Advertisement

Fully Integrated GPS Sensor Modules

February 26, 2007 10:55 am | Product Releases | Comments

NavSync announces its CW45A and CW46 GPS sensors, fully integrated modules that include a NavSync CW25 GPS receiver, a DC/DC converter, RS232, RS422 and USB interface options and an active GPS antenna that are all housed in a small weatherproof (IP56 rated) enclosure. The CW45A is a GPS navigational module, while the CW46 is a GPS timing module....

LISTED UNDER: Boards & Modules

UMTS/HSDPA and CDMA-dualband Modules

February 20, 2007 5:09 am | Product Releases | Comments

Telit Communications’ UMTS/HSDPAUC864 module provides high-speed connectivity while maintaining physical compatibility to its GSM/GPRS complementary, the GC864. The UC864 provides an instant upgrade path for applications benefiting from higher data rates and is EDGE-compatible. Also released is the CC864-Dual, a CDMA-1XRTT wireless module designed to have the same form, fit and function as its GSM/GPRS counterpart product, the GC864....

LISTED UNDER: Boards & Modules

Multi-Channel Modules

February 2, 2007 4:48 am | Product Releases | Comments

The LMT2 and LMR2 from Radiometrix Ltd. offer OEMs a multi-channel, power-conservative data link. This transmitter and receiver pair are appropriate for low-power applications where existing wideband modules lack the necessary range, or where low-cost multi-channel operation is required without causing any compromise to the system’s RF functionality....

LISTED UNDER: Boards & Modules
Advertisement

DC/DC-AC/DC Converter Modules

January 30, 2007 12:11 pm | Product Releases | Comments

Schaefer, Inc. introduces the C/B 6400 Series of 22,000 W, 8U high, 19" wide rack mount DC/DC and AC/DC converter modules. This compact and robust design provides a high density, space-saving solution for high power applications in industries such as railway controls and communications equipment (onboard and trackside), military applications, fuel cell applications, transportation, telecommunication systems, process control systems, and pow...

LISTED UNDER: Boards & Modules

Frequency Multiplier Modules

November 16, 2006 11:10 am | Product Releases | Comments

Hittite Microwave Corporation introduces four Active x2 Frequency Multiplier modules which provide output frequency coverage from 6 to 46 GHz. Each of these Active x2 Frequency Multipliers provide high output power, and excellent fundamental and sub-harmonic suppression for Microwave Communications, RADAR, Test Equipment and general laboratory applications.

LISTED UNDER: Boards & Modules

Wide-band Power Amplifier Modules

November 16, 2006 11:10 am | Product Releases | Comments

Hittite Microwave Corporation announces the release of two connectorized Wide-band Power Amplifier modules, which are suitable for EW, ECM, Radar and test equipment applications from 17 to 31 GHz. The HMC-C020 and the HMC-C021 are GaAs MMIC PHEMT power amplifiers in miniature, hermetic modules with replaceable 2.

LISTED UNDER: Boards & Modules

Wireless OEM Modules

October 19, 2006 8:40 am | Product Releases | Comments

Cirronet’s wireless OEM product line now includes two low-cost OEM modules based on the IEEE 802.15.4 standard. The LPR2400 (1 mW RF power) and LPR2400ER (extended range with 65 mW RF power) operate at 2.4 GHz for wireless communications in industrial and factory applications. Both include a Cirronet Networking Layer that eases integration and adds support for sophisticated networks through a simple-to-use command language....

LISTED UNDER: Boards & Modules

Wireless LAN Radio Modules

July 13, 2006 7:21 am | Product Releases | Comments

Summit Data Communications announces a family of 802.11g Wi-Fi modules designed for integration into application-specific devices (ASDs) like portable data terminals, bar code scanners, portable printers, medical devices and industrial equipment. The Summit modules provide the features required for reliable operation in business-critical ASDs and their environments....

LISTED UNDER: Boards & Modules
Advertisement

POL Power Modules

December 30, 2005 7:16 am | Product Releases | Comments

Tyco Electronics Power Systems announces its ATL series converters. These point-of-load (POL) DC/DC converters are designed to support battery power sourced applications. The ATL010A0X43-SRZ supports an input voltage range of 9 to 18 VDC, with a programmable output range of 0.75 to 5 VDC using an external resistor....

LISTED UNDER: Boards & Modules

High Density Memory Boards

December 8, 2005 7:52 am | Product Releases | Comments

Aitech Defense Systems, Inc. announces the C212 series of non-volatile memory VMEbus board configurations that use NAND Flash memory supported by software drivers to provide full hard-disk emulation for up to 128 GB of solid-state mass storage in COTS applications. Designed for high-speed write and erase performance, and providing a low cost-per-bit for data storage, the C212’s NAND Flash memory is useful for high-density data storage appli...

LISTED UNDER: Boards & Modules

PXI RF Test Modules

December 8, 2005 6:11 am | Product Releases | Comments

Aeroflex announces two PXI modules to address the need for high-speed testing of RFICs and other devices designed for Wireless Local Area Network (WLAN) and WiMax (Worldwide Interoperability for Microwave Access) applications. The two modules include the Aeroflex PXI 3025 6 GHz digital signal generator and the Aeroflex 3035 6 GHz wideband RF digitizer....

LISTED UNDER: Boards & Modules | Services, Calibration / Test

PXI Switch Modules

November 1, 2005 9:58 am | Product Releases | Comments

National Instruments announces the release of four 26.5 GHz PXI switch modules and the latest version of the company’s NI Switch Executive switch management software for PXI-based RF and microwave test applications. The switches, combined with the new per-path calibration capability of NI Switch Executive 2....

LISTED UNDER: Boards & Modules

DC/DC Converters and Control Modules

October 3, 2005 9:16 am | Product Releases | Comments

Vishay Intertechnology, Inc. announces that it is making all of its FunctionPAK® DC/DC converters and current control modules available in a new surface-mount adaptor board configuration to support engineering prototype assembly. While most production operations can handle the standard FunctionPAK surface-mount BGA configuration, the new SM versions of the FunctionPAK devices will facilitate the assembly process for any engineering lab t...

LISTED UNDER: Boards & Modules

RF Front-End Modules

August 3, 2005 6:34 am | Product Releases | Comments

SiGe Semiconductor introduces a trio of RF front-end modules for emerging Wi-Fi applications. The SE2521A40 delivers the efficiency and low power consumption required of embedded applications, including Wi-Fi VoIP phones; the SE2521A60 provides the balance of performance and low current consumption appropriate for PC client cards; and the SE2521A80 ensures high output power to boost the transmission range of Wi-Fi routers and access points....

LISTED UNDER: Boards & Modules

Broadband PA Modules

August 3, 2005 6:33 am | Product Releases | Comments

OPHIR RF power amplifier models 5303039D (20 to 1000 MHz) and 5303068A (800 to 2000 MHz) together cover the 20 to 2000 MHz frequency range at greater than 50 W RF output power at Psat, and can quickly be switched off to enhance system sensitivity in the Receive Mode. As a result, these modules are suitable for wideband communications and EW applications, which duplex receive and transmit functions....

LISTED UNDER: Boards & Modules

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading