Advertisement

Components Corporation Reintroduces FJ Series

February 21, 2013 8:38 am | by WDD Staff | Product Releases | Comments

Components Corporation has reintroduced the FJ Series of printed circuit board Jumpers developed specifically for SMT applications in additional package sizes. The FJ-Series is a surface mount technology jumper, developed s for SMT applications.

LISTED UNDER: Boards & Modules | Development Kits / Platforms | Chipsets, Other

NI PXI Digitizer and LabVIEW Jitter Analysis Toolkit Increases Flexibility

February 13, 2013 9:15 am | by WDD Staff | Product Releases | Comments

National Instruments has announced the NI PXIe-5162 digitizer and updates to the LabVIEW Jitter Analysis Toolkit. The digitizer, with 10 bits of vertical resolution and a 5 GS/s sample rate, provides high-speed measurements at four times the vertical resolution of a traditional 8-bit oscilloscope.

LISTED UNDER: Development Kits / Platforms | Embedded Systems & Networking

EPC’s Development Board Demonstrates Ease of Designing

February 12, 2013 10:28 am | by WDD Staff | Product Releases | Comments

Efficient Power Conversion Corporation (EPC) has announced the availability of the EPC9004 development board, featuring EPC’s enhancement-mode gallium nitride (eGaN) field effect transistors (FETs). This board demonstrates how recently introduced IC gate drivers make the task of transitioning from silicon power transistors to higher performance eGaN FETs simple and cost effective.

LISTED UNDER: Boards & Modules | Development Kits / Platforms
Advertisement

Adafruit Pi Plate Kits Make Designing a Piece of Cake

February 11, 2013 9:56 am | by WDD Staff | Product Releases | Comments

Raspberry Pi fans can now easily add a display to their devices thanks to three new Adafruit Pi Plate kits, which are available at leading electronics distributor Newark element14. The kits enable a display to be added to the Raspberry Pi without the usual wiring difficulties.

LISTED UNDER: Development Kits / Platforms

dSPACE: Simulating Ethernet Networks in Real Time

February 11, 2013 9:55 am | by WDD Staff | Product Releases | Comments

With its new Ethernet Configuration Package, dSPACE enables the real-time simulation of service-oriented communication in Ethernet networks of electronic control units (ECUs). These networks play an important role in modern driver assistance systems, new comfort and entertainment functions, and numerous other functionalities.

LISTED UNDER: Development Kits / Platforms | Software, Design | Software, Development

AIR Module Family for ZigBee Standard and BoosterPack Kit

December 11, 2012 5:29 am | Wireless Design & Development | Product Releases | Comments

Anaren, Inc. announced that it has introduced a family of four Anaren Integrated Radio (AIR™) modules designed specifically to help OEMs develop products that wirelessly communicate in compliance with the ZigBee ® standard. Based on the Texas Instruments Incorporated (TI) CC2530 low-power RF SoC (which operates using TI's Z-Stack ™ firmware), the new family of AIR modules is bundled with AIR Support for ZigBee — a total solution that ...

LISTED UNDER: Development Kits / Platforms

Development Kit for NFC and Point-of-Sales Applications

November 20, 2012 5:44 am | Product Releases | Comments

AdvanIDe announced the Blue Board Development Kit by NXP powered by the NXP CLRC663 IC. The bundled kit speeds time to market by giving OEMs and design houses boards, software, card samples and direct engineering support in a single package. “Instead of using limited and expensive development resources for their NFC system development, customers can create plug-and-play solutions with the AdvanIDe development kit,” said Kay Plaumann, Line Manager RFID at AdvanIDe.

LISTED UNDER: Development Kits / Platforms

Expanded Connectivity Platform Includes Media Module and Development Kit

October 18, 2012 5:19 am | Product Releases | Comments

Microchip Technology Inc. announced its latest-generation SMSC JukeBlox® Wi-Fi® connectivity platform, featuring the JukeBlox 3.1-AAP (part # JB3.1-AAP) Software Development Kit (SDK) in combination with the new CX875 Wi-Fi Network Media Module. This platform expansion delivers highly integrated and specialized connectivity software along with a cost-optimized and fully certified CX875 Wi-Fi module, featuring the new, low-cost DM875 Network Media Processor and 8 MB of SDRAM to reduce BOM costs by up to 20%.

LISTED UNDER: Development Kits / Platforms
Advertisement

Lifetime Power Energy Harvesting Development Kit for Wireless Sensors

August 9, 2012 7:33 am | Product Releases | Comments

The Lifetime Power Energy Harvesting Development Kit for Wireless Sensors is a complete demonstration and development platform for creating battery-free wireless sensors (passive wireless sensor tags) powered by RF energy (radio waves). It is designed and configured for extremely low power operation, and the firmware is pre-installed for out-of-the-box operation.

LISTED UNDER: Development Kits / Platforms | Sensors & Transducers

Bluegiga WF111/WF121 Wi-Fi Modules Available at Mouser

July 11, 2012 7:28 am | Wireless Design & Development | Product Releases | Comments

Mouser Electronics announced it is stocking new Wi-Fi modules from Bluegiga Technologies. Bluegiga WF111/WF121 Embedded Wi-Fi® Modules offer small, reliable, long range Wi-Fi connectivity in an easy-to-integrate surface mount package. Both modules use Cambridge Silicon Radio's UniFi® CSR6031 chipset, which has excellent RF performance, low power-consumption, and compact size.

LISTED UNDER: Boards & Modules | Development Kits / Platforms

GP510: The First Dedicated ZigBee RF4CE Chip For Set-top Box and Gateway

July 5, 2012 8:17 am | Wireless Design & Development | Product Releases | Comments

GreenPeak Technologies announces the general availability of its GP510 communication controller chip, supporting all communication between ZigBee RF4CE enabled devices and the set-top box or gateway. The GP510 is GreenPeak’s answer to the increasing market demand for making the set-top box the ZigBee RF4CE hub for the home.

LISTED UNDER: Development Kits / Platforms

ARM Cortex-M Processor-based STM32 Series Development Kits

June 6, 2012 10:48 am | Wireless Design & Development | Product Releases | Comments

Premier Farnell has announced it is to extend its relationship with ARM through the launch of the latest series of ARM Cortex-M3 and Cortex–M4 processor-based STM32F2xx and STM32F4xx Development Kits across its distribution footprint in EMEA, China, and the Americas. The deal will see the kits shipped with Keil MDK-Lite Development Tools and the ULINK-ME™ Debug Adapter.

LISTED UNDER: Development Kits / Platforms | Development Kits / Platforms

New Reference Designs Enhance Embedded Function Block of Lattice MachXO2 PLD Family

June 5, 2012 6:33 am | Wireless Design & Development | Product Releases | Comments

Lattice Semiconductor Corporation today announced the immediate availability of four new reference designs for the low cost, low power MachXO2™ family of programmable logic devices (PLDs). The new reference designs simplify and enhance the usability of the built-in I2C, SPI and User Flash Memory functions in the MachXO2 device's unique Embedded Function Block (EFB).

LISTED UNDER: Development Kits / Platforms | Memory, Flash

STM32 - Bringing Intuitive Design to Everyday Electronic Equipment

May 14, 2012 5:48 am | Wireless Design & Development | Product Releases | Comments

Computerized devices such as white goods, office equipment and industrial controls could soon present users with rich graphical features such as animations and widgets, as seen in smartphones, thanks to new technology from STMicroelectronics (NYSE: STM), a global semiconductor leader serving customers across the spectrum of electronics applications.

LISTED UNDER: Development Kits / Platforms | Memory, Flash

New Development Kit from Teseq Helps Build Personalized Pulse Networks

April 26, 2012 7:55 am | Product Releases | Comments

New kit offers the ultimate in flexibility Teseq Inc. now offers a  development kit that allows automotive technicians and engineers to design their own pulse networks.  By using the FLX 5510 in conjunction with Teseq’s NSG 5500, automotive EMC laboratories can easily design their own pulses as well as meet unique and custom specifications including pulse impedance, peak voltage, pulse width and pulse width under load.

LISTED UNDER: Development Kits / Platforms

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading