | Comments

vspace="5" align="right" src="http://www.ecnmag.com/sites/ecnmag.com/files/legacyimages/ECN/Products/2011/11/ec1112bcw306web.jpg" />Skyworks Solutions, Inc. has introduced a family of high power 50-Ohm terminated, single-pole, double throw switches. The small-package SKY13348-374LF and SKY13370-374LF are appropriate for high power access points and router applications given their matched ports which reduce low noise amplifier pulling and deliver better system performance.

LISTED UNDER: Switches, IC

Xirrus Extends XR Line of Modular Wireless Switches

November 22, 2011 5:52 am | Product Releases | Comments

Xirrus announced the XR-1000 and XR-2000 Wireless Arrays, extending the flexibility of the XR-series wireless switch platform to cover a broad range of wireless deployments. The XR-1000 model provides flexibility for delivering wireless service in low user density scenarios, challenging deployments in areas with high RF attenuation, and in isolated or physically separated locations.

LISTED UNDER: Switches, IC

RF Switches Support 6GHz Wi-Fi Applications

October 28, 2011 10:00 am | Product Releases | Comments

Renesas Electronics and California Eastern Laboratories (CEL) are now shipping two new high frequency GaAs MMIC SPDT switches, the UPG2422TK and the UPG2411T6R. Key Applications The UPG2422TK and the UPG2411T6R are ideal for Dual-band 802.11a,b,g,n Wi-Fi / WLAN, 5.8GHz Cordless Phones, 5.8GHz Electronic Toll Collection, and Mobile Communication applications.

LISTED UNDER: Switches, IC

GaAs SPDT Switches Target WLAN Applications

October 28, 2011 5:31 am | Product Releases | Comments

 Skyworks Solutions has introduced two small (1 x 1 mm packaged) GaAs single-pole, double-throw (SPDT) switches for WLAN applications.  The SKY13366-378LF (2.0-6.0 GHz) and the SKY13350-385LF (0.8-6.0 GHz) switches target low power WLAN consumer premise device equipment and offer exceptional RF performance including positive voltage control, very low insertion loss, high isolation and excellent linearity.

LISTED UNDER: Switches, IC

CN074 AdvancedMC Connectors for AdvancedTCA

October 20, 2011 6:28 am | Product Releases | Comments

- Compression Mount Contacts (CMT)  - High speed transmission 12.5 Gbps  - Complete product range: B, B+, AB, A+B+  - Integrated YFLEX technology  - Customized pin assignment possible  - Acc. to PICMG Spec. ATCA 3.0 R2.0   Insulation Resistance 100MO min.

LISTED UNDER: Interconnect, Connectors

P65 Series of Rotary Code Switches

October 19, 2011 7:45 am | by Posted Janine E. Mooney, Editor | Product Releases | Comments

APEM Components introduces the P65 series of rotary switches, a high temperature version of APEM’s PT65 dual in-line package (DIP) coded rotary switch. The P65 series is specially designed for high temperature soldering and is ideal for modern assembly processes. The P65 series is used in the automotive, communication, consumer electronics, and defense markets, as well as electrical appliances, industrial automation, and medical, among others.

LISTED UNDER: Switches, IC

DVI Family of Switches with the RDU-2P

October 14, 2011 7:49 am | Product Releases | Comments

SmartAVI announces the release of a new DVI-D Switch, the RDU-2P. The RDU-2P is a 2-Port DVI-D and USB 1.1 switch. It can extend DVI-D and USB 1.1 signals up to 275 feet over 2 STP cables. Designed in cooperation with studio engineers, the RDU-2P has both a local switch as well as a remote switch. This design allows users in a studio environment to switch between two computers without having to go to their physical location.

LISTED UNDER: Switches, IC

Two Piece Battery Connectors with Two Way Insertion

October 12, 2011 11:18 am | by Posted Janine E. Mooney, Associate Editor | Product Releases | Comments

Yokowo’s new two piece battery connector allows both horizontal and vertical blade insertion, as well as increased flexibility in designs. For reliability, the receptacle side features dual beam contact in both insertion directions. Two tabs are uniquely fitted on the receptacle to provide a secure grip around the blade upon insertion.

LISTED UNDER: Interconnect, Connectors | Power, Batteries | Power, Battery

7-16 DIN Adapter Comes in White Bronze Plating

October 4, 2011 10:57 am | Product Releases | Comments

RF Connectors’ The RFA-4013-WB adapter kit with white bronze plating offers a means to bridge type N devices to 7-16 DIN interfaces. The company’s legacy DIN adapters in the RFA-4013 are silver plated. Silver offers exceptional electrical performance and low PIM (Passive Intermodulation) performance.

LISTED UNDER: Interconnect, Adapters

UK Made Custom RF Connectors Delivered in 7 Weeks

September 22, 2011 12:33 pm | Product Releases | Comments

Intelliconnect, the UK based manufacturer of RF connectors, offers one of the widest ranges of standard Coaxial, Triaxial and Waterproof connectors available worldwide. In addition, their extensive design experience and UK sourced components allows Intelliconnect to offer an unrivalled custom connector design service.

LISTED UNDER: Interconnect, Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading