Advertisement

Custom Blind Mate Coaxial Connector/Adapter Mitigates Mechanical Misalignment

October 8, 2009 12:09 pm | Product Releases | Comments

Aviel Electronics, a division of RF Industries, offers custom blind mate connectors for specific applications. General design features include a non-threaded push-on connector interface for touch-less mating. One end of the pair provides a floating, spring mounted body that moves independent of the flange mount to ensure reliable electrical contact, even with some mechanical misalignment.

LISTED UNDER: Electromechanical / Mechanical | Interconnect, Adapters
Advertisement

MLCCs Protect Again Thermal and Mechanical Stress

December 30, 2008 7:21 am | Product Releases | Comments

AVX Corporation's MH Series multilayer ceramic capacitors (MLCCs) provide protection against thermal and mechanical stress. The RoHS-compliant devices are rated at up to 100 V with a max. capacitance of 22 µF, an operating temperature from -55°C to 125°C and non-polar construction. The Pb-free components perform as input/output capacitors for industrial and telecom applications, smoothing circuits, HID and automotive high-CV applicatio...

LISTED UNDER: Electromechanical / Mechanical

Micro Electro-mechanical Systems Testing and Failure Analysis Challenges

April 3, 2006 8:54 am | Product Releases | Comments

MEMS are being seen as one of the most promising emerging technologies to advance the development of next generation wireless devices. MEMS promises to shrink devices, lower power requirements and, most importantly, enable new and cutting-edge applications. By Ernest Worthman, Editorial Director Although MEMS (Micro Electro-Mechanical Systems) have been around for a number of years, only recently has the technology started to hit the m...

LISTED UNDER: Electromechanical / Mechanical | Services, Calibration / Test

Electromechanical Switches

October 28, 2003 10:16 am | Product Releases | Comments

Dow-Key introduces a family of VXI switches with SMA connectors offering three configurations: SP6T, Double SPDT, and a transfer switch. DC characteristics include 20 to 28 VDC (24 VDC nominal) operation voltage. Equipped with a failsafe actuator, these devices switch in 20 ms maximum. All three switches have the same control connector, but each model has its own pin-out that plugs into the universal control circuitry....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical | Switches, IC

RF Mechanical Switch

October 30, 2001 8:02 am | Product Releases | Comments

Narda has introduced a single-pole, three-throw RF mechanical switch that offers high performance and long-term reliability with a guaranteed operation of one million cycles per switch position....

LISTED UNDER: Electromechanical / Mechanical

Electro-Mechanical Switch

August 30, 2001 9:28 am | Product Releases | Comments

Teledyne Wireless has introduced a new electro-mechanical switch that operates at 75 Ohms within the DC to 3.0 GHz frequency range. The new SPDT switch is designed for applications requiring optimum RF performance and long life addressing the communications, test and measurement, aerospace and industrial markets where high-speed and high data rates are significant....

LISTED UNDER: Electromechanical / Mechanical

Electromechanical Transducer

June 20, 2001 5:03 am | Product Releases | Comments

Project Unlimited offers more sound output in a smaller package with its new SMT-753 electromechanical transducer. The new unit features a low profile package 3.5 mm in height with a sound output level of 98 dBA. Additional features of the SMT-753 include a voltage range from 3.0 V to 2.6 V and resonant frequency of 2839 Hz, SMD mounting....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical

Mechanical Angle

April 30, 2001 7:10 am | Product Releases | Comments

Piher expands its line of controls, position sensors, potentiometers, and encoders with the introduction of the new N-15 Series. This product features a low 4 mm profile, 36-° mechanical angle and electrical angle up to 340°, SMD or through-hole mounting, and 3% absolute linearity. It is available with 1% absolute linearity on a custom order basis....

LISTED UNDER: Electromechanical / Mechanical

Electromechanical Switch Line

February 21, 2001 8:23 am | Product Releases | Comments

Micronetics Wireless introduced its new MSM1 line of ultra-small, connectorized single pole, single throw electromechanical switches. The MSM1 series of switches measure.83× .37 before connector selection. The frequency range of the MSM1 series is from DC to 2.0 Ghz making them ideal for many wired and wireless RF communications applications....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical

Miniature Electromechanical Switch Line

February 21, 2001 8:22 am | Product Releases | Comments

Micronetics Wireless, Inc. announced today introduction of its new MSM1 line of ultra–small, connectorized single pole, single throw electromechanical switches.      The patent pending MSM1 series of switches are the smallest known electromechanical switches in the industry, measuring ....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical

Miniature Electromechanical Switches

February 13, 2001 9:49 am | Product Releases | Comments

Micronetics Wireless, Inc. announced the introduction of its new MSM1 line of ultra-small, connectorized single pole, single throw electromechanical switches. The patent pending MSM1 series of switches extremely small electromechanical switches, measuring .83inches× .37inches before connector selection....

LISTED UNDER: Electromechanical / Mechanical | Electromechanical / Mechanical | Switches, IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading